FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS
1
2
3
4
5
6
7
8
HMC1169
NC 9
NC 10
GND 11
RFOUT/2 12
NC 13
NC 14
NC 15
NC 16
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
NC
NC
NC
NC
GND
NC
NC
NC
24
23
22
21
20
19
18
17
NC
NC
NC
VCC
NC
RFOUT
NC
NC
13947-001
Dual output frequency range
fOUT = 12.92 GHz to 14.07 GHz
fOUT/2 = 6.46 GHz to 7.035 GHz
Output power (POUT): 11.5 dBm
SSB phase noise: −113 dBc/Hz at 100 kHz
No external resonator needed
RoHS compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm²
NC
NC
NC
VTUNE
NC
NC
NC
NC
FEATURES
32
31
30
29
28
27
26
25
Data Sheet
12.92 GHz to 14.07 GHz MMIC VCO with
Half Frequency Output
HMC1169
Figure 1.
GENERAL DESCRIPTION
The HMC1169 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator (VCO) that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
Rev. A
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The output power is 11.5 dBm typical from a 5 V supply
voltage. The VCO is housed in a RoHS compliant LFCSP and
requires no external matching components.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2016–2018 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC1169
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................7
Applications ....................................................................................... 1
Theory of Operation .........................................................................9
Functional Block Diagram .............................................................. 1
Applications Information .............................................................. 10
General Description ......................................................................... 1
Evaluation Printed Circuit Board (PCB) ..................................... 11
Revision History ............................................................................... 2
Bill of Materials ........................................................................... 11
Specifications..................................................................................... 3
Packaging and Ordering Information ......................................... 12
Absolute Maximum Ratings ....................................................... 4
Outline Dimensions ................................................................... 12
ESD Caution .................................................................................. 4
Ordering Guide .......................................................................... 12
Pin Configuration and Function Descriptions ............................. 5
Interface Schematics..................................................................... 6
REVISION HISTORY
2/2018—Rev. 0 to Rev. A
Changes to Figure 15 ........................................................................ 8
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 12
1/2016—Revision 0: Initial Version
Rev. A | Page 2 of 12
Data Sheet
HMC1169
SPECIFICATIONS
TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted.
Table 1.
Parameter
FREQUENCY
Range
Output Frequency (fOUT)
Half Output Frequency (fOUT/2)
Drift Rate
Pulling
Pushing
OUTPUT POWER (POUT)
RFOUT
RFOUT/2
Supply Current (ICC)
HARMONICS, SUBHARMONICS
1/2
3/2
Second
Third
TUNING
Voltage (VTUNE)
Sensitivity
Tune Port Leakage Current
OUTPUT RETURN LOSS
SINGLE-SIDEBAND (SSB) PHASE NOISE
10 kHz Offset
100 kHz Offset
Min
Typ
12.92
6.46
Max
Unit
Test Conditions/Comments
14.07
7.035
GHz
GHz
MHz/°C
MHz p-p
MHz/V
Pulling into a 2.0:1 voltage standing wave ratio (VSWR)
At VTUNE = 5 V
dBm
dBm
mA
mA
mA
VCC = 4.75 V
VCC = 5.00 V
VCC = 5.25 V
1.2
2
4
7
−1
11.5
+3
200
220
240
15
+7
260
39
39
22
27
2
75
dBc
dBc
dBc
dBc
13
350
10
V
MHz/V
µA
dB
−82
−110
dBc/Hz
dBc/Hz
5
−86
−113
Rev. A | Page 3 of 12
VTUNE = 13 V
HMC1169
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
VCC
VTUNE
Operating Temperature Range
Storage Temperature Range
Nominal Junction Temperature (to
Maintain 1 Million Hours Mean Time to
Failure (MTTF))
Nominal Junction Temperature (TA = 85°C)
Maximum Reflow Temperature (MSL3
Rating)
Thermal Resistance (Junction to Ground
Paddle)
ESD Sensitivity
Human Body Model (HBM)
Field Induced Charged Device Model
(FICDM)
Rating
5.5 V dc
0 V to 15 V
−40°C to +85°C
−65°C to +150°C
135°C
119°C
260°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
29°C/W
300 V (Class 1A)
300 V (Class II)
Rev. A | Page 4 of 12
Data Sheet
HMC1169
32
31
30
29
28
27
26
25
NC
NC
NC
VTUNE
NC
NC
NC
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
2
3
4
5
6
7
8
HMC1169
TOP VIEW
(Not to Scale)
24
23
22
21
20
19
18
17
NC
NC
NC
VCC
NC
RFOUT
NC
NC
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS CAN BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE
PERFORMANCE OF THE DEVICE.
2. EXPOSED PAD. THE PACKAGE BOTTOM HAS AN EXPOSED
METAL PAD THAT MUST BE CONNECTED TO RF/DC GROUND.
13947-002
NC 9
NC 10
GND 11
RFOUT/2 12
NC 13
NC 14
NC 15
NC 16
NC
NC
NC
NC
GND
NC
NC
NC
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1 to 4, 6 to 10, 13 to 18, 20, 22 to 28,
30 to 32
5, 11
12
19
21
29
Mnemonic
NC
GND
RFOUT/2
RFOUT
VCC
VTUNE
EP
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting
the performance of the device.
Ground. These pins must be connected to RF/dc ground.
Half Radio Frequency Output. This pin is ac-coupled.
Radio Frequency Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the
drive source impedance.
Exposed Pad. The package bottom has an exposed metal pad that must be connected
to RF/dc ground.
Rev. A | Page 5 of 12
HMC1169
Data Sheet
INTERFACE SCHEMATICS
13947-003
RFOUT/2
Figure 6. VTUNE Interface
13947-004
Figure 3. RFOUT Interface
GND
Figure 4. RFOUT/2 Interface
Figure 7. GND Interface
10.5pF
13947-005
VCC
100pF
13947-007
RFOUT
Figure 5. VCC Interface
Rev. A | Page 6 of 12
13947-006
3nH
VTUNE
4pF
Data Sheet
HMC1169
15.0
280
14.5
270
14.0
+85°C
+25°C
–40°C
260
SUPPLY CURRENT (mA)
13.5
13.0
12.5
12.0
11.5
+85°C
+25°C
–40°C
11.0
250
240
230
220
210
200
10.5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
190
13947-008
10.0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
Figure 8. Output Frequency vs. Tuning Voltage (VTUNE)
13947-011
OUTPUT FREQUENCY (GHz)
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 11. Supply Current (ICC) vs. Tuning Voltage (VTUNE)
16
7.4
7.2
14
OUTPUT FREQUENCY (GHz)
10
8
6
4
+85°C
+25°C
–40°C
2
6.8
6.6
6.4
6.2
6.0
+85°C
+25°C
–40°C
5.8
5.6
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
5.2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
Figure 9. Output Power vs. Tuning Voltage (VTUNE)
13947-012
5.4
0
13947-009
OUTPUT POWER (dBm)
7.0
12
Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage (VTUNE)
14
1100
1000
+85°C
+25°C
–40°C
12
OUTPUT POWER (dBm)
800
700
600
500
400
300
+85°C
+25°C
–40°C
10
8
6
4
200
2
0
0
1
2
3
4
5
6
7
8
9
10
11
TUNING VOLTAGE (V dc)
12
13
Figure 10. Sensitivity vs. Tuning Voltage (VTUNE)
0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
Figure 13. RFOUT/2 Output Power vs. Tuning Voltage (VTUNE)
Rev. A | Page 7 of 12
13947-013
100
13947-010
SENSITIVITY (MHz/V)
900
HMC1169
Data Sheet
–60
–30
–65
–80
10kHz
–85
–90
–95
–100
–105
100kHz
–110
+85°C
+25°C
–40°C
–50
SSB PHASE NOISE (dBc/Hz)
–75
–60
–70
–80
–90
–100
–110
–120
–115
–125
0
1
2
3
4
5
6
7
8
9
10
11
12
TUNING VOLTAGE (V dc)
13
–140
1k
10k
100k
OFFSET FREQUENCY (Hz)
Figure 15. SSB Phase Noise vs. Offset Frequency at
Tuning Voltage (VTUNE) = 5 V
Figure 14. SSB Phase Noise vs. Tuning Voltage (VTUNE)
Rev. A | Page 8 of 12
1M
13947-015
–130
–120
13947-014
SSB PHASE NOISE (dBc/Hz)
–40
+85°C
+25°C
–40°C
–70
Data Sheet
HMC1169
THEORY OF OPERATION
The HMC1169 voltage controlled oscillator is a free running
voltage controlled frequency source. The output frequency is
controlled by applying a variable tune voltage to the VTUNE port.
Because VTUNE is varied from the lowest to the highest allowed
voltage, the VCO output frequency increases from the lowest to
the highest operating frequency. This VCO output frequency
change with the applied VTUNE input results in the VCO
frequency sensitivity characteristic (MHz/V). The VCO
frequency sensitivity is not constant and varies across the
tunable range.
The HMC1169 VCO is specified to cover the minimum to
maximum frequencies specified in this data sheet over the entire
specified temperature range, including the VCO frequency drift
(MHz/°C). In addition, for low phase noise operation, drive the
VTUNE port from a low noise voltage source. Excessive noise
on the VTUNE port results in poor phase noise performance.
The tune port modulation bandwidth is typically greater than
10 MHz.
To achieve optimum VCO phase noise performance when using
the HMC1169, it is important to use a low noise power supply
for VCC biasing. Because the VCO output frequency changes
with small changes in the VCC bias voltage (pushing), noise on
the VCC bias pin results in increased phase noise. Take care to
use low noise regulators, otherwise, bias line noise may corrupt
the low phase noise output of the HMC1169.
Internally, the radio frequency (RF) output frequency is generated
from a doubler circuit. This generation results in an unwanted
low level output signal present at half the RFOUT frequency
(RFOUT/2). If necessary, this undesired spurious signal can be
further filtered on the customer application board using a filter.
The RFOUT/2 output signal is available directly at the RFOUT/2
port. The RFOUT/2 port commonly drives a phase-locked loop
(PLL) synthesizer for phase locking the HMC1169 output if
needed.
Lastly, the HMC1169 RFOUT port incorporates an internal
buffer amplifier to provide good output matching. The internal
buffer amplifier also isolates the VCO core from the output load
and minimizes the VCO frequency change with the changes to
the output load impedance (pulling).
Rev. A | Page 9 of 12
HMC1169
Data Sheet
APPLICATIONS INFORMATION
monotonic tuning sensitivity allows a stable loop filter design.
The higher output power minimizes the gain required to drive
subsequent stages. The half frequency output reduces the input
frequency to the prescaler without the addition of residual phase
noise to the input of the phase-locked loop synthesizer.
The HMC1169 serves as the local oscillator (LO) in microwave
synthesizer applications. The primary applications are point to
point microwave radios, military, radars, test and measurement,
as well as industrial and medical equipment. The low phase
noise allows higher orders of modulation and offers improved bit
error rates in communication systems, whereas the linear,
LOOP
FILTER
HOST
SCK
SDI
SEN
SYNTH
CP
RFOUT
RFOUT/2
REF
VCO INPUT
Figure 16. Typical Application Diagram
Rev. A | Page 10 of 12
13947-016
VTUNE
XREFP
Data Sheet
HMC1169
13947-017
EVALUATION PRINTED CIRCUIT BOARD (PCB)
Figure 17. Evaluation PCB
The circuit board used in an application uses RF circuit design
techniques. Ensure that the signal lines have 50 Ω impedance
and that the package ground leads and backside ground paddle
are connected directly to the ground plane.
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
Figure 17 is available from Analog Devices, Inc., upon request.
BILL OF MATERIALS
Table 4. Bill of Materials for the EVAL-HMC1169
Item
J1 to J4
J5, J6
C1 to C3
C4
C5 to C7
C8
U1
PCB1
1
2
Description
PCB mount SMA RF connectors
2 mm dc headers
100 pF capacitors, 0402 package
1000 pF capacitor, 0402 package
2.2 μF tantalum capacitors
0.01 μF capacitor, 0603 package
HMC1169 VCO
110225 evaluation board2
Circuit board material is Rogers® 4350.
Reference this number when ordering the complete evaluation PCB.
Rev. A | Page 11 of 12
HMC1169
Data Sheet
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
DETAIL A
(JEDEC 95)
0.30
0.25
0.18
PIN 1
INDIC ATOR AREA OPTIONS
(SEE DETAIL A)
32
25
1
24
0.50
BSC
3.80
3.70 SQ
3.60
EXPOSED
PAD
17
TOP VIEW
0.90
0.85
0.80
8
16
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
PKG-004898
0.45
0.40
0.35
9
BOTTOM VIEW
3.50 REF
0.20 MIN
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
03-09-2017-B
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
Figure 18. 32-Lead Lead Frame Chip Scale Package [LFCSP]
5 mm × 5 mm Body and 0.85 mm Package Height
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
HMC1169LP5E
HMC1169LP5ETR
Temperature Range
−40°C to +85°C
−40°C to +85°C
MSL Rating 2
MSL3
MSL3
EV1HMC1169LP5
1
2
Package Description
32-Lead Lead Frame Chip Scale Package [LFCSP]
32-Lead Lead Frame Chip Scale Package [LFCSP],
7” Tape and Reel
Evaluation Board
The HMC1169LP5E and HMC1169LP5ETR are RoHS Compliant Parts.
See the Absolute Maximum Ratings section, Table 2.
©2016–2018 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13947-0-2/18(A)
Rev. A | Page 12 of 12
Package Option
HCP-32-1
HCP-32-1
Qty.
500