HMC129G8

HMC129G8 v02.1105 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4 - 8 GHz Typical Applications Features The HMC129G8 is ideal for: Conversion Loss: 8 dB • UNII & HiperLAN LO to RF and IF Isolation: 30 dB • Military & Space Small Size, No DC Bias Required • Test Equipment MIXERS - DBL-BAL - SMT 9 Functional Diagram General Description The HMC129G8 is a miniature double-balanced mixer in a hermetic surface mount package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. Noise figure is essentially equal to the conversion loss. The mixer can handle larger signal levels than most active mixers due to the high third order intercept. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/IF isolations. Electrical Specifi cations, TA = +25° C, LO Drive = +15 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF 9-6 Typ. Max. 4.0 - 8.0 Units GHz DC - 3 GHz Conversion Loss 8 10 dB Noise Figure (SSB) 8 10 dB LO to RF Isolation 20 30 LO to IF Isolation 20 30 dB dB IP3 (Input) 13 18 dBm IP2 (Input) 35 40 dBm 1 dB Gain Compression (Input) 5 10 dBm For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC129G8 v02.1105 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4 - 8 GHz Conversion Loss Isolation 0 -10 RF/IF -10 -20 LO/IF -30 LO/RF -50 -60 -20 0 1 2 3 4 5 6 7 8 9 10 0 11 1 2 3 RF FREQUENCY (GHz) 4 5 6 7 8 FREQUENCY (GHz) 9 10 11 Distortion and 1dB Compression versus LO Drive Level Return Loss Distortion 0 RETURN LOSS (dB) 9 -40 -15 LO Drive -5 RF LO IF -10 -15 RF (f1) = 6.01 GHz RF (f2) = 6.00 GHz LO = 6.5 GHz RF Level = 0 dBm 1 dB Compression (dBm) IP3 (dBm) IP2 (dBm) P1dB (dBm) +7 14 59 8.5 +10 16 62 10 +13 18 65 11 +15 19 65 11 -20 0 1 2 3 4 5 6 7 8 9 10 MIXERS - DBL-BAL - SMT -5 ISOLATION (dB) CONVERSION LOSS (dB) 0 11 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9-7 HMC129G8 v02.1105 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4 - 8 GHz Absolute Maximum Ratings MIXERS - DBL-BAL - SMT 9 LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -55 to +125 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 50 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9-8 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC129G8 v02.1105 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4 - 8 GHz Evaluation PCB MIXERS - DBL-BAL - SMT 9 List of Materials for Evaluation PCB 104882 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC129G8 Mixer PCB [2] 104880 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9-9