HMC189AMS8E

HMC189AMS8 / 189AMS8E v03.0714 Typical Applications Features The HMC189AMS8(E) is suitable for: Conversion Loss: 13 dB • Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 33 dB • LMDS, VSAT, and Point-to-Point Radios Input Drive Level: +10 to +15 dBm • UNII & HiperLAN TE • Test Equipment Functional Diagram General Description LE The HMC189AMS8(E) is a miniature passive frequency doublers in plastic 8-lead MSOP packages. The suppression of undesired fundamental and higher order harmonics is 33 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal. B SO FREQ. MULTIPLIERS - PASSIVE - SMT GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT O Electrical Specifications, TA = +25° C, As a Function of Drive Level Parameter Input = +10 dBm Min. Frequency Range, Input Frequency Range, Output Conversion Loss 1 Typ. Input = +13 dBm Max. Min. Typ. Input = +15 dBm Max. Min. Typ. Max. Units 2.5 - 3.5 2.5 - 3.75 2-4 GHz 5-7 5 - 7.5 4-8 GHz 13 17 13 15 13 17 dB FO Isolation (with respect to input level) 29 32 30 33 31 34 dB 3FO Isolation (with respect to input level) 37 43 35 42 33 40 dB 4FO Isolation (with respect to input level) 32 40 33 40 31 40 dB Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC189AMS8 / 189AMS8E v03.0714 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Conversion Loss @ +13 dBm Drive Level Isolation* @ +13 dBm Drive Level 0 -10 -10 ISOLATION (dB) -15 -20 -40C +25C +85C -25 1F0 3F0 4F0 -20 -30 -40 TE CONVERSION LOSS (dB) -5 -50 -30 -35 -60 2 3 4 5 6 7 8 9 10 0 OUTPUT FREQUENCY (GHz) 2 4 6 8 10 12 14 16 18 20 18 20 FREQUENCY (GHz) Conversion Loss vs. Drive Level Isolation* @ +10 dBm Drive Level 0 0 +7 dBm +10 dBm +13 dBm +15 dBm -15 -20 -25 -30 -35 2 B SO -10 -10 3 4 5 6 7 8 9 ISOLATION (dB) -5 CONVERSION LOSS (dB) LE * With respect to input level 1F0 3F0 4F0 -20 -30 -40 -50 -60 -70 10 0 2 4 6 OUTPUT FREQUENCY (GHz) 8 10 12 14 16 FREQ. MULTIPLIERS - PASSIVE - SMT 0 FREQUENCY (GHz) * With respect to input level Output Return Loss for Several Input Frequencies 0 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) O Input Return Loss vs. Drive Level -10 -15 +7 dBm +10 dBm +13 dBm -20 Input=2 GHz Input=3 GHz Input=4 GHz -10 -15 -20 -25 -25 1 2 3 FREQUENCY (GHz) 4 5 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC189AMS8 / 189AMS8E v03.0714 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Input Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1B ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO LE TE Outline Drawing O FREQ. MULTIPLIERS - PASSIVE - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC189AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC189AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] 189A XXXX 189A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC189AMS8 / 189AMS8E v03.0714 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 2 - 4 GHz INPUT Pin Description 1, 4, 5, 8 N/C 2 RFIN Pin is DC coupled and matched to 50 Ohms from 2.0 to 4.0 GHz 3, 6 GND All ground leads must be soldered to PCB RF/DC ground. 7 RFOUT Pin is DC coupled and matched to 50 Ohms from 4.0 to 8.0 GHz O B SO Evaluation PCB Interface Schematic FREQ. MULTIPLIERS - PASSIVE - SMT Description These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. TE Function LE Pin Number List of Materials for Evaluation PCB 103313 [1] Item Description J1, J2 PCB Mount SMA Connector U1 HMC189AMS8(E) Doubler PCB [2] 103311 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4