HMC208AMS8ETR

HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz Typical Applications Features The HMC208AMS8 / HMC208AMS8E is ideal for: Ultra Small Package: MSOP8 • Base Stations Conversion Loss: 9 dB • PCMCIA Transceivers LO / RF Isolation: 24 dB • Cable Modems Input IP3: +17 dBm TE • Portable Wireless Functional Diagram General Description LE The HMC208AMS8 & HMC208AMS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. B SO MIXERS - DBL-BAL - SMT 9 O Electrical Specifications, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 70 MHz Parameter Min. Frequency Range, RF & LO 0.7 - 2.0 Frequency Range, IF DC - 0.5 Conversion Loss Noise Figure (SSB) 0-1 Typ. LO = +10 dBm IF = 70 MHz Max. Min. Typ. Units Max. 0.8 - 1.2 GHz DC - 0.5 9 10.5 9 10.5 GHz 8.5 10.5 dB 8.5 10.5 dB LO to RF Isolation 20 24 32 40 dB LO to IF Isolation 13 17 22 30 dB RF to IF Isolation 10 14 17 22 dB IP3 (Input) 13 17 12 16 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz Conversion Loss vs Temperature @ LO = +13 dBm ISOLATION (dB) -40 C +25 C +85 C -15 1 -40 RF/IF LO/IF LO/RF -50 1.5 2 -60 0.5 2.5 1 1.5 2 2.5 FREQUENCY (GHz) Conversion Loss vs. LO Drive LE FREQUENCY (GHz) Return Loss @ LO = +13 dBm 0 0 +7 dBm +9 dBm +11 dBm -5 -10 -15 -20 0.5 +13 dBm +15 dBm -5 B SO CONVERSION LOSS (dB) -30 TE -10 -20 1 1.5 2 MIXERS - DBL-BAL - SMT -10 -5 RETURN LOSS (dB) CONVERSION LOSS (dB) 0 -20 0.5 -10 -15 RF IF LO -20 -25 0 2.5 0.5 1 FREQUENCY (GHz) 1.5 2 2.5 FREQUENCY (GHz) P1dB vs. Temperature @ LO = +13 dBm O IF Bandwidth @ LO = +13 dBm 0 14 -5 13 P1dB (dBm) CONVERSION LOSS (dB) 9 Isolation @ LO = +13 dBm 0 -10 -15 -20 -40 C +25 C +85 C 12 11 10 -25 0 0.2 0.4 0.6 IF FREQUENCY (GHz) 0.8 1 9 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-2 HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz 9 Input IP3 vs. Temperature @ LO = +13 dBm Input IP3 vs. LO Drive 25 +9 dBm +11 dBm +13 dBm IP3 (dBm) 20 0.8 1 1.2 1.4 1.6 1.8 15 0.6 2 1.2 1.4 1.6 1.8 2 1.8 2 LE 70 70 60 B SO 60 20 0.6 1 Input IP2 vs. Temperature @ LO = +13 dBm Input IP2 vs. LO Drive 30 0.8 LO FREQUENCY (GHz) LO FREQUENCY (GHz) 40 19 17 10 50 21 TE 15 5 0.6 -40 C +25 C +85 C 23 +9 dBm +11 dBm +13 dBm 0.8 1 1.2 1.4 1.6 2 50 40 -40 C +25 C +85 C 30 20 0.6 0.8 1 1.2 1.4 1.6 LO FREQUENCY (GHz) O LO FREQUENCY (GHz) 1.8 IP2 (dBm) IP3 (dBm) 25 IP2 (dBm) MIXERS - DBL-BAL - SMT 30 0-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz 9 Harmonics of LO nLO nLO Spur at RF Port mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 2 28 16 51 0.7 49 47 41 73 12 0 43 45 29 0.9 44 50 39 68 73 64 69 61 78 1.1 38 50 50 97 3 68 >95 87 63 92 1.3 37 52 47 85 4 >95 >95 >95 >95 >95 1.5 32 80 58 90 1.7 29 58 63 99 RF = 0.9 GHz @ -10 dBm LO = 0.97 GHz @ +13 dBm All values in dBc relative to the IF TE 1 2 Absolute Maximum Ratings +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO RF / Input LE LO = +13 dBm Values in dBc below input LO level measured at RF Port. MIXERS - DBL-BAL - SMT MxN Spurious Outputs Class 1A O ESD Sensitivity (HBM) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-4 HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz Outline Drawing LE TE MIXERS - DBL-BAL - SMT 9 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] B SO 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Package Body Material Lead Finish HMC208AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC208AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] O Part Number MSL Rating Package Marking [3] H208A XXXX H208A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 0-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC208AMS8 / 208AMS8E v00.0411 GaAs MMIC SMT DOUBLEBALANCED MIXER, 0.7 - 2.0 GHz TE LE B SO MIXERS - DBL-BAL - SMT 9 Evaluation PCB O List of Materials for Evaluation PCB 101830 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC208AMS8 / HMC208AMS8E Mixer PCB [2] 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-6