HMC213AMS8ETR

HMC213AMS8 / 213AMS8E v02.1210 10 - 1 Typical Applications Features The HMC213AMS8(E) is ideal for: Ultra Small Package: MSOP8 • Base Stations Conversion Loss: 8.5 dB • PCMCIA Transceivers LO / RF Isolation: 40 dB TE • Wireless Local Loop Functional Diagram General Description B SO LE The HMC213AMS8(E) is a ultra miniature doublebalanced mixer in 8 lead plastic surface mount package (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive O Mixers - SINGLE & DOUBLE BALANCED - SMT 10 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz LO = +13 dBm IF = 100 MHz Parameter Min. Typ. LO = +10 dBm IF = 100 MHz Max. Min. Typ. Frequency Range, RF & LO 1.5 - 4.5 1.7 - 3.6 Frequency Range, IF DC - 1.5 DC - 1.5 Conversion Loss Noise Figure (SSB) 8.5 10 8.5 10 Units Max. GHz GHz 9 10.5 dB 9 10.5 dB LO to RF Isolation 29 40 32 40 dB LO to IF Isolation 27 35 26 35 dB IP3 (Input) 16 19 14 18 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213AMS8 / 213AMS8E v02.1210 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 -40 C +25 C +85 C -15 -40 -50 -60 1 1.5 2 2.5 3 3.5 4 4.5 5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) LE FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +13 dBm 0 0 -10 B SO -5 +9 dBm +11 dBm +15 dBm -15 -20 1 1.5 2 2.5 3 3.5 4 4.5 -5 -10 RF IF LO -15 -20 5 0 0.5 1 1.5 FREQUENCY (GHz) 0 2.5 3 P1dB (dBm) 12 11 10 -20 FREQUENCY (GHz) 5 13 -40 C +25 C +85 C 9 1 4.5 14 LO=1.8 GHz, RF=1.9 to 4.9 GHz LO=4.4 GHz, RF=1.3 to 4.3 GHz 0.5 4 15 -10 0 3.5 16 -5 -15 2 FREQUENCY (GHz) P1dB vs. Temperature @ LO = +13 dBm O IF Bandwidth @ LO = +13 dBm CONVERSION GAIN (dB) 10 -30 TE -10 -20 1.5 2 8 1.5 Mixers - SINGLE & DOUBLE BALANCED - SMT ISOLATION (dB) -5 -20 CONVERSION GAIN (dB) RF/IF LO/IF LO/RF -10 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC213AMS8 / 213AMS8E v02.1210 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz Input IP3 vs. Temperature @ LO = +13 dBm Input IP3 vs. LO Drive 10 - 3 +11 dBm +15 dBm +13 dBm 15 2 2.5 3 3.5 4 4.5 3 3.5 4 4.5 5 4.5 5 LE 64 B SO 56 2 2.5 3 3.5 4.5 5 56 52 48 44 40 1.5 2 2.5 3 3.5 4 LO FREQUENCY (GHz) O LO FREQUENCY (GHz) 4 -40C +85C +25C 60 INPUT IP2 (dBm) +11 dBm +15 dBm +13 dBm 60 40 1.5 2.5 Input IP2 vs. Temperature @ LO = +13 dBm 64 44 2 LO FREQUENCY (GHz) Input IP2 vs. LO Drive 48 -40C +85C +25C 15 10 1.5 5 LO FREQUENCY (GHz) 52 20 TE INPUT IP3 (dBm) 25 20 10 1.5 INPUT IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 INPUT IP3 (dBm) 25 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213AMS8 / 213AMS8E v02.1210 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz Harmonics of LO @ RF Port nLO nLO Spur mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 12.7 20.8 19.8 76.2 1.5 40 30 62 57 1 13.4 0 39.8 38.9 56.2 2.0 38 25 55 58 2 73.8 78.2 66.5 82.2 68.8 2.5 41 28 34 61 93.8 89.2 92.2 82.4 89.0 3.0 41 35 36 61 >105 >105 >105 >105 >105 3.5 38 45 52 62 62 RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level (-1RF + 1LO) TE 3 4 4.0 35 47 55 4.5 33 50 65 73 5.0 32 52 68 82 Absolute Maximum Ratings LE LO = +13 dBm Values in dBc below input LO level measured at RF Port. +13 dBm LO Drive +27 dBm Continuous Pdiss (T = 85 °C) (derate 10.6 mW/°C above 85 °C) 0.69 W Thermal Resistance (Channel to package lead) 93.7 °C/W Junction Temperature 150 °C Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS O B SO RF / IF Input Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT MxN Spurious Outputs 10 - 4 HMC213AMS8 / 213AMS8E v02.1210 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz Outline Drawing 10 - 5 TE LE NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. B SO 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC213AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC213AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] O Mixers - SINGLE & DOUBLE BALANCED - SMT 10 MSL Rating Package Marking [3] 213A XXXX 213A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213AMS8 / 213AMS8E v02.1210 GaAs MMIC SMT DoubleBalanced Mixer, 1.5 - 4.5 GHz Evaluation PCB O List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC213AMS8(E) Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT B SO LE TE 10 10 - 6