HMC218BMS8GE

HMC218BMS8GE v01.0616 MIXERS - DOUBLE-BALANCED - SMT GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz Typical Applications Features The HMC218BMS8GE is ideal for: Passive Double-Balanced Topology • Base stations, Repeaters & Access Points Input IP3: +17 dBm • WiMAX, WiBro & Fixed Wireless Low Conversion Loss: 7 dB • Portables & Subscribers LO to RF Isolation: 38 dB • PLMR, Public Safety & Telematics LO to IF Isolation: 32 dB Up-converter & Down-converter Applications Functional Diagram General Description The HMC218BMS8GE is an ultra miniature double-balanced mixers in an 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an up-converter, down-converter, bi-phase modulator / demodulator, or phase comparator. This mixer performs well when used as a down-converter from 3.5 to 8 GHz and as an up-converter from 4.5 to 8 GHz. The low conversion loss, high isolation and wide IF bandwidth make this mixer ideal for a variety of Rx and Tx frequency plans. Electrical Specifications, TA = +25 °C, IF = 100 MHz, LO = +13 dBm, LSB [1] Parameter Min. Typ. Frequency Range, RF 3.5 - 4.5 Frequency Range, LO 3.5 - 4.5 Frequency Range, IF DC - 1.6 Conversion Loss IP3 (Input) 9 10 IP2 (Input) 13 Max. Min. Typ. Max. 4.5 - 6 12.5 45 Typ. Max. Units 6-8 GHz 4.5 - 6 6- 8 GHz DC- 1.6 DC - 1.6 GHz 7 12.5 Min. 8.5 7 dB 17 17 dBm 45 45 dBm 1 dB Gain Compression (Input) 10 10 11 dBm LO to RF Isolation 42 38 36 dB 32 40 dB LO to IF Isolation 20 30 15 [1] Unless otherwise noted, all measurements performed as down-converter with high side LO, IF = 100 MHz, RFIN = -10 dBm 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz High Side LO, Down-converter Performance, IF = 100 MHz Conversion Loss vs. LO Drive RFIN = -10 dBm, LSB 0 CONVERSION LOSS (dB) CONVERSION LOSS (dB) 0 -4 -8 -12 -16 -20 3.5 4 4.5 5 5.5 6 6.5 7 7.5 -4 -8 -12 -16 -20 3.5 8 4 4.5 5 FREQUENCY (GHz) +25 C +85 C 20 20 16 16 IP3 (dBm) IP3 (dBm) 24 12 8 4 4 5 5.5 6 6.5 7 7.5 0 3.5 8 4 4.5 5 +85 C 60 60 50 50 IP2 (dBm) IP2 (dBm) 70 40 30 20 20 5 5.5 6 6.5 7 7.5 8 10 3.5 4 4.5 FREQUENCY (GHz) +25 C +85 C 6 6.5 7 7.5 8 + 13 dBm + 15 dBm 40 30 4.5 5.5 Input IP2 vs. LO Drive RFIN = -10 dBm, LSB 70 4 8 +13 dBm +15 dBm + 9 dBm + 11 dBm -40 C Input IP2 vs. Temperature LO = +13 dBm, RFIN = -10 dBm, LSB 10 3.5 7.5 FREQUENCY (GHz) FREQUENCY (GHz) +25 C 7 12 8 4.5 6.5 Input IP3 vs. LO Drive RFIN = -10 dBm, LSB 24 4 6 +9 dBm +11 dBm -40 C Input IP3 vs. Temperature LO = +13 dBm, RFIN = -10 dBm, LSB 0 3.5 5.5 FREQUENCY (GHz) MIXERS - DOUBLE-BALANCED - SMT Conversion Loss vs. Temperature LO = +13 dBm, RFIN = -10 dBm, LSB 5 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) -40 C +9 dBm +11 dBm +13 dBm +15 dBm For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2 HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz High Side LO, Down-converter Performance, IF = 100 MHz Input IP3 vs. IF LO = +13 dBm, RFIN = -10 dBm, LSB 24 20 -4 16 IP3 (dBm) CONVERSION LOSS (dB) 0 -8 -12 12 8 -16 -20 3.5 4 4 4.5 5 5.5 6 6.5 7 7.5 0 3.5 8 4 4.5 5 100 MHz 600 MHz 6 6.5 7 100 MHz 600 MHz 1100 MHz 1600 MHz Input IP2 vs. IF LO = +13 dBm, RFIN = -10 dBm, LSB 7.5 8 1100 MHz 1600 MHz Conversion Loss over IF Bandwidth @ LO = 6 GHz, LO Power = +13 dBm, LSB 70 0 CONVERSION LOSS (dB) 60 50 40 30 20 10 3.5 4 4.5 5 5.5 6 6.5 7 7.5 -4 -8 -12 -16 -20 0.1 8 0.4 0.7 1 FREQUENCY (GHz) 1100 MHz 1600 MHz +25 C Input IP3 over IF Bandwidth, LO = 6 GHz LO Power = +13 dBm, LSB 1.6 1.9 2.2 2.5 2.8 3.1 +85 C -40 C LO to RF and LO to IF Isolation LO Power = +13 dBm 24 50 45 20 40 ISOLATION (dB) CONVERSION LOSS (dB) 1.3 IF FREQUENCY (GHz) 100 MHz 600 MHz 16 12 8 35 30 25 20 4 0 0.1 15 0.4 0.7 1 1.3 1.6 1.9 2.2 2.5 2.8 3.1 10 3.5 4 4.5 5 IF FREQUENCY (GHz) +25 C 3 5.5 FREQUENCY (GHz) FREQUENCY (GHz) IP2 (dBm) MIXERS - DOUBLE-BALANCED - SMT Conversion Loss vs. IF LO = +13 dBm, RFIN = -10 dBm, LSB +85 C 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) -40 C LO/RF LO/IF For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz High Side LO, Down-converter Performance, IF = 100 MHz 20 20 16 16 12 8 4 12 8 4 0 3.5 4 4.5 5 5.5 6 6.5 7 7.5 0 3.5 8 4 4.5 FREQUENCY (GHz) +25 C +85 C 5.5 6 6.5 7 7.5 +9 dBm +11 dBm -40 C 8 10 10 6 6 2 -2 +13 dBm +15 dBm Output P1dB vs. LO Power IF = 100 MHz P1dB (dBm) P1dB (dBm) 5 FREQUENCY (GHz) Output P1dB vs. Temperature LO Power = +13 dBm, IF = 100 MHz 2 -2 -6 -6 -10 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 -10 3.5 4 4.5 +25 C 5 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) FREQUENCY (GHz) +85 C +9 dBm +11 dBm -40 C RF, LO, IF Return Loss @ LO = 4.6GHz LO Power = +13 dBm +13 dBm +15 dBm M x N Spurious Outputs, IF = 100 MHz 0 nLO mRF -7 RETURN LOSS (dB) MIXERS - DOUBLE-BALANCED - SMT Input P1dB vs. LO Power IF = 100 MHz, P1dB (dBm) P1dB (dBm) Input P1dB vs. Temperature LO Power = +13 dBm, IF = 100 MHz 0 0 -14 -21 -28 -35 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) RF IF LO 1 2 3 4 3.4 32.5 25.6 52.1 5 11.2 1 13.4 31.9 57.7 45.3 54.2 2 67.3 45.9 60.5 51.6 76.3 72.1 3 82.1 92.4 70.8 52 73.5 93.2 4 86.9 90.6 93.9 75.7 88.6 82.3 5 84 89.2 88.3 93.4 96 78.2 RF = 5.15 GHz @ -10 dBm LO = 5.25 GHz @ +13 dBm All values in dBc below IF power level (LO - RF) LSB Spur values are (M x RF) - (N x LO) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 4 HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz Low Side LO, Up-converter Performance, IF = 100 MHz Conversion Loss vs. LO Drive RFIN = -10 dBm, USB 0 CONVERSION LOSS (dB) CONVERSION LOSS (dB) 0 -4 -8 -12 -16 -20 3.5 4 4.5 5 5.5 6 6.5 7 7.5 -4 -8 -12 -16 -20 3.5 8 4 4.5 +25 C +85 C 20 20 16 16 IP3 (dBm) 24 12 8 4 4 5 5.5 6 6.5 +25 C 7 7.5 0 3.5 8 +85 C 4 4.5 50 40 40 IP2 (dBm) IP2 (dBm) 50 30 20 10 10 5.5 6 6.5 7 7.5 8 0 3.5 4 4.5 FREQUENCY (GHz) +25 C +85 C 5.5 6 6.5 7 7.5 8 +13 dBm +15 dBm 30 20 5 5 Input IP2 vs. LO Drive RFIN = -10 dBm, USB 60 4.5 8 +13 dBm +15 dBm +9 dBm +11 dBm -40 C 60 4 7.5 FREQUENCY (GHz) Input IP2 vs. Temperature LO = +13 dBm, RFIN = -10 dBm, USB 0 3.5 7 12 8 4.5 6.5 Input IP3 vs. LO Drive RFIN = -10 dBm, USB 24 4 6 +9 dBm +11 dBm -40 C Input IP3 vs. Temperature LO = +13 dBm, RFIN = -10 dBm, USB 0 3.5 5.5 FREQUENCY (GHz) FREQUENCY (GHz) 5 5 FREQUENCY (GHz) IP3 (dBm) MIXERS - DOUBLE-BALANCED - SMT Conversion Loss vs. Temperature LO = +13 dBm, RFIN = -10 dBm, USB 5 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) -40 C +9 dBm +11 dBm +13 dBm +15 dBm For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz Low Side LO, Up-converter Performance Conversion Loss vs. IF LO = +13 dBm, RFIN = -10 dBm, USB 24 20 -4 16 IP3 (dBm) CONVERSION LOSS (dB) 0 -8 -12 12 8 -16 -20 3.5 4 4 4.5 5 5.5 6 6.5 7 7.5 0 3.5 8 4 4.5 5 FREQUENCY (GHz) 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) 100 MHz 600 MHz 1100 MHz 1600 MHz 100 MHz 600 MHz 1100 MHz 1600 MHz Input IP2 vs. IF LO = +13 dBm, RFIN = -10 dBm, USB 60 50 IP2 (dBm) 40 30 20 10 0 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 MIXERS - DOUBLE-BALANCED - SMT Input IP3 vs. IF LO = +13 dBm, RFIN = -10 dBm, USB FREQUENCY (GHz) 100 MHz 600 MHz 1100 MHz 1600 MHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 6 HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz MIXERS - DOUBLE-BALANCED - SMT Absolute Maximum Ratings RF Power Input +13 dBm LO Power +27 dBm Channel Temperature 150 °C Thermal Resistance (RTH) (junction to ground paddle) 120 °C/W Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C ESD Sensitivity (HBM) 750 V (Class 1B) ESD Sensitivity (CDM) 1000 V (Class C5) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Package Information Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] HMC218BMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H218B XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C 7 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz Pin Descriptions Function Description 1 LO This pin is DC coupled and matched to 50 Ohms. 2, 3, 6, 7 GND These pins and package bottom must be connected to RF/DC ground. 4 N/C No connected required. Pins are not connected internally. However, all data shown herein was measured with theses pins connected to RF/DC ground internally. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohms. Pin Schematic For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D MIXERS - DOUBLE-BALANCED - SMT Pin Number 8 HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz MIXERS - DOUBLE-BALANCED - SMT Evaluation PCB List of Material for Evaluation PCB EV1HMC218BMS8G [1] Item Description J1, J3 PCB Mount SMA RF Connector U1 HMC218BMS8GE PCB [2] 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC218BMS8GE v01.0616 GaAs MMIC DOUBLE-BALANCED MIXER 3.5 - 8 GHz MIXERS - DOUBLE-BALANCED - SMT Notes: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 10