HMC244G16

HMC244G16 v02.1105 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Features The HMC244G16 is ideal for: Low Insertion Loss: 0.7 dB • Telecom Infrastructure Non-Reflective Design • Military Radios, Radar & ECM Integrated 2:4 TTL Decoder • Space Applications Single Positive Suppy: Vdd = +5V • Test Instrumentation 16 Lead Hermetic SMT Package Functional Diagram General Description TE Typical Applications The HMC244G16 is a non-reflective SP4T switch in a 16 lead glass/metal (hermetic) package. Covering DC to 4 GHz, the switch offers 30~50 dB isolation and a low insertion loss of 0.7 dB through 3 GHz. A 2:4 TTL/CMOS compatable decoder is integrated on the switch requiring only 2 control lines and a positive 5V bias to select each path, replacing 8 control lines normally required by GaAs SP4T switches. SO SWITCHES - SMT LE 10 B Electrical Specifi cations, TA = +25° C, With 0/+5V Control, 50 Ohm System Parameter Insertion Loss Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 4.0 GHz O 10 - 118 Frequency DC - 1.0 GHz DC - 3.0 GHz DC - 3.5 GHz DC - 4.0 GHz Min. 40 36 30 24 Typ. Max. Units 0.6 0.7 1.0 1.4 0.9 1.0 1.4 1.8 dB dB dB dB 45 40 35 28 dB dB dB dB Return Loss “On State” DC - 3.5 GHz DC - 4.0 GHz 18 13 dB dB Return Loss RF 1 -4 “Off State” 0.2 - 4.0 GHz 0.5 - 4.0 GHz 10 15 dB dB Input Power for 1 dB Compression 0.5 - 4.0 GHz 21 25 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.5 - 3.0 GHz 0.5 - 4.0 GHz 43 40 47 43 dBm dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 4.0 GHz 40 150 ns ns For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC244G16 v02.1105 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Insertion Loss Isolation 0 0 ISOLATION (dB) -1 + 25C - 40C + 85C -2 RF1 RF2 RF3 RF4 -20 -30 -40 TE INSERTION LOSS (dB) -10 -50 -60 -70 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 Return Loss 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 10 RFC RF1, RF2, RF3, RF4 ON RF1, RF2, RF3, RF4 OFF -15 -20 -25 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 B 0 SO -10 25 20 1 dB COMPRESSION 0.1 dB COMPRESSION 15 10 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 4 Bias Voltage & Current Input Third Order Intercept Point Vdd Range= +5.0 Vdc ±10% O 60 INPUT P1dB (dBm) 30 -5 INPUT IP3 (dBm) 0.5 0.1 and 1 dB Input Compression Point 0 RETURN LOSS (dB) 0 4 LE 0 SWITCHES - SMT -3 55 Vdd (Vdc) Idd (Typ) (mA) Idd (Max) (mA) 50 +5.0 3.0 7.0 45 TTL/CMOS Control Voltages 40 + 25C + 85C - 40C 35 30 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 State Bias Condition Low 0 to +0.8 Vdc @ 5 uA Typ. High +2.0 to +5.0 Vdc @ 70 uA Typ. 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 119 HMC244G16 v02.1105 Absolute Maximum Ratings Truth Table +7.0 Vdc Control Voltage Range (A & B) -0.5V to Vdd +1 Vdc Control Input Channel Temperature 150 °C Thermal Resistance (Insertion Loss Path) 210 °C/W Thermal Resistance (Terminated Path) 250 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Maximum Input Power Vdd = +5 Vdc +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 3.5 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Signal Path State A B RF COM to: Low Low RF1 High Low RF2 Low High RF3 High High RF4 TE Bias Voltage Range (Port Vdd) LE SWITCHES - SMT 10 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz O B SO Outline Drawing NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 10 - 120 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC244G16 v02.1105 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Pin Descriptions Description Interface Schematic 1, 3, 5, 10, 12, 13, 14, 16 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. 2, 4, 9, 11, 15 RF4, RF3, RF2, RF1, RFC These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 6 Vdd Supply Voltage +5.0 Vdc ±10% 7 B See truth table and control voltage table. 8 A LE 10 O B SO See truth table and control voltage table. SWITCHES - SMT Function TE Pin Number For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 121 HMC244G16 v02.1105 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz TE Evaluation PCB B SO SWITCHES - SMT LE 10 List of Materials for Evaluation PCB 104172 [1] Description O Item J1 - J5 PCB Mount SMA RF Connector J6 - J8 DC Pin C1 - C5 330 pF Capacitors, 0402 Pkg. U1 HMC244G16 SP4T Switch PCB [2] 103137 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 10 - 122 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC244G16 v02.1105 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz SWITCHES - SMT 10 O B SO LE TE Notes: For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 123