HMC272AMS8TR

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC272AMS8 / 272AMS8E v00.0511 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 1 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Typical Applications Features The HMC272AMS8 / HMC272AMS8E is ideal for: RoHS Compliant Product • Up or Down Converter for PCS Ultra Small Package: MSOP8 • W-CDMA LO / RF Isolation: 32 dB • 2.4 GHz ISM Input IP3: +20 dBm • MMDS General Description Functional Diagram The HMC272AMS8 & HMC272AMS8E are general purpose ultra miniature single balanced mixers in 8 lead plastic surface mount Mini Small Outline Packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of IF Frequency LO = +10 dBm IF = 100 MHz Parameter Min. Frequency Range, RF & LO Frequency Range, IF Typ. LO = +10 dBm IF = 400 MHz Max. Min. Typ. Units Max. 2-3 1.7 - 2.8 GHz DC - 0.8 DC - 0.8 GHz Conversion Loss 9 10.5 9 11 dB Noise Figure (SSB) 9 10.5 9 11 dB LO to RF Isolation 22 30 24 32 dB LO to IF Isolation 12 20 11 18 dB IP3 (Input) 17 21 16 20 dBm 1 dB Compression (Input) 8 11 7 10 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272AMS8 / 272AMS8E v00.0511 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Conversion Gain vs. Temperature @ LO = +10 dBm Isolation @ LO = +10 dBm 0 -10 -10 -15 IF = 400 MHz +25 C +85 C -40 C -20 10 -20 -30 -40 RF/IF LO/IF LO/RF -50 -60 -25 1 1.5 2 2.5 3 3.5 1 4 1.5 Conversion Gain vs. LO Drive -5 -5 RETURN LOSS (dB) 0 -10 +5 dBm +7 dBm +13 dBm +10 dBm +9 dBm -20 2.5 3 3.5 4 3.5 4 Return Loss @ LO = +10 dBm 0 -15 2 FREQUENCY (GHz) FREQUENCY (GHz) CONVERSION GAIN (dB) MIXERS - SINGLE & DOUBLE BALANCED - SMT -5 ISOLATION (dB) CONVERSION GAIN (dB) 0 -10 -15 RF LO -20 IF = 400 MHz -25 -25 1 1.5 2 2.5 3 3.5 4 1 1.5 FREQUENCY (GHz) 3 IF Bandwidth @ LO = +10 dBm vs. Conversion Gain & Return Loss 0 0 -5 -5 CONVERSION GAIN (dB) RETURN LOSS (dB) CONVERSION GAIN (dB) 2.5 FREQUENCY (GHz) Conversion Gain vs. IF Frequency -10 -15 100 MHz 400 MHz 800 MHz -20 2 -25 -10 -15 -20 IF Conversion Gain IF Return Loss -25 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 4 0 0.5 1 1.5 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC272AMS8 / 272AMS8E v02.0801 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Input IP3 vs. Temperature @ LO = +10 dBm Input IP3 vs. LO Drive 30 10 - 3 +7 dBm +10 dBm +13 dBm -40 C +25 C +85 C 25 IP3 (dBm) IP3 (dBm) 25 20 20 15 15 1 1.5 2 2.5 3 1 1.5 LO FREQUENCY (GHz) 2 2.5 3 LO FREQUENCY (GHz) P1dB vs. Temperature @ LO = +10 dBm Input IP2 vs. LO Drive 16 70 60 +25 C -40 C +85 C 14 P1dB (dBm) IP2 (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 30 50 40 10 +7 dBm +10 dBm +13 dBm 30 12 8 20 1 1.5 2 LO FREQUENCY (GHz) 2.5 3 1 1.5 2 2.5 3 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272AMS8 / 272AMS8E v00.0511 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz MxN Spurious Outputs Harmonics of LO nLO Spur at RF Port mRF 0 1 2 3 4 LO Frequency (GHz) 1 2 3 4 0 xx -11 -6 5 19 1.5 37 14 36 41 1 7 0 37 27 38 1.7 35 12 37 48 2 53 64 62 46 72 1.9 35 13 43 49 3 83 >85 >85 >85 >85 2.1 43 16 42 49 4 >85 >85 >85 >85 >85 2.3 36 19 37 49 2.5 29 23 36 50 RF = 2.6 GHz @ -10 dBm LO = 2.2 GHz @ +13 dBm All values in dBc relative to the IF LO = +10 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT nLO 10 - 4 HMC272AMS8 / 272AMS8E v00.0511 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Outline Drawing MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 5 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC272AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC272AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H272A XXXX H272A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC272AMS8 / 272AMS8E v00.0511 GaAs MMIC SMT SINGLE BALANCED MIXER, 1.7 - 3.0 GHz Evaluation Circuit Board List of Materials for Evaluation PCB 102781 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC272AMS8 / HMC272AMS8E Mixer PCB [2] 102643 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 6