HMC333ETR

HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Typical Applications Features The HMC333 / HMC333E is ideal for: Integrated LO Amplifier w/ Pdiss: < 25 mW • Wireless Local Loop Conversion Loss / Noise Figure: 8.5 dB Low LO Drive Level: 0 dBm Input IP3: +10 dBm Single Positive Supply: 3V to 5V TE Functional Diagram General Description LE The HMC333 & HMC333E are single balanced mixer ICs with integrated LO amplifiers. This converter IC can operate as an upconverter or downconverter between 3.0 GHz and 3.8 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 7 mA from a single positive +3V rail. The mixer has 8.5 dB of conversion loss, an input P1dB of 0 dBm and an input third order intercept point of +10 dBm at 3.5 GHz. B SO MIXERS - SGL-BAL - SMT 9 O Electrical Specifi cations, TA = +25° C IF = 100 MHz LO = 0 dBm & Vdd = +3V Parameter Min. Typ. Units Max. Frequency Range, RF & LO 3.0 - 3.8 GHz Frequency Range, IF DC - 1.0 GHz Conversion Loss 8.5 11 dB Noise Figure (SSB) 8.5 11 dB LO to RF Isolation 10 15 dB LO to IF Isolation 5 10 dB RF to IF Isolation 10 15 dB IP3 (Input) 3 10 dBm 1 dB Compression (Input) -3 +1 dBm 7 mA Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 9 - 194 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Isolation @ LO = 0 dBm 0 -5 -5 +25 C -40 C +85 C -15 -20 2.4 2.8 3.2 3.6 4 -20 2.4 4.4 4 4.4 LE 0 dBm +2 dBm +4 dBm -5 B SO CONVERSION GAIN (dB) -6 dBm -4 dBm -2 dBm 2.8 3.2 3.6 4 -10 -15 RF LO -20 -25 -30 4.4 0 1 FREQUENCY (GHz) 3 4 5 6 FREQUENCY (GHz) 0 -5 -5 RESPONSE (dB) 0 -10 +2.7V +3.0V +3.3V -15 2 IF Bandwidth @ LO = 0 dBm O Conversion Gain vs. Vdd @ LO = 0 dBm CONVERSION GAIN (dB) 3.6 0 -5 -20 2.4 3.2 Return Loss @ LO = 0 dBm 0 -20 2.4 2.8 FREQUENCY (GHz) Conversion Gain vs. LO Drive -15 9 -15 FREQUENCY (GHz) -10 -10 TE -10 RF/IF LO/RF LO/IF MIXERS - SGL-BAL - SMT ISOLATION (dB) 0 RETURN LOSS (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = 0 dBm -10 CONVERSION GAIN RETURN LOSS -15 -20 2.8 3.2 3.6 4 4.4 FREQUENCY (GHz) 0 0.2 0.4 0.6 0.8 1 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 195 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Upconverter Performance Conversion Gain @ LO = 0 dBm Input P1dB vs. Temperature @ LO = 0 dBm 10 6 INPUT P1dB (dBm) -5 2 -2 TE -10 -15 +25 C -40 C +85 C -6 -10 2.9 -20 3 3.2 3.4 3.6 3.8 4 3.1 3.3 3.5 3.7 3.9 3.8 4 FREQUENCY (GHz) LE FREQUENCY (GHz) Input IP3 vs. Temperature @ LO = 0 dBm* Input IP3 vs. LO Drive* 20 20 10 IP3 (dBm) 15 B SO 15 IP3 (dBm) MIXERS - SGL-BAL - SMT 9 CONVERSION GAIN (dB) 0 -2 dBm 0 dBm +2 dBm 5 0 3 3.2 3.4 3.6 3.8 10 +25 C -40 C +85 C 5 0 4 3 3.2 FREQUENCY (GHz) 3.6 Input P1dB vs. Vdd @ LO = 0 dBm O Input IP3 vs. Vdd @ LO = 0 dBm* 3.4 FREQUENCY (GHz) 10 20 6 INPUT P1dB (dBm) IP3 (dBm) 15 10 +2.7V +3.0V +3.3V 5 3.2 3.4 3.6 -2 +2.7V +3.0V +3.3V -6 0 3 2 3.8 4 FREQUENCY (GHz) -10 2.9 3.1 3.3 3.5 3.7 3.9 FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 9 - 196 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz MxN Spurious @ IF Port Harmonics of LO nLO Spur @ RF Port LO Freq. (GHz) 1 2 3 4 mRF 0 1 2 3 4 0 xx -9 -5 12 34 3 12 8 16 49 13 8 20 39 8 0 32 25 34 2 33 49 40 40 43 3.34 17 10 22 42 3 68 56 68 48 72 3.51 15 14 26 48 4 77 80 79 80 71 3.68 14 17 25 42 3.85 14 18 22 43 RF = 3.5 GHz @ -10 dBm LO = 3.4 GHz @ 0 dBm All values in dBc below IF power level. TE 1 3.17 O B SO LE LO = 0 dBm All values in dBc below input LO level @ RF port. 9 MIXERS - SGL-BAL - SMT nLO For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 197 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd 5.5V Continuous Pdiss (Ta = 85 °C) (derate 2.64 mW/°C above 85 °C) 238 mW IF DC Current ±3 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C LE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing B SO MIXERS - SGL-BAL - SMT 9 RF / IF Input (Vdd = +3V) TE Absolute Maximum Ratings NOTES: O 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC333 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC333E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H333 XXXX [2] 333E XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 9 - 198 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Pin Descriptions Description 1 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitors (10 pF & 10,000 pF) and an external inductor (1.8 nH) are required. 2, 5 GND Ground: Pin must connect to RF ground. 3 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or die nonfunction and possible die failure will result. 4 RF This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz. LE B SO LO This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz 9 O 6 Interface Schematic MIXERS - SGL-BAL - SMT Function TE Pin Number For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 199 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Application Circuit TE LE B SO O MIXERS - SGL-BAL - SMT 9 9 - 200 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz 9 MIXERS - SGL-BAL - SMT B SO LE TE Evaluation PCB O List of Materials for Evaluation PCB 105128 [1] Item Description J1 - J4 PCB Mount SMA RF Connector C1 10 pF Capacitor, 0603 Pkg. C2 .01 μF Capacitor, 0603 Pkg. L1 1.8 nH Inductor, 0805 Pkg. U1 HMC333 / HMC333E Mixer PCB [2] 103927 Evaluation Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 201