HMC346AMS8GETR

HMC346AMS8GE v03.1119 ATTENUATORS - SMT 8 GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz Typical Applications Features This attenuator is ideal for use as a VVA for DC - 8 GHz applications: Wide Bandwidth: DC - 8 GHz • Point-to-Point Radio 32 dB Attenuation Range Low Phase Shift vs. Attenuation • VSAT Radio General Description Functional Diagram The HMC346AMS8GE is absorptive Voltage Variable Attenuators (VVA) in 8 lead surface-mount packages operating from DC - 8 GHz. It features an on-chip reference attenuator for use with an external op-amp to provide simple single voltage attenuation control, 0 to -5V. The device is ideal in designs where an analog DC control signal must control RF signal levels over a 30 dB amplitude range. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-to-point and VSAT radios. Electrical Specifications, TA = +25° C, 50 Ohm system Parameter Typical Max Units 2.1 3.1 dB DC - 8 GHz Attenuation Range DC - 8 GHz 23 28 dB Return Loss DC - 8 GHz 5 10 dB tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 8 16 ns ns Input Power for 0.25 dB Compression (0.5 - 8 GHz) Min. Atten. Atten. >2 dB +8 +4 dBm dBm Input Third Order Intercept (0.5 - 8 GHz) (Two-tone Input Power = -8 dBm Each Tone) Min. Atten. Atten. >2 dB +30 +10 dBm dBm Switching Characteristics 8-1 Min Insertion Loss Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC346AMS8GE v03.1119 GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz ATTENUATION (dB) -1 -2 -3 -10 -20 -30 -4 -40 -5 0 1 2 3 4 5 6 7 8 9 0 10 1 2 3 4 FREQUENCY (GHz) +25 C +85 C 5 6 7 8 9 10 FREQUENCY (GHz) 5 dB 10dB 15 dB '-40 C 20 dB 25 dB 30dB Max Relative Attenuation vs. Control Voltage @ 4 GHz Return Loss vs. Attenuation 0 ATTENUATORS - SMT 0 0 INSERTION LOSS (dB) 8 Relative Attenuation Insertion Loss vs. Temperature 0 CONTROL VOLTAGE (Vdc) RETURN LOSS (dB) -5 -10 -15 -20 -25 -1 V2 -40C V2 +85C V2 +25C -2 -3 -4 V1 +85C V1 +25C V1 -40C -30 0 1 2 3 4 5 6 7 8 9 10 -5 FREQUENCY (GHz) Min 0 15 dB 10 15 20 25 30 RELATIVE ATTENUATION (dB) Relative Attenuation vs. Control Voltage @ 8 GHz Relative Phase 180 0 150 CONTROL VOLTAGE (Vdc) RELATIVE PHASE (deg) 5 Max 120 90 60 30 -1 V2 -40C V2 +85C -2 -3 -4 V1 +85C 0 0 1 2 3 4 5 6 7 8 9 20 dB 25 dB 30dB V1 +25C V1 -40C 10 -5 FREQUENCY (GHz) 5 dB 10dB 15 dB V2 +25C Max 0 5 10 15 20 25 30 RELATIVE ATTENUATION (dB) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 8-2 HMC346AMS8GE v03.1119 Input Third Order Intercept vs Attenuation* Input Second Order Intercept vs. Attenuation* SEECOND ORDER INTERCEPT POINT(dBm) 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 7 90 80 70 60 50 40 30 20 10 0 8 1 2 3 0 dB 3 dB 4 5 6 7 8 FREQUENCY (GHz) FREQUENCY (GHz) 0 dB 3 dB 6 dB 10 dB 0.25 dB Compression vs. Attenuation 6 dB 10 dB 1 dB Compression vs. Attenuation 20 20 15 15 INPUT P1 dB (dBm) INPUT 0.25 dB (dBm) ATTENUATORS - SMT 8 THIRD ORDER INTERCEPT POINT (dBm) GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz 10 5 0 10 5 0 0 1 2 3 4 5 6 7 8 0 1 2 3 FREQUENCY (Ghz) 4 5 6 7 8 FREQUENCY (Ghz) 0 dB 5 dB 0 dB 5 dB Second Harmonic vs. Attenuation SECOND HARMONIC (dBc) 90 80 70 60 50 40 30 20 10 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0 dB 3 dB 6 dB 10 dB *Two-tone input power = -8 dBm each tone, 1 MHz spacing. 8-3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC346AMS8GE v03.1119 GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz RF Input Power +18 dBm DC Voltage on I Pin +/- 0.8V Control Voltage Range +0.3 to -6 V Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Junction Temperature +175 °C Junction to Case Thermal Resistance 10 °C/W ESD Sensitivity Class 1 A State Bias Condition V1 -5 to 0V @ 9mA typical V2 -5 to 0V @ 9mA typical ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8-Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-1) Dimensions shown in millimeters 3.10 3.00 2.90 3.10 3.00 2.90 0.94 0.86 0.78 0.65 BSC 8 2.26 2.16 2.06 5 1 5.05 4.90 4.75 1.83 1.73 1.63 EXPOSED PAD 4 TOP VIEW BOTTOM VIEW 1.95 BSC 1.10 MAX SIDE VIEW 0.13 MAX COPLANARITY 0.10 0.25 GAGE PLANE PKG-003371 0.40 0.33 0.25 6° 0° END VIEW 0.70 0.55 0.40 0.23 0.08 0.95 REF 08-02-2019-B Outline Drawing ATTENUATORS - SMT 8 Absolute Maximum Ratings COMPLIANT TO JEDEC STANDARDS MO-187-AA-T 8-Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-1) Dimensions shown in millimeters Package Information Part Number Package Body Material Lead Finish MSL Rating HMC346AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [1] HMC346AMS8GETR RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [1] EV1HMC346AMS8G Eval Board Package Marking [2] H346A XXXX H346A XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 8-4 HMC346AMS8GE v03.1119 GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz ATTENUATORS - SMT 8 Pin Descriptions Pin Number Function Description Interface Schematic 1, 8 RF1 RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 2, 7 GND This pin must be DC grounded. 3, 6 V2, V1 Control Input (Master). 4 I Control Input (Slave). 5 N/C Not Connected. 600 Single-Line Control Driver 50 600 50 600 600 External op-amp control circuit maintains impedance match while attenuation is varied. Input control ranges from 0 Volts (min. attenuation) to -5 Volts (max. attenuation.) 8-5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC346AMS8GE v03.1119 GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz 8 ATTENUATORS - SMT Evaluation PCB List of Materials for Evaluation EV1HMC346AMS8G Item Description J1 - J2 PCB Mount SMA RF Connector J3 - J7 DC PIN U1 HMC346AMS8GE PCB [2] 104089 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should be 50 Ohm impedance and the package ground leads and package bottom should be connected directly to the PCB RF ground plane, similar to that shown above. The evaluation circuit board shown above is available from Analog Devices, upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 8-6