HMC3587LP3BE

HMC3587LP3BE v02.0717 Amplifiers - Linear & Power - SMT HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Typical Applications Features The HMC3587LP3BE is ideal for: High Output IP3: +25 dBm • Cellular / PCS / 3G Single Positive Supply: +5V • Fixed Wireless & WLAN Low Noise Figure: 3.5 dB [1] • CATV, Cable Modem & DBS 12 Lead 3x3 mm SMT Package: 9mm² • Microwave Radio & Test Equipment • IF & RF Applications Functional Diagram General Description The HMC3587LP3BE is a HBT Gain Block MMIC amplifier covering 4 GHz to 10 GHz and packaged in a 3x3 mm plastic QFN SMT package. This versatile amplifier can be used as a cascadable IF or RF gain stage in 50 Ohm applications. The HMC3587LP3BE delivers 14.5 dB gain, and +13 dBm output P1dB with only 3.5 dB noise figure. Electrical Specifications, TA = +25° C, Vcc = 5V, Vpd = 5V Parameter Min. Frequency Range Gain [1] Typ. Max. Min. 4-5 12.5 Typ. Max. 5 - 10 15 dB 0.012 dB / °C Input Return Loss 14 12 dB Output Return Loss 12 13 dB 13 dBm 25 dBm Output Power for 1 dB Compression (P1dB) 8 13 GHz 0.009 Gain Variation Over Temperature 14.5 Units 11 10.5 Output Third Order Intercept (IP3) (Pout = 0 dBm per tone, 1 MHz spacing) 23 Noise Figure [1] 4.5 6 3.5 6 dB Supply Current 1 (Icc) 43 60 43 60 mA Supply Current 2 (Ipd) 4 5 4 5 mA [1] Board loss subtracted out. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Gain & Return Loss Gain vs. Temperature 20 +25C +85C -40C 17 16 S21 S11 S22 0 GAIN (dB) RESPONSE (dB) 10 -10 15 14 13 12 -20 11 10 -30 2 4 6 8 10 12 14 4 5 Input Return Loss vs. Temperature 8 9 10 0 +25C +85C -40C +25C +85C -40C -5 RESPONSE (dB) -5 RETURN LOSS (dB) 7 Output Return Loss vs. Temperature 0 -10 -15 -20 -25 -10 -15 -20 -25 -30 -30 4 5 6 7 8 9 10 4 5 FREQUENCY (GHz) 6 7 8 9 10 9 10 FREQUENCY (GHz) Noise Figure vs. Temperature P1dB vs. Temperature 10 20 9 18 8 +25C +85C -40C 7 +25C +85C -40C 16 P1dB (dBm) NOISE FIGURE (dB) 6 FREQUENCY (GHz) FREQUENCY (GHz) Amplifiers - Linear & Power - SMT 18 6 5 4 3 14 12 10 8 2 6 1 0 4 4 5 6 7 8 FREQUENCY (GHz) 9 10 4 5 6 7 8 FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2 HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Output IP3 vs. Temperature Psat vs. Temperature 35 18 IP3 (dBm) Psat (dBm) 14 12 +25C +85C -40C 10 25 20 15 8 6 10 4 5 6 7 8 9 10 4 5 6 FREQUENCY (GHz) Phase Noise @ Pin=0 dBm 8 9 10 Power Compression @ 5 GHz -100 20 Pout (dBm), GAIN (dB), PAE (%) -110 -120 5 GHz 7 GHz -130 -140 -150 -160 -170 -180 10 10 2 10 3 10 4 10 5 10 6 10 7 10 15 Pout Gain PAE 10 5 0 -5 -20 8 -15 OFFSET(Hz) -5 0 5 Power Compression @ 9 GHz Pout (dBm), GAIN (dB), PAE (%) 20 15 Pout Gain PAE 10 5 0 -5 -20 -10 INPUT POWER (dBm) 20 Pout (dBm), GAIN (dB), PAE (%) 7 FREQUENCY (GHz) Power Compression @ 7 GHz -17 -14 -11 -8 -5 -2 INPUT POWER (dBm) 3 +25C +85C -40C 30 16 PHASE NOISE (dBc/Hz) Amplifiers - Linear & Power - SMT 20 1 4 7 15 Pout Gain PAE 10 5 0 -5 -20 -17 -14 -11 -8 -5 -2 1 4 7 INPUT POWER (dBm) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Reverse Isolation ISOLATION (dB) -10 +25C +85C -40C -20 -30 -40 -50 -60 -70 4 5 6 7 8 9 10 FREQUENCY (GHz) Absolute Maximum Ratings Drain Bias Voltage 6 Vdc RF Input Power (RFIN) +12 dBm Channel Temperature 150 °C Continuous Pdiss (T=85 °C) (derate 7.87 mW/ °C Above +85 °C) 512 mW Thermal Resistance (channel to ground paddle) 127 °C/W Storage Temperature -65 to 150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Amplifiers - Linear & Power - SMT 0 4 HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz 12-Lead Lead Frame Chip Scale Package [LFCSP] 3 x 3 mm Body and 0.85 mm Package Height (CP-12-10) Dimensions shown in millimeters 0.28 0.23 0.18 PIN 1 INDICATOR 0.43 × 0.43 10 0.50 BSC 12 9 1 1.25 1.15 SQ 1.05 EXPOSED PAD 7 TOP VIEW 0.90 0.85 0.80 0.60 0.55 0.50 3 4 6 BOTTOM VIEW 1.00 REF 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.203 REF SEATING PLANE FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 05-19-2017-A 3.10 3.00 SQ 2.90 PIN 1 INDICATOR PKG-004927 Amplifiers - Linear & Power - SMT Outline Drawing 12-Lead Lead Frame Chip Scale Package [LFCSP] 3 mm × 3 mm Body and 0.85 mm Package Height (CP-12-10) Dimensions shown in millimeters Package Information Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] HMC3587LP3BE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H3587 XXXX HMC3587LP3BETR RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H3587 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Pin Descriptions Function Description 1, 3, 4, 5, 6, 7, 9, 11 NC No connection nenscessary. These pins may be connected to RF/DC ground. Performance will not be affected. 2 RFIN This pin is AC coupled and matched to 50 Ohms. 8 RFOUT This pin is AC coupled and matched to 50 Ohms. 10 Vcc Power supply voltage for the amplifier 12 Vpd Power Control Pin for proper control bias GND Paddle GND Ground Paddle must be connected to RF/DC ground. Interface Schematic For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Amplifiers - Linear & Power - SMT Pid Number 6 HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Amplifiers - Linear & Power - SMT Evaluation PCB List of Material for Evaluation PCB 113589-HMC3587LP3B Item Description J1, J4 PCB Mount SMA RF Connector C1 - C2 10 pF Capacitor, 0402 Pkg. C3 - C4 10000 pF Capacitor, 0603 Pkg. C5 -C6 4.7 uF Capacitor, Tantalum. U1 HMC3587LP3BE PCB [2] 111173-1 Evaluation Board 1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 7 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC3587LP3BE v02.0717 HBT GAIN BLOCK MMIC AMPLIFIER, 4 - 10 GHz Amplifiers - Linear & Power - SMT Application Circuit For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 8