HMC361G8TR

HMC361G8 v00.1111 Frequency Dividers & Detectors - SMT SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz Typical Applications Features Prescaler for 10 MHz to 13 GHz PLL Applications: Ultra Low SSB Phase Noise: -148 dBc/Hz • Point-to-Point / Multi-Point Radios Wide Bandwidth • VSAT Radios Output Power: 3 dBm • Fiber Optic Single DC Supply: +5V • Test Equipment 8 Lead Hermetic SMT Package • Space & Military Functional Diagram General Description The HMC361G8 is a low noise N = 2 static divider in an 8 lead glass/metal surface mount (hermetic) package. This device operates from 10 MHz (with a square wave input) to 13 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -148 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V Conditions Min. Maximum Input Frequency Parameter Sine Wave or Square Wave input 13 Minimum Input Frequency Sine Wave or Square Wave Input. {1} Minimum Input Frequency Input Power Range Output Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Typ. Max. Units 0.20 GHz GHz 0.01 GHz Fin = 0.01 to 0.20 GHz (square wave) Square Wave {1} {2} -10 10 dBm Fin = 0.20 to 0.5 GHz (sine) 0 10 dBm Fin = 0.5 to 1 GHz (sine) -10 10 dBm Fin = 1 to 8 GHz (sine) -15 10 dBm Fin = 8 to 11 GHz (sine) -15 2 Fin = 8 - 13 GHz (sine) -15 0 dBm Fin = 0.20 GHz 4.5 dBm Fin = 6 GHz 3.6 dBm Fin = 9 GHz 1.6 dBm dBm Fin = 13 GHz -2.5 Both RF Outputs Terminated 40 dB Pin = 0 dBm, Fin = 6 GHz (sine) -148 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 84 mA Supply Current (Icc) (Vcc = +5V) 1. Divider will operate down to 0.01 GHz with a square-wave input signal. 2. Square wave input waveform is recommended for operation below 200 MHz. Recommended transitions times are < 100 ps. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC361G8 v00.1111 SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz 15 10 10 5 5 0 Min Pin +25C Max Pin +25C -5 -10 -15 -20 -10 -15 -25 0 2 4 6 8 10 INPUT FREQUENCY (GHz) 12 14 0 2 4 6 8 10 INPUT FREQUENCY (GHz) 12 14 SSB Phase Noise Performance vs. Temperature, Pin= 0 dBm, Fin = 6 GHz Output Power vs. Temperature 6 -110 4 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -40C Max Pin -40C -20 -25 2 0 -2 + 25C + 85C - 40C -4 -6 0 2 4 6 8 10 INPUT FREQUENCY (GHz) 12 -130 -140 -150 3 4 10 5 10 6 10 10 7 10 8 10 OFFSET FREQUENCY (Hz) Reverse Leakage, Pin= 0 dBm, T= 25 °C 0 -10 -10 POWER LEVEL (dBm) 0 -20 -30 -40 Pin_FEEDTHRU 3rd HARMONIC -50 +25C +85C -40C -120 -160 2 10 14 Output Harmonic Content, Pin= 0 dBm, T= 25 °C OUTPUT LEVEL (dBm) 0 -5 Frequency Dividers & Detectors - SMT Input Sensitivity Window vs. Temperature 15 INPUT POWER (dBm) INPUT POWER (dBm) Input Sensitivity Window, T= 25 °C Both Output Ports Terminated One Output Port Terminated -20 -30 -40 -50 -60 -60 0 2 4 6 8 10 INPUT FREQUENCY (GHz) 12 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 INPUT FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC361G8 v00.1111 SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 °C Absolute Maximum Ratings 400 AMPLITUDE (mV) Frequency Dividers & Detectors - SMT 600 200 RF Input (Vcc = +5V) +13 dBm Vcc +5.5V Storage Temperature -65 to +150 °C ESD Sensitivity (HBM) 100V 0 Reliability Information -200 -400 Junction Temperature to Maintain 1 Million Hour MTTF 135 °C -600 22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7 Nominal Junction Temperature (T = 85 °C and Pin = + 10 dBm) 126 °C Thermal Resistance (Rth) (Junction to GND Paddle, 5V Supply) 96.9 °C/W Operating Temperature -40 to +85 °C TIME (ns) Typical Supply Current vs. Vcc, T= 25 °C Vcc (V) Icc (mA) 4.75 76 5.0 84 5.25 90 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Note: Divider will operate over full voltage range shown above Outline Drawing NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 50 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC361G8 v00.1111 SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz Pin Description Function Description 1 IN RF Input, must be DC blocked. 2, 6 N/C These pins are not connected internally; however, all data shown herein was measured with the pins connected to RF/DC ground. 3 NIN RF Input 180° out of phase with pin 1 for differential operation. Must be DC blocked. AC ground for single ended operation. 4 GND Pin and exposed paddle must be connected to RF/DC ground. 5 NOUT Divided output 180° out of phase with pin 7, must be DC blocked. 7 OUT Divided Output, must be DC blocked. 8 Vcc Supply voltage 5V ± 0.25V. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Frequency Dividers & Detectors - SMT Pin Number 4 HMC361G8 v00.1111 SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz Frequency Dividers & Detectors - SMT Evaluation PCB List of Materials for Evaluation PCB EVAL01-HMC361G8 Item Description J1 - J3 Connector, SMA, Female J4, J5 DC Pins C1 - C4 ATC530L, Broadband Capacitor, 0402 Pkg. C5 1000 pF Capacitor, 0603 Pkg. C6 10 uF Tantalum Capacitor, 1206 Pkg. U1 HMC361G8 PCB [2] 106580 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 5 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC361G8 v00.1111 SMT GaAs HBT MMIC DIVIDE-BY-2, 0.01 - 13 GHz Capacitors C1, C2, C3, and C4 are broadband multilayer capacitors, American Technical Ceramics part number ATC530L. The 100 nF capacitance value is per ATC datasheet. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Frequency Dividers & Detectors - SMT Application Circuit 6