HMC363S8G / 363S8GE
v07.0421
Frequency Dividers & Detectors - SMT
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Typical Applications
Features
Prescaler for DC to X Band PLL Applications:
Ultra Low SSB Phase Noise: -153 dBc/Hz
• Satellite Communication Systems
Wide Bandwidth
• Fiber Optic
Output Power: -6 dBm
• Point-to-Point and Point-to-Multi-Point Radios
Single DC Supply: +5V
• VSAT
S8G SMT Package
Functional Diagram
General Description
The HMC363S8G & HMC363S8GE are low noise
Divide-by-8 Static Dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages. This device operates from DC (with a square
wave input) to 12 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise of
-153 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Min.
Typ.
12
13
0.2
0.5
GHz
Fin = 1 to 7 GHz
-15
>-20
+10
dBm
Fin = 7 to 11 GHz
-10
>-15
+2
dBm
Fin = 11 to 12 GHz
-5
>-8
0
dBm
Fin = 12 GHz
-9
-6
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Output Power
Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time
Sine Wave Input. [1]
Max.
Units
GHz
dBm
Both RF Outputs Terminated
65
dB
Pin = 0 dBm, Fin = 6 GHz
-153
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
70
mA
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC363S8G / 363S8GE
v07.0421
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
20
10
10
0
Recommended
Operating Window
-10
-20
-30
0
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
-10
-20
-30
0
3
6
9
12
15
0
3
6
INPUT FREQUENCY (GHz)
0
15
0
-20
+25 C
+85 C
-40 C
-2
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
12
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
-4
-6
-8
-10
0
3
6
9
12
-40
-60
-80
-100
-120
-140
-160
2
10
15
3
10
4
10
5
10
6
10
7
10
OFFSET FREQUENCY (Hz)
INPUT FREQUENCY (GHz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
Both Output Ports Terminated
One Output Port Terminated
POWER LEVEL (dBm)
-10
OUTPUT LEVEL (dBm)
9
INPUT FREQUENCY (GHz)
-20
-30
-40
Pfeedthru
2nd Harmonic
3rd Harmonic
-50
-60
Frequency Dividers & Detectors - SMT
Input Sensitivity Window vs. Temperature
20
INPUT POWER (dBm)
INPUT POWER (dBm)
Input Sensitivity Window, T= 25 °C
-20
-40
-60
-80
0
3
6
9
INPUT FREQUENCY (GHz)
12
15
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
2
HMC363S8G / 363S8GE
v07.0421
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
3
200
AMPLITUDE (mV)
Frequency Dividers & Detectors - SMT
300
100
0
-100
-200
-300
22.7
23.1
23.5
23.9
24.3
24.7
TIME (nS)
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
RF Input (Vcc = +5V)
+13 dBm
Vcc (V)
Icc (mA)
Vcc
+5.5V
4.75
64
Channel Temperature
135 °C
5.0
70
Continuous Pdiss (T=85°C)
(derate 13.7 mW/°C above 85°C)
680 mW
5.25
75
Thermal Resistance
(channel to ground paddle)
73.2 C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note: Divider will operate over full voltage range shown above
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC363S8G / 363S8GE
v07.0421
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
4.98
4.90
4.80
8
3.99
3.90
3.81
5
1
1.27
BSC
1.72
1.52
0.53 REF
6.20
6.00
5.80
4
2.50
2.29
2.00
BOTTOM VIEW
3.81 REF
0.50
0.25
1.57
1.37
0.13
0.00
COPLANARITY
0.10
0.46
0.36
PKG-006220
EXPOSED
PAD
TOP VIEW
SIDE VIEW
SEATING
PLANE
3.50
3.30
3.00
8°
0°
45°
END VIEW
1.04 REF
0.25
0.19
1.27
0.41
03-31-2021-A
Outline Drawing
COMPLIANT TO JEDEC STANDARDS MS-012-BA
8-Lead Standard Small Outline Package, with Exposed Pad [SOIC_N_EP]
Narrow Body, Low Stand-off
(RD-8-3)
Dimensions shown in millimeters.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC363S8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC363S8GTR
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC363S8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
HMC363S8GETR
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
104631HMC363S8G
Eval Board
Package Marking [3]
HMC363
XXXX
HMC363
XXXX
HMC363
XXXX
HMC363
XXXX
Frequency Dividers & Detectors - SMT
8-Lead Standard Small Outline Package, with Exposed Pad [SOIC_N_EP]
Narrow Body, Low Stand-off
(RD-8-3)
Dimensions shown in millimeters.
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
4
HMC363S8G / 363S8GE
v07.0421
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Frequency Dividers & Detectors - SMT
Pin Description
5
Pin Number
Function
Description
1
NOUT
Divided output 180° out of phase with pin 3.
2, 6
N/C
No connection. These pins must not be grounded.
3
OUT
Divided Output.
4
VCC
Supply voltage 5V ± 0.25V.
5
IN
RF Input must be DC blocked.
7
NIN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8, paddle
GND
Backside of package has exposed metal ground slug which
must be connected to ground.
Interface Schematic
Application Circuit
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC363S8G / 363S8GE
v07.0421
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
List of Materials for Evaluation PCB 104631
Item
Description
J1 - J3
PCB Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 µF Tantalum Capacitor
U1
HMC363S8G / HMC363S8GE Divide-by-8
PCB [2]
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground slug should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Analog Devices upon request. This evaluation
board is designed for single ended input testing. J2
and J3 provide differential output signals.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Frequency Dividers & Detectors - SMT
Evaluation PCB
6
