HMC368LP4E

HMC368LP4 / 368LP4E v03.0705 FREQ. MULTIPLIERS - ACTIVE - SMT 7 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Typical Applications Features • Microwave Radios & VSAT Output Power: +15 dBm • Fiber Optic Infrastructure Wide Input Power Range: 0 to +10 dBm • Military Communications & Radar 100 kHz SSB Phase Noise: -140 dBc/Hz +5V @ 75 mA Supply 16 mm2 Leadless QFN SMT Package Functional Diagram General Description The HMC368LP4 & HMC368LP4E are miniature amp-doubler-amps utilizing GaAs PHEMT technology in 4 x 4 mm leadless surface mount packages. When driven by a +2 dBm signal, the multiplier provides +15 dBm typical output power from 9 to 16 GHz. The Fo and the 3Fo isolations are 18 dB typical. The low additive SSB phase noise of -140 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC368LP4(E) is ideal for use in LO multiplier chains allowing reduced parts count vs. traditional approaches. Electrical Specifi cations, TA = +25° C, Vd1 = Vd2 = +5.0 Vdc, +2 dBm Drive Level Parameter Min. Frequency Range, Input Typ. 4.5 - 8.0 Frequency Range, Output Output Power 12 Fo Isolation (with respect to output level) Max. Units GHz 9.0 - 16.0 GHz 15 dBm 18 dB 3Fo Isolation (with respect to output level) 18 dB Input Return Loss 10 dB Output Return Loss SSB Phase Noise (Fout = 13 GHz, 100 kHz Offset) Supply Current (Idd)* Pin = +2 dBm 10 dB -140 dBc/Hz 75 mA *Adjust Vg1, Vg2 between -2V to 0V to achieve Idd = 75 mA typical 7 - 34 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC368LP4 / 368LP4E SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Output Power vs. Drive Level 20 20 18 18 16 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) Output Power vs. Temperature @ +2 dBm Drive Level 14 12 10 8 6 +25C +85C -40C 4 2 7 14 12 10 8 0 dBm +2 dBm +5 dBm +10 dBm 6 4 2 0 0 8 9 10 11 12 13 14 15 16 17 8 9 10 OUTPUT FREQUENCY (GHz) 11 12 13 14 15 16 17 16 17 OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ +2 dBm Drive Level Isolation @ +2 dBm Drive Level 20 20 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 18 14 12 10 8 6 4.5V 5.0V 5.5V 4 10 0 -10 Fo 2Fo 3Fo -20 2 -30 0 8 9 10 11 12 13 14 15 16 8 17 9 10 12 13 14 15 Output Return Loss vs. Temperature Input Return Loss vs. Temperature 0 0 OUTPUT RETURN LOSS (dB) +25 C +85 C -40 C -5 RETURN LOSS (dB) 11 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) FREQ. MULTIPLIERS - ACTIVE - SMT v03.0705 -10 -15 -20 -25 -5 -10 -15 -20 +25 C +85 C -40 C -25 -30 -30 4 5 6 7 8 9 FREQUENCY (GHz) 8 9 10 11 12 13 14 15 16 17 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 7 - 35 HMC368LP4 / 368LP4E v03.0705 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Output Spectrum @ Fin = 6.5 GHz, Pin = +2 dBm 7 - 36 20 25 15 15 OUTPUT POWER (dBm) OUTPUT POWER (dB) 5 -5 -15 -25 -35 10 5 9GHz 12GHz 16GHz 0 -5 -45 -55 -10 4 8 12 16 20 24 -5 28 -2 1 FREQUENCY (GHz) 4 7 10 INPUT POWER (dBm) SSB Phase Noise Performance, Fout = 13 GHz, Input Power = +2 dBm 0 SSB PHASE NOISE (dBc/Hz) FREQ. MULTIPLIERS - ACTIVE - SMT 7 Output Power vs. Input Power @ Three Frequencies -30 -60 -90 -120 -150 -180 2 10 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC368LP4 / 368LP4E SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Absolute Maximum Ratings RF Input (Vdd = +5V) +20 dBm Supply Voltage, Vd1, Vd2 +6.0V Typical Supply Current vs. Vdd Vdd (V) Idd (mA) 4.5 73 Gate Bias Voltage (Vg1, Vg2) -4 to 0 Vdc 5.0 75 Channel Temperature 150 °C 5.5 77 Continuous Pdiss (T = 85 °C) (derate 12.5 mW/°C above 85 °C) 812 mW Thermal Resistance (junction to ground paddle) 80 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Note: Amp-Doubler-Amp will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 7 FREQ. MULTIPLIERS - ACTIVE - SMT v03.0705 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC368LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC368LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H368 XXXX [2] H368 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 7 - 37 HMC368LP4 / 368LP4E v03.0705 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Pin Description FREQ. MULTIPLIERS - ACTIVE - SMT 7 7 - 38 Pin Number Function Description 1, 5-14, 18, 19, 24 N/C No Connection. These pins may be connected to RF ground. Performance will not be affected. 3 RFIN Multiplier Input. AC Coupled. No external DC blocks required. 2, 4, 15, 17 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 16 RFOUT Multiplied Output. AC coupled. No external DC blocks necessary. 20, 22 Vd2, Vd1 Drain supply voltage 5V ± 0.5V. 21, 23 Vg2, Vg1 Gate supply voltages. Adjust between -2 Vdc to 0 Vdc to achieve 75 mA drain current. Interface Schematic For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC368LP4 / 368LP4E v03.0705 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT Evaluation PCB FREQ. MULTIPLIERS - ACTIVE - SMT 7 List of Materials for Evaluation PCB 107846 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J7 DC Pin C1 - C4 100 pF capacitor, 0402 Pkg. C5 - C8 2.2 μF capacitor, case size A U1 HMC368LP4 / HMC368LP4E Amp-x2-Amp PCB [2] 107844 PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 7 - 39