HMC382LP3 / 382LP3E
v02.0320
AMPLIFIERS -LOW NOISE -SMT
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
Typical Applications
Features
The HMC382LP3 / HMC382LP3E is ideal for:
Noise Figure: 1 dB
• Cellular/3G Infrastructure
Output IP3: +30 dBm
• Base Stations & Repeaters
Gain: 17 dB
• CDMA, W-CDMA, & TD-SCDMA
Externally Adjustable Supply Current
• GSM/GPRS & EDGE
Single Positive Supply: +5V
50 Ohm Matched Input/Output
Functional Diagram
General Description
The HMC382LP3 & HMC382LP3E high dynamic
range GaAs PHEMT MMIC Low Noise Amplifiers are
ideal for GSM & CDMA cellular basestation front-end
receivers operating between 1.7 and 2.2 GHz. This
LNA has been optimized to provide 1.0 dB noise figure,
17 dB gain and +30 dBm output IP3 from a single
supply of +5V. The HMC382LP3 & HMC382LP3E
feature an externally adjustable supply current which
allows the designer to tailor the linearity performance
of the LNA for each application. For applications
which require improved noise fi gure, please see the
HMC618LP3(E).
Electrical Specifi cations, TA = +25° C, Vdd1, Vdd2 = +5V, Rbias = 16 Ohms*
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
1.7 - 1.9
14
Typ.
Max.
Min.
1.9 - 2.0
17
12
Typ.
Max.
Min.
2.0 - 2.1
15
11
Typ.
Max.
2.1 - 2.2
14
9
Units
GHz
12
dB
Gain Variation Over Temperature
0.01
0.015
0.01
0.015
0.01
0.015
0.01
0.015
dB/°C
Noise Figure
1.0
1.3
1.05
1.35
1.15
1.45
1.2
1.5
dB
Input Return Loss
13
12
11
10
dB
Output Return Loss
10
13
12
9
dB
Reverse Isolation
37
36
35
35
dB
Output Power for
1dB Compression (P1dB)
16
16
15.5
14
dBm
29.5
30
30
29.5
dBm
67
67
67
67
mA
Output Third Order Intercept (IP3)
(-20 dBm Input Power per tone,
1 MHz tone spacing)
Supply Current (Idd)
* Rbias resistor value sets current. See application circuit herein.
1
Information
furnished
by Analog
is believed
to be
accurate
and reliable.
However,
For price,Way,
delivery,
placeNorwood,
orders: Analog
Devices, Inc.,
For price,
delivery,
andDevices
to place
orders:
Analog
Devices,
Inc.,
One no
Technology
P.O.and
Boxto9106,
MA 02062-9106
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One
Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700
• Order
at www.analog.com
rights of third parties that may result from its use. Specifications
subject to change without
notice.online
No
Phone:
781-329-4700
•
Order
online
at
www.analog.com
license is granted by implication or otherwise under any patent
or patent rights
of Analog
Devices. 1-800-ANALOG-D
Application
Support:
Phone:
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
+25 C
+85 C
-40 C
20
10
S21
S11
S22
5
GAIN (dB)
RESPONSE (dB)
15
0
16
-5
12
-10
-15
8
-20
0.5
0.75
1
1.25
1.5 1.75
2
2.25
FREQUENCY (GHz)
2.5
2.75
1.6
3
Input Return Loss vs. Temperature
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
0
-3
+25 C
+85 C
-40 C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
1.8
Output Return Loss vs. Temperature
0
-10
-15
+25 C
+85 C
-40 C
-6
-9
-12
-20
1.6
1.7
AMPLIFIERS -LOW NOISE -SMT
24
25
-15
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
Reverse Isolation vs. Temperature
1.6
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
2.2
2.3
Noise Figure vs. Temperature
2
-15
-20
NOISE FIGURE (dB)
ISOLATION (dB)
1.6
-25
+25 C
+85 C
-40 C
-30
-35
-40
1.2
0.8
+25 C
+85 C
-40 C
0.4
-45
0
-50
1.6
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
1.6
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
2
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
20
18
18
Psat (dBm)
P1dB (dBm)
Psat vs. Temperature @ Idd = 67 mA
20
16
14
+25 C
+85 C
-40 C
12
10
1.8
1.9
2
FREQUENCY (GHz)
2.1
2.2
Output IP3 vs. Temperature Idd = @ 67 mA
1.7
32
22
GAIN (dB) & P1dB (dBm)
24
28
26
+25 C
+85 C
-40 C
24
1.8
1.9
2
FREQUENCY (GHz)
2.1
2.2
Gain, Noise Figure & P1dB vs.
Supply Current @ 1900 MHz
34
30
IP3 (dBm)
+25 C
+85 C
-40 C
14
12
10
1.7
16
1.4
Noise Figure
1.2
20
1
18
0.8
16
0.6
0.4
GAIN
P1dB
14
NOISE FIGURE (dB)
AMPLIFIERS -LOW NOISE -SMT
P1dB vs. Temperature @ Idd = 67 mA
22
12
60
20
1.7
3
1.8
1.9
2
FREQUENCY (GHz)
2.1
2.2
0.2
70
80
90
100
110
120
SUPPLY CURRENT (mA)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
Typical Supply Current vs. Vdd
Drain Bias Voltage (Vdd1, Vdd2)
+8.0 Vdc
Vdd (Vdc)
Idd (mA)
RF Input Power (RFIN)(Vs = +5.0 Vdc)
+10 dBm
+4.5
67.2
Channel Temperature
150 °C
+5.0
67.2
+5.5
67.2
Continuous Pdiss (T = 85 °C)
(derate 6.94 mW/°C above 85 °C)
0.451 W
Thermal Resistance
(channel to ground paddle)
144 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Recommended Bias Resistor Values
for Various Idd1 & Idd2
Idd1 + Idd2 (mA)
Rbias (Ohms)
60
27
70
16
80
13
100
8.2
120
3.9
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS -LOW NOISE -SMT
Absolute Maximum Ratings
4
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
16-Lead Lead Frame Chip Scale Package [LFCSP]
3 x 3 mm Body and 0.90 mm Package Height
(CP-16-54)
Dimensions shown in millimeters
Outline Drawing
DETAIL A
PIN 1
INDICATOR
0.28
0.23
0.18
0.50
BSC
PIN 1 (C 0.30 x 0.30)
INDICATOR AREA OPTIONS
16
13
(SEE DETAIL A)
1
12
1.70
1.60 SQ
1.50
EXPOSED
PAD
4
9
TOP VIEW
1.00
0.90
0.80
0.50
0.40
0.30
8
5
0.20 MIN
BOTTOM VIEW
SEATING
PLANE
05-16-2017-A
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
PKG-005129
AMPLIFIERS -LOW NOISE -SMT
(JEDEC 95)
3.10
3.00 SQ
2.90
COMPLIANT WITH JEDEC STANDARDS MO-220-VEED-6.
16-Lead Lead Frame Chip Scale Package [LFCSP]
3 mm × 3 mm and 0.90 mm Package Height
(CP-16-54)
Dimensions shown in millimeters
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating [1]
Package Marking [2]
HMC382LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
382
XXXX
HMC382LP3ETR
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
382
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
Pin Descriptions
Function
Description
1, 4, 5, 7, 9,
12, 14, 16
N/C
No connection necessary. These pins may be connected to
RF/DC ground. Performance will not be affected.
2
RFIN
This pin is AC coupled and matched to 50 Ohms.
8
Res
This pin is used to set the DC current of the amplifi er
by selection of external bias resistor.
See application circuit.
11
RFOUT
This pin is AC coupled and matched to 50 Ohms.
13,15
Vdd2, Vdd1
Power supply voltage. Choke inductor and bypass
capacitors are required. See application circuit.
3, 6, 10
GND
These pins and package bottom must
be connected to RF/DC ground.
Interface Schematic
AMPLIFIERS -LOW NOISE -SMT
Pin Number
Application Circuit
Note: L1, L2, L3 and C1 should be located as close to pins as possible.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
6
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
AMPLIFIERS -LOW NOISE -SMT
Evaluation PCB
List of Materials for Evaluation PCB 112582
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J5
DC Pin
C1
10 pF Capacitor, 0402 Pkg.
C2, C3
1000 pF Capacitor, 0603 Pkg.
C4, C5
15000 pF Capacitor, 0603 Pkg
L1
56nH Inductor, 0603 Pkg.
L2
18nH Inductor, 0603 Pkg.
R1
Resistor, 0402 Pkg..
U1
HMC382LP3 / HMC382LP3E Amplifier
PCB [2]
112580 Evaluation PCB
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Analog Devices upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC382LP3 / 382LP3E
v02.0320
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
AMPLIFIERS -LOW NOISE -SMT
Notes
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
8
