HMC398QS16G

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC398* Product Page Quick Links Last Content Update: 11/01/2016 Comparable Parts Design Resources View a parametric search of comparable parts • HMC398QS16G Evaluation Board • • • • Documentation Discussions Data Sheet • HMC398 Data Sheet View all HMC398 EngineerZone Discussions Evaluation Kits HMC398 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints Sample and Buy Reference Materials Quality Documentation • HMC Legacy PCN: QS##, QS##E and QS##G,QS##GE packages - Relocation of pre-existing production equipment to new building • Package/Assembly Qualification Test Report: Plastic Encapsulated QSOP (QTR: 02015 REV: 11) • Semiconductor Qualification Test Report: GaAs HBT-A (QTR: 2013-00228) Technical Articles • Low Cost Plastic MMIC VCOs Visit the product page to see pricing options Technical Support Submit a technical question or find your regional support number * This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to the content on this page does not constitute a change to the revision number of the product data sheet. This content may be frequently modified. THIS PAGE INTENTIONALLY LEFT BLANK HMC398QS16G / 398QS16GE v03.0810 VCOs - SMT Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz Typical Applications Features Low noise MMIC VCO w/Divide-by-8 for Ku-Band applications such as: Pout: +7 dBm • Point-to-Point Radios No External Resonator Needed • Point-to-Multi-Point Radios / LMDS Single Supply: 5V @ 325 mA • VSAT QSOP16G SMT Package Functional Diagram General Description Phase Noise: -105 dBc/Hz @100 kHz Typ. The HMC398QS16G & HMC398QS16GE are single chip GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC398QS16G & HMC398QS16GE integrate resonators, negative resistance devices, varactor diodes and divide-by-8 prescalers. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +7 dBm typical from a 5V supply voltage. The voltage controlled oscillator is packaged in a low cost, surface mount 16 leaded QSOP package with an exposed base for improved RF and thermal performance. The HMC398QS16G & HMC398QS16GE require no external components Electrical Specifications, TA = +25° C, Vcc1, Vcc2 = +5.0V Parameter Min. Frequency Range Power Output RF Output Divided Output +3 -9 SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output Tune Voltage Supply Current Vtune Icc 1 (Digital) Icc 2 (RF) Typ. +7 -6 dBm dBm -105 dBc/Hz 1.0 10.0 65 260 Pulling (into a 2.0:1 VSWR) 1 1/2 3/2 2nd 5/2 V mA mA 10 Output Return Loss Units GHz Tune Port Leakage Current (Vtune= 10V) Harmonics/Subharmonics Max. 14.0 - 15.0 µA 2 dB -20 -30 -12 -40 dBc dBc dBc dBc 4 MHz pp Pushing @ Vtune= 5V 30 MHz/V Frequency Drift Rate 1.5 MHz/°C For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC398QS16G / 398QS16GE v03.0810 Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz 15.4 15.2 15.2 15 14.8 14.6 14.4 Vcc= 4.75V Vcc= 5.0V Vcc= 5.25V 14.2 14 13.8 VCOs - SMT Frequency vs. Tuning Voltage, Vcc= +5V 15.4 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25°C 15 14.8 14.6 14.4 +25 C +85 C -40 C 14.2 14 13.8 1 2 3 4 5 6 7 8 9 10 1 2 3 4 TUNING VOLTAGE (VOLTS) 5 6 7 8 9 10 8 9 10 TUNING VOLTAGE (VOLTS) Sensitivity vs. Tuning Voltage, Vcc= +5V Output Power vs. Tuning Voltage, Vcc= +5V 15 400 300 OUTPUT POWER (dBm) SENSITIVITY (MHz/VOLT) 350 +25 C +85 C -40 C 250 200 150 100 12 9 6 +25 C +85 C -40 C 3 50 0 0 1 2 3 4 5 6 7 8 9 1 10 2 3 4 5 6 7 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage SSB Phase Noise @ Vtune= 5V 0 -60 -70 SSB PHASE NOISE (dBc/Hz) SSB PHASE NOISE (dBc/Hz) -15 -80 10 kHz offset 100 kHz offset -90 -100 -110 -30 +25 C +85 C -40 C -45 -60 -75 -90 -105 -120 -135 -120 1 2 3 4 5 6 7 TUNING VOLTAGE (VOLTS) 8 9 10 -150 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC398QS16G / 398QS16GE v03.0810 Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz Divided Output Power vs. Tuning Voltage, Vcc= +5V* 1.94 0 1.92 -1 DIVIDED OUTPUT POWER (dBm) DIVIDED OUTPUT FREQUENCY (GHz) VCOs - SMT Divided Output Frequency vs. Tuning Voltage, Vcc= +5V 1.9 1.88 1.86 1.84 1.82 1.8 1.78 +25 C +85 C -40 C 1.76 1.74 1.72 -2 -3 +25 C +85 C -40 C -4 -5 -6 -7 -8 -9 -10 1.7 1 2 3 4 5 6 7 8 9 10 1 2 3 TUNING VOLTAGE (VOLTS) 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) SSB PHASE NOISE (dBc/Hz) Divided Output SSB Phase Noise @ Vtune = 5V 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 3 10 4 10 5 6 10 7 10 10 OFFSET FREQUENCY (Hz) Absolute Maximum Ratings Typical Supply Current vs. Vcc Vcc (V) Icc (mA) -65 to +150 °C 4.75 300 -40 to +85 °C 5.0 325 0 to 11V 5.25 350 Vcc1, Vcc2 +5.5 Storage Temperature Operating Temperature Vtune Note: VCO will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS *Note: Tuning voltage must not drop below 1.0V for proper divider output. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC398QS16G / 398QS16GE v03.0810 Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz VCOs - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC398QS16G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC398QS16GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] HMC398 XXXX HMC398 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Descriptions Pin Number Function Description 1 RFOUT RF output (AC coupled). 2, 3, 4, 6, 8, 9, 10, 13, 14, 16 N/C No Connection 5 VTUNE Control Voltage Input. Modulation port bandwidth dependent on drive source impedance. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC398QS16G / 398QS16GE v03.0810 Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz VCOs - SMT Pin Descriptions Pin Number Function Description 7, 15 VCC1, VCC2 Supply Voltage, 5V 11 OUT Divided Output 12 NOUT Divided Output 180° output phase with pin 11. GND Package bottom has an exposed metal paddle that must be RF & DC grounded. Interface Schematic Typical Application Circuit 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC398QS16G / 398QS16GE v03.0810 Ku-Band MMIC VCO with DIVIDE-BY-8 14 - 15 GHz VCOs - SMT Evaluation PCB List of Materials for Evaluation PCB 104711 Item Description J1 - J4 PCB Mount SMA RF Connector J5 - J6 2 mm DC Header C1 - C2 10 µF Tantalum Capacitor C3 - C6 1,000 pF Capacitor 0402 Pkg. U1 HMC398QS16G / HMC398QS16GE VCO PCB [2] 104436 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 6