HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Typical Applications
Features
High Dynamic Range Infrastructure:
Input IP3: +35 dBm
• GSM, GPRS & EDGE
Conversion Loss: 8.8 dB
• CDMA & W-CDMA
No External Components
• Cable Modem Termination Systems
Ultra Small MSOP Package: 14.8mm2
Included in the HMC-DK003 Designer’s Kit
TE
Functional Diagram
General Description
B
SO
LE
The HMC400MS8(E) is a high dynamic range passive
MMIC mixers in plastic surface mount 8 lead Mini
Small Outline Packages (MSOP) covering 1.7 to 2.2
GHz. Excellent input IP3 performance of +36 dBm for
down conversion and +29 dBm for up conversion is
provided for 2.5G & 3G GSM/CDMA based UMTS or
PCS applications at an LO drive of +17 dBm. With a
1 dB compression of +21 dBm, the RF port will accept
a wide range of input signal levels. Conversion loss
is 8.5dB typical and LO isolations are maintained at
22 to 33 dB. This miniature single-ended monolithic
GaAs FET mixer does not require any external
components or bias. The 50 to 300 MHz IF frequency
response will satisfy many UMTS/PCS transmit
or receive frequency plans configured for low side
LO. The HMC400MS8(E) input IP3 performance
coupled with its high P1dB rivals traditional
active FET mixers while offering a much smaller
14.8mm2 standard IC footprint and no DC bias.
O
MIXERS - HIGH IP3 - SMT
9
Electrical Specifi cations, TA = +25°C, LO = +17 dBm, IF = 200 MHz*
Parameter
Min.
Typ.
Max.
Min.
Typ.
Max.
Min.
Typ.
Max.
Units
Frequency Range, RF
1.7 - 1.8
1.8 - 2.0
2.0 - 2.2
GHz
Frequency Range, LO
1.4 - 1.75
1.5 - 1.95
1.7 - 2.15
GHz
Frequency Range, IF
DC - 300
DC - 300
DC - 300
MHz
Conversion Loss
9
11
8.8
10.5
8.8
10.5
dB
Noise Figure (SSB)
9
11
8.8
10.5
8.8
10.5
dB
LO to RF Isolation
29
33
24
30
20
25
dB
LO to IF Isolation
16
20
17
22
19
25
dB
IP3 (Input)
30
34
32
36
28
32
dBm
1 dB Gain Compression (Input)
18
21
18
21
18
22
dBm
+16 to +18
dBm
LO Input Drive Level (Typical)
+16 to +18
+16 to +18
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
9 - 238
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Isolation @ LO = +17 dBm
0
-5
-10
+ 25C
+ 85C
- 40C
-15
-40
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
1.7
2.3
1.8
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
2.2
2.3
LE
1.7
Return Loss @ LO = +17 dBm
Conversion Gain vs. LO Drive
0
0
-5
-5
-10
B
SO
CONVERSION GAIN (dB)
9
-30
-20
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
-15
-20
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
-10
-15
RF
LO
-20
-25
-30
1.7
2.3
Upconverter Performance
Conversion Gain @ LO = +17 dBm
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
If Bandwidth @ LO = +17 dBm
O
0
0
-5
-5
RESPONSE (dB)
CONVERSION GAIN (dB)
-20
TE
-10
RF TO IF
LO TO RF
LO TO IF
MIXERS - HIGH IP3 - SMT
ISOLATION (dB)
0
RETURN LOSS (dB)
CONVERSION GAIN (dB)
Conversion Gain vs.
Temperature @ LO = +17 dBm
-10
-15
-10
CONVERSION GAIN
RETURN LOSS
-15
-20
-20
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
2.3
50
100
150
200 250 300 350
IF FREQUENCY (MHz)
400
450
500
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 239
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Input IP3 vs.
Temperature, LO = +17 dBm
40
35
35
INPUT IP3 (dBm)
40
30
+ 25C
+ 85C
- 40C
25
20
20
90
120
150
180
210
240
IF FREQUENCY (MHz)
Input IP3 vs.
IF Frequency, RF = 1.95 GHz
40
270
300
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
2.3
2.2
2.3
2.2
2.3
LE
60
Input IP3 vs. LO Drive
40
30
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
25
20
60
90
120
150
180
210
240
IF FREQUENCY (MHz)
270
INPUT IP3 (dBm)
35
B
SO
35
30
20
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
O
Upconverter IP3 vs.
LO Drive, IF = 200 MHz
40
35
35
INPUT IP3 (dBm)
40
30
LO = +15dBm
LO = +16dBm
LO = +17dBm
LO = +19dBm
25
+ 15dBm
+ 16dBm
+ 17dBm
+ 19dBm
25
300
Input IP3 vs.
IF Frequency, RF = 2.15 GHz
INPUT IP3 (dBm)
30
TE
LO = +15dBm
LO = +16dBm
LO = +17dBm
LO = +19dBm
25
INPUT IP3 (dBm)
MIXERS - HIGH IP3 - SMT
9
INPUT IP3 (dBm)
Input IP3 vs.
IF Frequency, RF = 1.75 GHz
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
30
25
20
20
60
90
120
150
180
210
240
IF FREQUENCY (MHz)
270
300
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
9 - 240
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Input IP2 vs. LO Drive @ LO = +17 dBm
45
45
40
40
35
+ 25C
+ 85C
- 40C
25
20
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
Input P1dB vs.
Temperature @ LO = +17 dBm
17
15
1.7
B
SO
23
19
1.7
+ 25C
+ 85C
- 40C
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
1.9
2
2.1
RF FREQUENCY (GHz)
2.2
2.3
nLO
mRF
0
1
2
3
4
0
xx
-11
7
4
8
1
9
0
24
31
27
2
71
70
49
58
64
3
79
80
80
79
77
4
77
80
80
79
80
RF Freq = 2 GHz @ -10 dBm
LO Freq = 1.8 GHz @ +17 dBm
All values in dBc relative to the IF output power.
2.3
Absolute Maximum Ratings
O
Harmonics of LO
nLO Spur @ RF Port
LO Freq (GHz)
1.8
MxN Spurious Outputs
25
21
2.3
LE
1.7
INPUT P1dB (dBm)
+ 15 dBm
+ 16 dBm
+ 17 dBm
+ 19 dBm
25
20
9
30
TE
30
35
MIXERS - HIGH IP3 - SMT
INPUT IP2 (dBm)
INPUT IP2 (dBm)
Input IP2 vs.
Temperature @ LO = +17 dBm
1
2
3
RF/IF Input
+27 dBm
4
LO Drive
+27 dBm
1.4
42
26
56
46
Storage Temperature
-65 to +150 °C
1.55
33
25
56
53
Operating Temperature
-40 to +85 °C
1.7
29
29
49
50
IF DC Current
±40 mA
1.85
26
31
44
53
2
24
36
44
48
2.15
21
38
43
49
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LO = +17 dBm
All values are in dBc below input LO level @ RF port.
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 241
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Outline Drawing
TE
LE
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
B
SO
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
O
MIXERS - HIGH IP3 - SMT
9
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC400MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC400MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H400
XXXX
[2]
H400
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
9 - 242
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Pin Descriptions
Description
Interface Schematic
1
LO
This pin is AC coupled & matched to 50 Ohms
from 1.4 to 2.2 GHz. Blocking capacitors are required
if line potential is not equal to 0V.
2, 4
N/C
Not connected.
3, 6, 7
GND
This pin must be connected to RF ground.
5
IF Port
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
8
RF Port
This pin is DC coupled & matched to 50 Ohm
from 1.7 to 2.2 GHz
LE
O
B
SO
9
MIXERS - HIGH IP3 - SMT
Function
TE
Pin Number
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 243
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Evaluation PCB
B
SO
LE
MIXERS - HIGH IP3 - SMT
TE
9
O
List of Materials for Evaluation PCB 101830 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
U1
HMC400MS8 / HMC400MS8E Mixer
PCB [2]
101828 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
9 - 244
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC400MS8 / 400MS8E
v02.0705
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
MIXERS - HIGH IP3 - SMT
9
O
B
SO
LE
TE
Notes:
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 245
工商网监
湘ICP备2023018690号
