HMC406MS8GE

HMC406MS8G / 406MS8GE v06.0611 Amplifiers - Linear & Power - SMT GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Typical Applications Features The HMC406MS8G(E) is ideal for: Gain: 17 dB • WiMAX & WiLAN Saturated Power: +29 dBm • DSRC 38% PAE • Military & Maritime Supply Voltage: +5V • Private Mobile Radio Power Down Capability • UNII & ISM Low External Part Count Functional Diagram General Description The HMC406MS8G(E) is a high efficiency GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC Power amplifier which operates between 5 and 6 GHz. The amplifier is packaged in a low cost, surface mount 8 leaded package with an exposed base for improved RF and thermal performance. With a minimum of external components, the amplifier provides 17 dB of gain and +29 dBm of saturated power at 38% PAE from a +5V supply voltage. Vpd can be used for full power down or RF output power/ current control. Electrical Specifications, TA = +25° C, Vs = 5V, Vpd = 5V Parameter Min. Frequency Range Gain 13 Gain Variation Over Temperature Input Return Loss Min. 16 21 0.03 0.04 21 24 34 38 Saturated Output Power (Psat) 14 Noise Figure Max. Units GHz 17 21 dB 0.03 0.04 dB/ °C 11 dB 9 dB 24 27 dBm 29 dBm 34 38 dBm 27 Output Third Order Intercept (IP3) Typ. 5.7 - 5.9 8 Output Power for 1 dB Compression (P1dB) 1 Max. 10 Output Return Loss 6.0 6.0 dB 0.002 / 300 0.002 / 300 mA Vpd = 5V 7 7 mA tON, tOFF 35 35 ns Supply Current (Icq) Vpd = 0V/5V Control Current (Ipd) Switching Speed Typ. 5-6 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Gain vs. Temperature 20 22 15 20 18 16 5 GAIN (dB) RESPONSE (dB) 10 0 -5 14 12 10 +25 C +85 C -40 C 8 -10 6 -15 S21 S11 S22 -20 4 2 0 -25 3 4 5 6 7 4.5 8 5 5.5 Input Return Loss vs. Temperature 6.5 Output Return Loss vs. Temperature 0 0 +25 C +85 C -40 C RETURN LOSS (dB) -5 RETURN LOSS (dB) 6 FREQUENCY (GHz) FREQUENCY (GHz) -10 -15 +25 C +85 C -40 C -20 -5 -10 -25 -30 -15 4.5 5 5.5 6 6.5 4.5 5 FREQUENCY (GHz) 6 6.5 Psat vs. Temperature 34 34 30 30 Psat (dBm) P1dB (dBm) P1dB vs. Temperature 26 22 +25 C +85 C -40 C 18 5.5 FREQUENCY (GHz) Amplifiers - Linear & Power - SMT Broadband Gain & Return Loss 26 +25 C +85 C -40 C 22 18 14 14 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 4.5 5 5.5 6 6.5 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz 44 36 39 30 34 IP3 (dBm) Pout (dBm), GAIN (dB), PAE (%) Output IP3 vs. Temperature 42 24 18 24 12 19 Pout (dBm) Gain (dB) PAE (%) 6 14 4.5 0 0 2 4 6 8 10 12 14 16 5 5.5 6 6.5 FREQUENCY (GHz) 18 INPUT POWER (dBm) Gain & Power vs. Supply Voltage 10 24 32 9 23 31 8 22 30 7 21 29 20 28 19 27 18 26 17 25 GAIN dB) NOISE FIGURE (dB) Noise Figure vs. Temperature 6 5 4 3 +25 C +85 C -40 C 2 16 1 15 0 14 4.5 5 5.5 6 6.5 5 5.25 Vcc SUPPLY VOLTAGE (V) Gain, Power & Quiescent Supply Current vs. Vpd @ 5.8 GHz GAIN (dB), P1dB (dBm), Psat (dBm) Reverse Isolation Power Down Isolation -20 -30 -40 -50 33 350 30 315 27 280 24 245 21 210 Icq 18 175 15 140 12 105 Gain P1dB Psat 9 70 35 6 0 3 -60 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 2.5 Icq (mA) ISOLATION (dB) 23 22 4.75 0 -10 24 P1dB Psat Gain FREQUENCY (GHz) Reverse Isolation vs. Temperature 3 +25 C +85 C -40 C 29 P1dB, Psat (dBm) Amplifiers - Linear & Power - SMT Power Compression @ 5.8 GHz 3 3.5 4 4.5 5 Vpd (V) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Collector Bias Voltage (Vcc) +5.5V Control Voltage (Vpd) +5.5V RF Input Power (RFIN)(Vs = Vpd = +5V) +20 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 32 mW/°C above 85 °C) 2.1 W Thermal Resistance (junction to ground paddle) 31 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85° C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Amplifiers - Linear & Power - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC406MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC406MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H406 XXXX H406 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Amplifiers - Linear & Power - SMT Pin Descriptions 5 Pin Number Function Description 1 Vpd Power Control Pin. For maximum power, this pin should be connected to 5V. A higher voltage is not recommended. For lower idle current, this voltage can be reduced. 2, 4, 7 GND Ground: Backside of package has exposed metal ground slug that must be connected to ground thru a short path. Vias under the device are required. 3 RFIN This pin is AC coupled and matched to 50 Ohms. 5, 6 RFOUT RF output and bias for the output stage. The power supply for the output device needs to be supplied to these pins. Vcc Power supply voltage for the first amplifier stage. An external bypass capacitor of 330 pF is required. This capacitor should be placed as close to the devices as possible. 8 Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Note 1: C3 should be located < 0.020” from Pin 8 (Vcc) Note 2: C2 should be located < 0.020” from L1. TL1 TL2 TL3 Impedance 50 ohm 50 ohm 50 ohm Physical Length 0.0443” 0.2556” 0.1000” 11.3° 65.2° 25.5° Edge of package pin to center of capacitor C5. Center of capacitor C5 to center of bias line. Center of bias line to edge of capacitor C6. Electrical Length @ 5.5 GHz Measurement Amplifiers - Linear & Power - SMT Application Circuit PCB Material: 10 mil Rogers 4350 or Arlon 25FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Amplifiers - Linear & Power - SMT Evaluation PCB List of Materials for Evaluation PCB 104989 Item Description J1 - J2 PCB Mount SMA RF Connector J3 2mm DC Header C1 - C3 330 pF Capacitor, 0603 Pkg. C4 2.2 µF Capacitor, Tantalum C5 0.6 pF Capacitor, 0603 Pkg. C6 1.6 pF Capacitor, 0603 Pkg. C7 100 pF Capacitor, 0603 Pkg. L1 3.9 nH Inductor, 0603 Pkg. U1 HMC406MS8G(E) Amplifier PCB [2] 105021 Eval Board [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Roger 4350 or Arlon 25FR 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC406MS8G / 406MS8GE v06.0611 GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz Amplifiers - Linear & Power - SMT Notes: Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8