HMC406MS8G / 406MS8GE
v06.0611
Amplifiers - Linear & Power - SMT
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Typical Applications
Features
The HMC406MS8G(E) is ideal for:
Gain: 17 dB
• WiMAX & WiLAN
Saturated Power: +29 dBm
• DSRC
38% PAE
• Military & Maritime
Supply Voltage: +5V
• Private Mobile Radio
Power Down Capability
• UNII & ISM
Low External Part Count
Functional Diagram
General Description
The HMC406MS8G(E) is a high efficiency GaAs
InGaP Heterojunction Bipolar Transistor (HBT) MMIC
Power amplifier which operates between 5 and 6
GHz. The amplifier is packaged in a low cost, surface
mount 8 leaded package with an exposed base
for improved RF and thermal performance. With
a minimum of external components, the amplifier
provides 17 dB of gain and +29 dBm of saturated
power at 38% PAE from a +5V supply voltage. Vpd
can be used for full power down or RF output power/
current control.
Electrical Specifications, TA = +25° C, Vs = 5V, Vpd = 5V
Parameter
Min.
Frequency Range
Gain
13
Gain Variation Over Temperature
Input Return Loss
Min.
16
21
0.03
0.04
21
24
34
38
Saturated Output Power (Psat)
14
Noise Figure
Max.
Units
GHz
17
21
dB
0.03
0.04
dB/ °C
11
dB
9
dB
24
27
dBm
29
dBm
34
38
dBm
27
Output Third Order Intercept (IP3)
Typ.
5.7 - 5.9
8
Output Power for 1 dB Compression (P1dB)
1
Max.
10
Output Return Loss
6.0
6.0
dB
0.002 / 300
0.002 / 300
mA
Vpd = 5V
7
7
mA
tON, tOFF
35
35
ns
Supply Current (Icq)
Vpd = 0V/5V
Control Current (Ipd)
Switching Speed
Typ.
5-6
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Gain vs. Temperature
20
22
15
20
18
16
5
GAIN (dB)
RESPONSE (dB)
10
0
-5
14
12
10
+25 C
+85 C
-40 C
8
-10
6
-15
S21
S11
S22
-20
4
2
0
-25
3
4
5
6
7
4.5
8
5
5.5
Input Return Loss vs. Temperature
6.5
Output Return Loss vs. Temperature
0
0
+25 C
+85 C
-40 C
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
6
FREQUENCY (GHz)
FREQUENCY (GHz)
-10
-15
+25 C
+85 C
-40 C
-20
-5
-10
-25
-30
-15
4.5
5
5.5
6
6.5
4.5
5
FREQUENCY (GHz)
6
6.5
Psat vs. Temperature
34
34
30
30
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
26
22
+25 C
+85 C
-40 C
18
5.5
FREQUENCY (GHz)
Amplifiers - Linear & Power - SMT
Broadband Gain & Return Loss
26
+25 C
+85 C
-40 C
22
18
14
14
4.5
5
5.5
FREQUENCY (GHz)
6
6.5
4.5
5
5.5
6
6.5
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
44
36
39
30
34
IP3 (dBm)
Pout (dBm), GAIN (dB), PAE (%)
Output IP3 vs. Temperature
42
24
18
24
12
19
Pout (dBm)
Gain (dB)
PAE (%)
6
14
4.5
0
0
2
4
6
8
10
12
14
16
5
5.5
6
6.5
FREQUENCY (GHz)
18
INPUT POWER (dBm)
Gain & Power vs. Supply Voltage
10
24
32
9
23
31
8
22
30
7
21
29
20
28
19
27
18
26
17
25
GAIN dB)
NOISE FIGURE (dB)
Noise Figure vs. Temperature
6
5
4
3
+25 C
+85 C
-40 C
2
16
1
15
0
14
4.5
5
5.5
6
6.5
5
5.25
Vcc SUPPLY VOLTAGE (V)
Gain, Power & Quiescent
Supply Current vs. Vpd @ 5.8 GHz
GAIN (dB), P1dB (dBm), Psat (dBm)
Reverse Isolation
Power Down Isolation
-20
-30
-40
-50
33
350
30
315
27
280
24
245
21
210
Icq
18
175
15
140
12
105
Gain
P1dB
Psat
9
70
35
6
0
3
-60
4.5
5
5.5
FREQUENCY (GHz)
6
6.5
2.5
Icq (mA)
ISOLATION (dB)
23
22
4.75
0
-10
24
P1dB
Psat
Gain
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
3
+25 C
+85 C
-40 C
29
P1dB, Psat (dBm)
Amplifiers - Linear & Power - SMT
Power Compression @ 5.8 GHz
3
3.5
4
4.5
5
Vpd (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Collector Bias Voltage (Vcc)
+5.5V
Control Voltage (Vpd)
+5.5V
RF Input Power (RFIN)(Vs = Vpd = +5V)
+20 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 32 mW/°C above 85 °C)
2.1 W
Thermal Resistance
(junction to ground paddle)
31 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85° C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Amplifiers - Linear & Power - SMT
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC406MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC406MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H406
XXXX
H406
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Amplifiers - Linear & Power - SMT
Pin Descriptions
5
Pin Number
Function
Description
1
Vpd
Power Control Pin. For maximum power, this pin should be
connected to 5V. A higher voltage is not recommended. For
lower idle current, this voltage can be reduced.
2, 4, 7
GND
Ground: Backside of package has exposed metal ground
slug that must be connected to ground thru a short path.
Vias under the device are required.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
5, 6
RFOUT
RF output and bias for the output stage. The power supply
for the output device needs to be supplied to these pins.
Vcc
Power supply voltage for the first amplifier stage. An
external bypass capacitor of 330 pF is required. This
capacitor should be placed as close to the devices as
possible.
8
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Note 1: C3 should be located < 0.020” from Pin 8 (Vcc)
Note 2: C2 should be located < 0.020” from L1.
TL1
TL2
TL3
Impedance
50 ohm
50 ohm
50 ohm
Physical Length
0.0443”
0.2556”
0.1000”
11.3°
65.2°
25.5°
Edge of package pin to
center of capacitor C5.
Center of capacitor C5
to center of bias line.
Center of bias line to
edge of capacitor C6.
Electrical Length @ 5.5 GHz
Measurement
Amplifiers - Linear & Power - SMT
Application Circuit
PCB Material: 10 mil Rogers 4350 or Arlon 25FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Amplifiers - Linear & Power - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104989
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3
2mm DC Header
C1 - C3
330 pF Capacitor, 0603 Pkg.
C4
2.2 µF Capacitor, Tantalum
C5
0.6 pF Capacitor, 0603 Pkg.
C6
1.6 pF Capacitor, 0603 Pkg.
C7
100 pF Capacitor, 0603 Pkg.
L1
3.9 nH Inductor, 0603 Pkg.
U1
HMC406MS8G(E) Amplifier
PCB [2]
105021 Eval Board
[1]
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350 or Arlon 25FR
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Amplifiers - Linear & Power - SMT
Notes:
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8