HMC410AMS8G

HMC410AMS8G / 410AMS8GE v00.0410 10 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Typical Applications Features The HMC410AMS8G(E) is ideal for: Conversion Loss: 8 dB • Long Haul Radio Platforms LO/RF Isolation: 40 dB • Microwave Radio LO/IF Isolation: 37 dB • VSAT Input IP3: +24 dBm TE MSOP8G SMT Package General Description LE Functional Diagram B SO The HMC410AMS8G(E) is a passive double-balanced high IP3 mixer that operates between 9 and 15 GHz. The HMC410AMS8G(E) operates with LO drive levels between +13 dBm and +19 dBm, and provides 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C O Mixers - SINGLE & DOUBLE BALANCED - SMT No External Components IF = 1.45 GHz LO = +17 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF Typ. Units Max. 9 - 15 GHz DC - 2.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF Isolation 30 40 - 45 dB LO to IF Isolation 30 37 dB RF to IF Isolation 8 17 dB IP3 (Input) 20 24 dBm 1 dB Compression (Input) 11 14 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +17 dBm Isolation @ LO = +17 dBm 0 -30 -40 TE +25 C -40 C +85 C -15 -50 -60 8 9 10 11 12 13 14 15 16 8 9 10 11 12 13 14 15 16 14 15 16 15 16 FREQUENCY (GHz) LE FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +17 dBm 0 0 +11 dBm +13 dBm +15 dBm -10 -15 8 +17 dBm +19 dBm -5 B SO -5 -20 9 10 11 12 13 14 15 -10 -15 RF LO -20 -25 8 16 9 10 12 13 Upconverter Performance Conversion Gain @ LO = +17 dBm O IF Bandwidth @ LO = +17 dBm 0 0 CONVERSION GAIN (dB) -5 -10 -15 -20 IF CONVERSION GAIN IF RETURN LOSS -25 11 FREQUENCY (GHz) FREQUENCY (GHz) RESPONSE (dB) 10 -20 -30 -5 -10 Mixers - SINGLE & DOUBLE BALANCED - SMT ISOLATION (dB) -10 -20 CONVERSION GAIN (dB) RF/IF LO/RF LO/IF -10 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 -15 -20 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 8 9 10 11 12 13 14 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +17 dBm* 35 30 30 P1dB (dBm) 35 25 TE 25 +15 dBm +17 dBm +19 dBm 20 +25 C -40 C +85 C 20 15 15 9 10 11 12 13 14 9 15 10 11 12 13 14 15 14 15 FREQUENCY (GHz) FREQUENCY (GHz) LE Input P1dB vs. Temperature @ LO = +17 dBm Input IP2 vs. LO Drive * 20 80 75 60 55 50 B SO 65 +15 dBm +17 dBm +19 dBm 45 40 9 10 11 12 13 14 15 P1dB (dBm) 18 70 IP2 (dBm) 16 +25 C -40 C +85 C 14 12 10 9 10 FREQUENCY (GHz) MxN Spurious @ IF Port O Mixers - SINGLE & DOUBLE BALANCED - SMT 10 P1dB (dBm) Input IP3 vs. LO Drive* mRF 0 1 11 13 Harmonics of LO nLO Spur @ RF Port nLO 2 12 FREQUENCY (GHz) 3 4 LO Freq. (GHz) 1 2 3 4 60 0 XX 4 28 23 N/A 9 34 28 46 1 15 0 40 62 46 10.5 37 37 50 69 2 85 70 67 78 83 12 44 45 46 60 3 >90 >90 >90 79 >90 13.5 47 46 62 N/A 4 N/A >90 >90 >90 >90 15 40 56 58 N/A 16.5 34 47 51 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Absolute Maximum Ratings +27 dBm IF DC Current ±4 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 10 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO LE Outline Drawing NOTES: O 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC410AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC410AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Mixers - SINGLE & DOUBLE BALANCED - SMT +20 dBm LO Drive TE RF / IF Input Package Marking [3] H410A XXXX H410A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Pin Descriptions 10 - 5 Description Interface Schematic 1, 8 GND Pins and exposed ground slug must be connected to RF ground. 2 LO This pin is AC coupled and matched to 50 Ohms. 3, 4, 6 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5 IF This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die nonfunction and possible die failure will result. 7 RF LE TE Function B SO This pin is DC coupled and matched to 50 Ohms. O Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Pin Number Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Evaluation PCB O List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC410AMS8G(E) Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT B SO LE TE 10 10 - 6