HMC422MS8ETR

HMC422MS8 / 422MS8E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Features The HMC422MS8 / HMC422MS8E is ideal for: Integrated LO Amplifier w/ Pdiss 85 >85 83 69 80 >85 >85 2.2 2.4 2.6 nLO Spur @ RF Port 0 >85 2 FREQUENCY (GHz) Harmonics of LO mRF 4 2.4 17 B SO 5 1.4 2.2 20 17 8 2 LE 20 11 1.8 Input IP3 vs. Temperature @ LO = 0 dBm* Input IP3 vs. LO Drive* 14 1.6 FREQUENCY (GHz) INPUT IP3 (dBm) CONVERSION GAIN (dB) +25 C -40 C +85 C 13 -5 -20 INPUT IP3 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 0 >85 >85 RF = 2.1 GHz @ -10 dBm LO = 2 GHz @ 0 dBm All values in dBc relative to the IF power level. LO Freq. (GHz) 1 2 3 4 1.5 33 14 38 35 1.75 30 16 39 44 2 29 17 45 47 2.25 27 20 50 52 2.5 25 26 49 61 3 22 37 69 72 LO = 0 dBm All values in dBc below input LO level @ RF port. * Two-tone input power= 0 dBm each tone, 1 MHz spacing. 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd +7 Vdc IF DC Current ±10 mA Channel Temperature (Tc) 150 °C Continuous Pdiss (T = 85°C) (Derate 5.8 mW/°C above 85 C) 0.38 W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A B SO LE Outline Drawing 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. O 2. LEAD MATERIAL: COPPER ALLOY 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. CHARACTERS TO BE HELVETICA MEDIUM, .030 HIGH, LASER OR WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 7. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish MSL Rating HMC422MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC422MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Mixers - SINGLE & DOUBLE BALANCED - SMT TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Package Marking [3] H422 XXXX H422 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz 5 Function Description 1 LO This pin is AC coupled and matched to 50 Ohms. 2, 3, 6, 7 GND Pins must connect to RF ground. 4 Vdd Power supply for the LO Amplifier. One external RF bypass capacitor (10,000 pF) is required. IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 10 mA of current or die non-function and possible die failure will result. 8 LE B SO 5 Interface Schematic TE Pin Number RF This pin is DC coupled and matched to 50 Ohms. O Mixers - SINGLE & DOUBLE BALANCED - SMT Pin Descriptions Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz O List of Materials for Evaluation PCB 105188 Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J5 DC Pin C1 10k pF Chip Capacitor, 0603 Pkg. U1 HMC422MS8 / HMC422MS8E Mixer PCB [2] 104813 Evaluation PCB, 1.0” x 1.0” [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT B SO LE TE Evaluation PCB 6