HMC469MS8G / 469MS8GE
v01.0605
Typical Applications
Features
The HMC469MS8G /HMC469MS8GE is a dual
RF/IF gain block & LO or PA driver:
P1dB Output Power: +18 dBm
• Cellular / PCS / 3G
Output IP3: +34 dBm
• Fixed Wireless & WLAN
Supply (Vs): +5V to +12V
• CATV, Cable Modem & DBS
14.9 mm2 Ultra Small 8 Lead MSOP
Gain: 15 dB
TE
• Microwave Radio & Test Equipment
General Description
The HMC469MS8G & HMC469MS8GE are SiGe HBT
Dual Channel Gain Block MMIC SMT amplifiers
covering DC to 5 GHz. These versatile products
contain two gain blocks, packaged in a single 8 lead
plastic MSOP, for use as either separate cascadable
50 Ohm RF/IF gain stages, LO or PA drivers or with
both amplifiers combined utilizing external 90°
hybrids to create a high linearity driver amplifier. Each
amplifier in the HMC469MS8G(E) offers 15 dB of
gain, +18 dBm P1dB with a +34 dBm output IP3 at
850 MHz while requiring only 75 mA from a single
positive supply. The combined dual amplifier circuit
delivers up to +20 dBm P1dB with +35 dBm OIP3
for specific application bands through 4 GHz.
B
SO
LE
Functional Diagram
Electrical Specifi cations, Vs= 8.0 V, Rbias= 51 Ohm, TA = +25° C
Parameter
Gain
Gain Variation Over Temperature
Input Return Loss
O
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
9
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Output Return Loss
Reverse Isolation
Output Power for 1 dB Compression (P1dB)
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
Noise Figure
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 5 GHz
DC - 1.0 GHz
1.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
0.5 - 1.0 GHz
1.0 - 2.5 GHz
2.5 - 4.0 GHz
4.0 - 5.0 GHz
DC - 3.0 GHz
3.0 - 5.0 GHz
Supply Current (Icq)
Min.
Typ.
12.5
11
10
9
7.5
15
13
12
11
9.5
0.008
12
10
8
14
10
8
6
18
18
16
14
12.5
11
34
30
25
23
4.0
5.0
15
13
11
9.5
8
75
Max.
0.012
Units
dB
dB
dB
dB
dB
dB/ °C
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dB
dB
mA
Note: Data taken with broadband bias tee on device output. All specifi cations refer to a single amplifi er.
9 - 44
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
9
20
15
GAIN (dB)
S21
S11
S22
0
-5
-15
8
+25C
+85C
-40C
4
-20
-25
0
0
1
2
3
4
5
6
7
8
0
1
3
4
5
6
FREQUENCY (GHz)
Output Return Loss vs. Temperature
Input Return Loss vs. Temperature
0
0
-10
B
SO
-5
+25C
+85C
-40C
-15
-20
0
1
2
3
4
5
-5
-10
+25C
+85C
-40C
-15
-20
6
0
1
FREQUENCY (GHz)
O
Reverse Isolation vs. Temperature
3
4
5
6
5
6
Noise Figure vs. Temperature
0
10
-5
8
-10
2
FREQUENCY (GHz)
NOISE FIGURE (dB)
REVERSE ISOLATION (dB)
2
LE
FREQUENCY (GHz)
RETURN LOSS (dB)
12
TE
-10
RETURN LOSS (dB)
RESPONSE (dB)
5
+25C
+85C
-40C
-15
-20
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
16
10
+25C
+85C
-40C
6
4
2
-25
0
0
1
2
3
4
5
6
FREQUENCY (GHz)
0
1
2
3
4
FREQUENCY (GHz)
Data shown is of a single amplifi er.
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 45
HMC469MS8G / 469MS8GE
v01.0605
Psat vs. Temperature
22
20
20
18
18
16
16
14
14
Psat (dBm)
22
12
10
6
10
8
+25C
+85C
-40C
6
+25C
+85C
-40C
4
12
TE
8
4
2
2
0
0
0
1
2
3
4
5
6
0
B
SO
35
+25C
+85C
-40C
20
15
0
1
2
3
3
4
5
6
Vcc vs. Icc Over Temperature for
Fixed Vs= 8V, RBIAS= 51 Ohms
30
24
18
12
Gain
P1dB
Psat
IP3
6
0
5
6
7
8
O
10
11
12
0
+85C
-5
PATH ISOLATION (dB)
Icc (mA)
9
Cross Channel Isolation
78
+25C
74
72
-40C
70
68
66
3.8
6
Vs (Vdc)
82
76
5
36
FREQUENCY (GHz)
80
4
Gain, Power & OIP3 vs. Supply Voltage
for Constant Icc= 75 mA @ 850 MHz
40
25
2
FREQUENCY (GHz)
Output IP3 vs. Temperature
30
1
LE
FREQUENCY (GHz)
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
P1dB (dBm)
P1dB vs. Temperature
IP3 (dBm)
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
9
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
-10
INPUT1-OUTPUT2
-15
INPUT2-OUTPUT1
-20
-25
-30
-35
-40
-45
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
Vcc (Vdc)
0
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
Data shown is of a single amplifi er.
9 - 46
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Input & Output Return Loss *
20
9
0
RETURN LOSS (dB)
GAIN (dB)
15
10
+25C
+85C
-40C
5
-10
-20
TE
0
INPUT RETURN LOSS
OUTPUT RETURN LOSS
-30
-5
-10
0.5
-40
1
1.5
2
2.5
3
0
1.5
2
2.5
3
2.4
2.6
2.4
2.6
Output IP3*
0
40
-20
-30
0
0.5
1
1.5
2
2.5
IP3 (dBm)
35
B
SO
-10
-40
30
+25C
+85C
-40C
25
20
1.4
3
1.6
FREQUENCY (GHz)
2
2.2
FREQUENCY (GHz)
22
20
20
18
18
Psat (dBm)
22
16
+25C
+85C
-40C
14
16
+25C
+85C
-40C
14
12
10
1.4
1.8
Output Psat*
O
Output P1dB*
P1dB (dBm)
1
FREQUENCY (GHz)
Reverse Isolation*
REVERSE ISOLATION (dB)
0.5
LE
FREQUENCY (GHz)
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
Gain*
12
1.6
1.8
2
2.2
2.4
2.6
FREQUENCY (GHz)
10
1.4
1.6
1.8
2
2.2
FREQUENCY (GHz)
* Measurements shown are of both channels with 1.5 - 2.5 GHz 90° splitter/combiners on input & output
(see application circuit for balanced operation).
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 47
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Absolute Maximum Ratings
+6.0 Vdc
Collector Bias Current (Icc)
100 mA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
RF Input Power (RFIN)(Vcc = +4.2 Vdc)
+17 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 29.58 mW/°C above 85 °C)
1.92 W
Thermal Resistance
(junction to ground paddle)
33.8 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
TE
Collector Bias Voltage (Vcc)
B
SO
LE
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
O
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
9
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC469MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC469MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H469
XXXX
[2]
H469
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
9 - 48
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Pin Descriptions
Description
1
RFIN1
This pin is DC coupled.
An off chip DC blocking capacitor is required.
8
RFOUT1
RF output and DC Bias (Vcc1) for the output stage.
2, 3, 6, 7
N/C
No connection. These pins may be connected to RF ground.
Performance will not be affected.
4
RFIN2
This pin is DC coupled.
An off chip DC blocking capacitor is required.
LE
B
SO
5
Interface Schematic
RF output and DC Bias (Vcc2) for the output stage.
GND
Ground paddle must be connected to RF/DC ground.
O
Ground
Paddle
RFOUT2
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
Function
TE
Pin Number
9 - 49
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Application Circuit for Balanced Operation
TE
LE
B
SO
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. RBIAS provides DC bias stability over temperature.
Recommended Bias Resistor Values
for Icc= 75 mA, Rbias= (Vs - Vcc) / Icc
O
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
9
Supply Voltage
(Vs)
5V
6V
8V
10V
12V
RBIAS VALUE
13 Ω
27 Ω
51 Ω
82 Ω
110 Ω
RBIAS POWER RATING
1/8 W
1/4 W
1/2 W
1/2 W
1W
Recommended Component Values for Key Application Frequencies
Frequency (MHz)
Component
9 - 50
50
900
1900
2200
2400
3500
5000
L1, L2
270 nH
56 nH
18 nH
18 nH
15 nH
8.2 nH
6.8 nH
C4, C5, C9, C10
0.01 μF
100 pF
100 pF
100 pF
100 pF
100 pF
100 pF
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC469MS8G / 469MS8GE
v01.0605
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
Evaluation PCB
O
List of Materials for Evaluation PCB 109164 [1]
Item
Description
J1 - J4
PCB Mount SMA Connector
J5 - J8
DC Pins
L1, L2
Inductor, 0402 Pkg.
C1, C8
2.2 μF Capacitor, Tantalum
C2, C7
1000 pF Capacitor, 0402 Pkg.
C3, C6
100 pF Capacitor, 0402 Pkg.
C4, C5, C9, C10
Capacitor, 0402 Pkg.
R1, R2
Resistor, 2010 Pkg.
U1
HMC469MS8G / HMC469MS8GE
PCB [2]
109162 Evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
B
SO
LE
TE
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 51
工商网监
湘ICP备2023018690号
