HMC476MP86ETR

HMC476MP86 / 476MP86E v01.0505 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Typical Applications Features The HMC476MP86 / HMC476MP86E is an ideal RF/ IF gain block & LO or PA driver for: P1dB Output Power: +12 dBm • Cellular / PCS / 3G Output IP3: +25 dBm • Fixed Wireless & WLAN Cascadable 50 Ohm I/Os • CATV, Cable Modem & DBS Single Supply: +5V to +12V • Microwave Radio & Test Equipment Included in the HMC-DK001 Designer’s Kit Functional Diagram General Description Gain: 20 dB The HMC476MP86 & HMC476MP86E are SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 6 GHz. This Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +13 dBm output power. The HMC476MP86 & HMC476MP86E offers 20 dB of gain with a +25 dBm output IP3 at 850 MHz while requiring only 35 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 5V, Rbias= 56 Ohm, TA = +25° C Parameter Gain Gain Variation Over Temperature DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 6.0 GHz Min. Typ. 18.5 15.5 13.5 11.5 9.0 20.0 17.0 15.0 13.0 10.5 Max. Units dB dB dB dB dB DC - 6 GHz 0.008 Input Return Loss DC - 1.0 GHz 1.0 - 6.0 GHz 20 15 dB dB Output Return Loss DC - 4.5 GHz 4.5 - 6.0 GHz 20 13 dB dB DC - 6 GHz 18 dB 12.0 11.0 dBm dBm Reverse Isolation dB/ °C Output Power for 1 dB Compression (P1dB) 0.5 - 5.0 GHz 5.0 - 6.0 GHz Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) DC - 5 GHz 5.0 - 6.0 GHz 25 23 dBm dBm Noise Figure DC - 3.0 GHz 3.0 - 6.0 GHz 2.5 3.5 dB dB 35 mA Supply Current (Icq) 9.0 8.0 0.012 Note: Data taken with broadband bias tee on device output. 8-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC476MP86 / 476MP86E v02.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Broadband Gain & Return Loss Gain vs. Temperature 8 24 25 20 20 5 S21 S11 S22 0 -5 -10 16 12 +25 C +85 C -40 C 8 -15 -20 4 -25 0 -30 0 1 2 3 4 5 6 7 0 8 1 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) 0 +25 C +85 C -40 C -15 -20 -25 4 5 6 +25 C +85 C -40 C -10 -15 -20 -25 -30 -30 0 1 2 3 4 5 6 0 1 FREQUENCY (GHz) 2 3 4 5 6 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature Noise Figure vs. Temperature 8 0 -5 NOISE FIGURE (dB) REVERSE ISOLATION (dB) 3 Output Return Loss vs. Temperature Input Return Loss vs. Temperature -10 2 FREQUENCY (GHz) FREQUENCY (GHz) +25 C +85 C -40 C -10 -15 -20 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 10 GAIN (dB) RESPONSE (dB) 15 +25 C +85 C -40 C 6 4 2 -25 0 -30 0 1 2 3 4 FREQUENCY (GHz) 5 6 0 1 2 3 4 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-2 HMC476MP86 / 476MP86E v02.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz P1dB vs. Temperature 15 15 12 12 Psat (dBm) P1dB (dBm) 18 9 +25 C +85 C -40 C 6 9 +25 C +85 C -40 C 6 3 3 0 0 0 1 2 3 4 5 6 0 1 2 FREQUENCY (GHz) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 26 22 +25 C +85 C -40 C 14 10 0 1 2 3 4 5 6 Gain, Power & OIP3 vs. Supply Voltage for Constant Id= 35 mA @ 850 MHz 30 18 3 FREQUENCY (GHz) Output IP3 vs. Temperature IP3 (dBm) 4 5 6 28 24 20 16 12 8 Gain P1dB Psat IP3 4 0 5 6 7 FREQUENCY (GHz) 8 9 10 Vs (Vdc) Vcc vs. Icc Over Temperature for Fixed Vs= 5V, RBIAS= 56 Ohms Icc (mA) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature 18 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 2.7 +85 C +25 C -40 C 2.8 2.9 3 3.1 3.2 3.3 3.4 Vcc (Vdc) 8-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC476MP86 / 476MP86E v02.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Absolute Maximum Ratings +6.0 Vdc Collector Bias Current (Icc) 45 mA RF Input Power (RFIN)(Vcc = +3.0 Vdc) +5 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 7.75 mW/°C above 85 °C) 0.504 W Thermal Resistance (junction to lead) 129 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 5. THE MICRO-P PACKAGE IS DIMENSIONALLY COMPATIBLE WITH THE “MICRO-X PACKAGE” 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) Package Information Part Number Package Body Material Lead Finish MSL Rating HMC476MP86 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC476MP86E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [1] 476 [2] 476 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-4 HMC476MP86 / 476MP86E v02.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Pin Descriptions AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins must be connected to RF/DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 35 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 5V 8V 10V 12V RBIAS VALUE 56 Ω 130 Ω 180 Ω 240 Ω RBIAS POWER RATING 1/8 W 1/4 W 1/4 W 1/2 W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 8-5 50 900 1900 2200 2400 3500 5200 5800 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH 3.3 nH C1, C2 0.01 μF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC476MP86 / 476MP86E v02.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Evaluation PCB List of Materials for Evaluation PCB 107487 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 μF Capacitor, Tantalum R1 Resistor, 1210 Pkg. L1 Inductor, 0603 Pkg. U1 HMC476MP86 / HMC476MP86E PCB [2] 107087 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-6