HMC483MS8G / 483MS8GE
v01.0710
Typical Applications
Features
The HMC483MS8G / HMC483MS8GE is ideal for:
+33 dBm Input IP3
• Cellular/3G
Conversion Loss: 9 dB
• GSM, GPRS & EDGE
Low LO Drive: -4 to +4 dBm
• CDMA & WCDMA
Single Positive Supply: 5V @ 50 mA
• Cable Modem Termination Systems
Ultra Small MSOP Package: 14.8mm2
TE
Included in the HMC-DK003 Designer’s Kit
Functional Diagram
General Description
LE
The HMC483MS8G & HMC483MS8GE are high dynamic range passive MMIC mixers with integrated
LO amplifiers in plastic surface mount 8 lead Mini
Small Outline Packages (MSOP) covering 0.7 to 1.5
GHz. Excellent input IP3 performance of +33 dBm
for down conversion and +30 dBm for up conversion
is provided for 2.5G & 3G GSM/CDMA applications
at an LO drive of 0 dBm. With an input 1 dB compression
of +24 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 9 dB typical.
The DC to 350 MHz IF frequency response will satisfy
GSM/CDMA transmit or receive frequency plans
configured for low side LO. The HMC483MS8G(E)
are pin for pin compatible with the HMC485MS8G(E)
which are 1.7 - 2.2 GHz mixers with LO amplifiers.
B
SO
MIXERS - HIGH IP3 - SMT
10
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
O
Electrical Specifi cations, TA = +25°C, LO = 0 dBm, IF = 70 MHz*, Vdd= 5V
Parameter
Min.
Typ.
Frequency Range, RF & LO
0.8 - 1.1
Frequency Range, IF
DC - 350
Max.
Min.
Typ.
Max.
0.7 - 1.5
Units
GHz
DC - 350
MHz
Conversion Loss
8.5
10.5
9
12
dB
Noise Figure (SSB)
8.5
10.5
9
12
dB
LO to RF Isolation
10
20
6
14
LO to IF Isolation
6
10
6
13
dB
dB
IP3 (Input)
33
33
dBm
1 dB Gain Compression (Input)
24
23
dBm
-4 to +4
-4 to +4
dBm
50
50
mA
LO Input Drive Level (Typical)
Supply Current
*Unless otherwise noted, all measurements performed as a downconverter.
10 - 230
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Isolation
0
-5
-10
-10
TE
+ 25C
+ 85C
- 40C
-15
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
-40
0.6
1.5
1.1
1.2
1.3
1.4
1.5
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
-5
-10
-15
LO
RF
-20
1.5
0.6
0.7
0.8
RF FREQUENCY (GHz)
Upconverter Performance
Conversion Gain
0
-5
-5
RESPONSE (dB)
0
-10
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
-15
0.9
1
1.1
1.2
FREQUENCY (GHz)
1.3
1.4
1.5
IF Bandwidth
O
CONVERSION GAIN (dB)
1
LE
-5
-20
0.6
0.9
0
B
SO
CONVERSION GAIN (dB)
0
-20
0.6
0.8
Return Loss
Conversion Gain vs. LO Drive
-15
0.7
FREQUENCY (GHz)
RF FREQUENCY (GHz)
-10
RF TO IF
LO TO RF
LO TO IF
-30
-20
0.6
10
-20
MIXERS - HIGH IP3 - SMT
ISOLATION (dB)
0
RETURN LOSS (dB)
CONVERSION GAIN (dB)
Conversion Gain vs. Temperature
CONVERSION GAIN
RETURN LOSS
-10
-15
-20
0.7
0.8
0.9
1
1.1
1.2
RF FREQUENCY (GHz)
1.3
1.4
1.5
0
80
160
240
320
400
IF FREQUENCY (MHz)
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 70 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 231
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Input IP3 vs. LO Drive
40
35
35
INPUT IP3 (dBm)
40
+ 25C
+ 85C
- 40C
20
0.8
0.9
1
1.1
1.2
FREQUENCY (GHz)
1.3
0.7
0.8
0.9
1
1.1
1.2
FREQUENCY (GHz)
1.3
1.4
0.9
1
1.1
1.2
FREQUENCY (GHz)
1.3
1.4
1.5
1.3
1.4
1.5
1.4
1.5
30
0.6
40
25
30
INPUT IP3 (dBm)
30
20
+ 25C
+ 85C
- 40C
15
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
25
0.7
0.8
0.9
1
1.1
1.2
FREQUENCY (GHz)
Upconverter IP3 vs. LO Drive
O
INPUT P1dB (dBm)
0.8
20
1.5
10
10 - 232
INPUT IP2 (dBm)
+ 25C
+ 85C
- 40C
Input P1dB vs. Temperature
0.6
0.7
35
B
SO
0.6
0.6
40
35
20
1.5
Input IP2 vs. LO Drive
40
25
1.4
LE
0.7
Input IP2 vs. Temperature
30
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
25
20
0.6
30
TE
30
25
INPUT IP2 (dBm)
MIXERS - HIGH IP3 - SMT
10
INPUT IP3 (dBm)
Input IP3 vs. Temperature
20
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
10
0
0.7
0.8
0.9
1
1.1
1.2
FREQUENCY (GHz)
1.3
1.4
1.5
0.7
0.8
0.9
1
1.1
1.2
1.3
RF FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
MxN Spurious Outputs
Harmonics of LO
nLO Spur at RF Port
0
1
2
3
4
LO Freq GHz
1
2
3
4
0
xx
-9
24
3
16
0.7
21
23
24
25
4
0
30
15
28
0.8
15
23
18
43
2
66
71
50
61
61
0.9
12
26
23
39
3
83
95
103
89
95
1
9
22
33
32
4
106
105
103
108
108
1.1
6
22
42
27
TE
1
1.2
RF Freq = 0.87 GHz @ -10 dBm
LO Freq = 0.8 GHz @ 0 dBm
All values in dBc Relative to the IF power level.
Absolute Maximum Ratings
+10 dBm
Bias Supply (Vdd)
+7 Vdc
Channel Temperature
150 °C
Continuous Pdiss (T = 85°C)
(Derate 8.95 mW/°C above 85°C)
0.58 W
Thermal Resistance (RTH)
(Channel to ground paddle)
111.7 °C/W
Storage Temperature
-65 to +150 °C
25
26
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LE
+27 dBm
LO Drive
21
B
SO
RF/IF Input
3
LO power = 0 dBm
All values in dBc below input LO level measured at RF port.
Operating Temperature
-40 to +85 °C
IF DC Current
±40 mA
ESD Sensitivity (HBM)
Class 1B
10
MIXERS - HIGH IP3 - SMT
nLO
mRF
O
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 233
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Package Information
Package Body Material
Lead Finish
HMC483MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC483MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Function
1
LO
10 - 234
Description
[1]
H483
XXXX
[2]
H483
XXXX
Interface Schematic
This pin is AC coupled
and matched to 50 Ohms.
N/C
Not connected. This pin may be connected to RF/DC
ground without affecting performance.
3, 6, 7
GND
This pin and the ground paddle must be
connected to RF ground.
4
Vdd
Power supply for LO amplifier.
An external RF bypass capacitor is required.
5
IF
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
8
RF
This pin is DC coupled
and matched to 50 Ohms.
2
Package Marking [3]
B
SO
Pin Number
LE
Pin Descriptions
MSL Rating
TE
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
O
MIXERS - HIGH IP3 - SMT
10
Part Number
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Evaluation PCB
MIXERS - HIGH IP3 - SMT
B
SO
LE
TE
10
O
List of Materials for Evaluation PCB 105188 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J5
DC Pin
C1
10,000 pF Chip Capacitor, 0603 Pkg.
U1
HMC483MS8G / HMC483MS8GE Mixer
PCB [2]
104813 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 235