HMC486LP5ETR

HMC486LP5 / 486LP5E v02.0110 LINEAR & POWER AMPLIFIERS - SMT 11 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Typical Applications Features The HMC486LP5(E) is ideal for: Saturated Power: +33 dBm @ 20% PAE • Point-to-Point Radios Output IP3: +40 dBm • Point-to-Multi-Point Radios Gain: 22 dB • Test Equipment and Sensors Supply: +7V @ 1300 mA • Military End-Use 50 Ohm Matched Input/Output 32 Lead 5x5mm SMT Package: 25mm2 General Description Functional Diagram The HMC486LP5(E) is a high dynamic range GaAs pHEMT MMIC 2 Watt Power Amplifier housed in a leadless 5x5 mm surface mount packages. Operating from 7 to 9 GHz, the amplifier provides 22 dB of gain, +33 dBm of saturated power and 20% PAE from a +7V supply voltage. Output IP3 is +40 dBm typical. The RF I/Os are DC blocked and matched to 50 Ohms for ease of use. The HMC486LP5(E) eliminate the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, Vdd1, 2, 3, 4, 5 = +7V, Idd = 1300 mA* Parameter Min. Frequency Range Gain 18 Gain Variation Over Temperature Max. Min. 19 0.07 17 8 29 32 Max. 28 Units GHz 22 0.05 12 Output Return Loss Typ. 8-9 21 0.05 Input Return Loss Output Power for 1 dB Compression (P1dB) Typ. 7-8 dB 0.07 dB/ °C dB 5 dB 31 dBm Saturated Output Power (Psat) 33 32 dBm Output Third Order Intercept (IP3) 41 38 dBm Noise Figure Supply Current (Idd)(Vdd = +7V, Vgg = -0.3V Typ.) 7.0 7.5 dB 1300 1300 mA * Adjust Vgg between -2 to 0V to achieve Idd = 1300 mA typical. 11 - 256 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC486LP5 / 486LP5E v02.0110 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Gain vs. Temperature Broadband Gain and Return Loss 25 30 25 S21 S11 S22 5 GAIN (dB) -5 20 15 -15 5 -25 0 4 5 6 7 8 9 10 11 6 6.5 7 FREQUENCY (GHz) 8 8.5 9 9.5 10 Output Return Loss vs. Temperature 0 0 +25 C +85 C -40 C +25 C +85 C -40 C -2 RETURN LOSS (dB) -5 RETURN LOSS (dB) 7.5 FREQUENCY (GHz) Input Return Loss vs. Temperature -10 -15 -20 -4 -6 -8 -25 -10 6 6.5 7 7.5 8 8.5 9 9.5 10 6 6.5 7 FREQUENCY (GHz) 8 8.5 9 9.5 9 9.5 10 Psat vs. Temperature 34 32 32 Psat (dBm) 34 30 +25 C +85 C -40 C 28 7.5 FREQUENCY (GHz) P1dB vs. Temperature P1dB (dBm) 11 +25 C +85 C -40 C 10 26 LINEAR & POWER AMPLIFIERS - SMT RESPONSE (dB) 15 30 +25 C +85 C -40 C 28 26 24 24 6 6.5 7 7.5 8 8.5 9 9.5 10 FREQUENCY (GHz) 6 6.5 7 7.5 8 8.5 10 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 11 - 257 HMC486LP5 / 486LP5E v01.0705 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Output IP3 vs. Temperature Power Compression @ 8 GHz 44 Pout (dBm), GAIN (dB), PAE (%) 36 11 IP3 (dBm) 40 36 +25 C +85 C -40 C 32 24 6 6.5 7 7.5 8 8.5 9 9.5 18 Pout Gain PAE 12 6 0 -10 10 -6 -2 Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 42 40 38 36 34 32 Gain P1dB Psat IP3 28 26 24 22 20 6.5 6 10 14 18 Gain, Power & OIP3 vs. Supply Current @ 8 GHz Gain, Power & OIP3 vs. Supply Voltage @ 8 GHz 30 2 INPUT POWER (dBm) 7 7.5 42 40 38 36 34 32 30 28 Gain P1dB Psat IP3 26 24 22 20 700 800 900 Vdd Supply Voltage (Vdc) 1000 1100 1200 1300 Idd Supply Current (mA) Reverse Isolation vs. Temperature Noise Figure vs. Temperature 14 0 12 -10 +25 C +85 C -40 C ISOLATION (dB) 10 8 6 4 -20 -30 +25 C +85 C -40 -40 C -50 2 -60 0 -70 6 6.5 7 7.5 8 8.5 9 9.5 10 FREQUENCY (GHz) 11 - 258 24 FREQUENCY (GHz) NOISE FIGURE (dB) LINEAR & POWER AMPLIFIERS - SMT 28 30 6 6.5 7 7.5 8 8.5 9 9.5 10 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC486LP5 / 486LP5E v01.0705 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Typical Supply Current vs. Vdd Power Dissipation* Max Pdiss @ +85C 10 Vdd (V) Idd (mA) +6.5 1330 +7.0 1300 +7.5 1285 9.5 9 Note: Amplifi er will operate over full voltage ranges shown above. Vgg adjusted to achieve Idd= 1300 mA at +7V. 8.5 8 GHz 7.5 7 -10 11 Absolute Maximum Ratings 8 -6 -2 2 6 10 14 18 INPUT POWER (dBm) * Please refer to “Thermal Management for Surface Mount Components” application note at www.hittite.com/ ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Drain Bias Voltage (Vdd1, 2, 3, 4, 5) +8V Gate Bias Voltage (Vgg) -2 to 0V RF Input Power (RFIN)(Vdd = +7V) +20 dBm Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 154 mW/°C above 85 °C) 10 W Thermal Resistance (channel to ground paddle) 6.5 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. LINEAR & POWER AMPLIFIERS - SMT POWER DISSIPATION (W) 10.5 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC486LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC486LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H486 XXXX [2] H486 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 11 - 259 HMC486LP5 / 486LP5E v01.0705 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Pin Descriptions Pin Number Function Description 1-3, 5-8, 10-12, 14, 15, 17-20, 22-24, 26, 27, 29-31 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 4 RFIN This pin is AC coupled and matched to 50 Ohms. 9 Vgg Gate control for amplifier. Adjust to achieve Idd of 1300 mA. Please follow “MMIC Amplifier Biasing Procedure” Application Note. External bypass capacitors of 100 pF and 2.2 μF are required. 21 RFOUT This pin is AC coupled and matched to 50 Ohms. 32, 28, 25, 13, 16 Vdd1, Vdd2, Vdd3, Vdd4, Vdd5 Power Supply Voltage for the amplifier. External bypass capacitors of 100 pF and 2.2 μF are required. Package Bottom GND Ground: Backside of package has exposed metal ground slug that must be connected to ground through a short path. Vias under the device are required LINEAR & POWER AMPLIFIERS - SMT 11 11 - 260 Interface Schematic Application Circuit Component Value C1 100 pF C2 2.2 μF For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC486LP5 / 486LP5E v01.0705 SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7 - 9 GHz Evaluation PCB List of Materials for Evaluation PCB 108190 [1] Item Description J1, J2 SRI PC Mount SMA Connector J3, J4 2mm DC Header C1 - C6 100 pF Capacitor, 0402 Pkg. C7 - C12 2.2μF Capacitor, Tantalum U1 HMC486LP5(E) Amplifier PCB [2] 108188 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350. The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. Copper filled vias under the device are recommended. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. LINEAR & POWER AMPLIFIERS - SMT 11 11 - 261