HMC487LP5E
v03.0819
AMPLIFIERS - LINEAR & POWER - SMT
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Typical Applications
Features
The HMC487LP5E is ideal for use as a
power amplifier for:
Saturated Power: +33 dBm @ 20% PAE
• Point-to-Point Radios
Gain: 20 dB
• Point-to-Multi-Point Radios
+7V @ 1300 mA Supply
• Test Equipment and Sensors
50 Ohm Matched Input/Output
• Military End-Use
25 mm2 Leadless SMT Package
Functional Diagram
General Description
Output IP3: +36 dBm
The HMC487LP5E is a high dynamic range GaAs
PHEMT MMIC 2 Watt Power Amplifiers housed
in leadless 5 x 5 mm surface mount packages.
Operating from 9 to 12 GHz, the amplifier provides
20 dB of gain, +33 dBm of saturated power and 20%
PAE from a +7V supply voltage. Output IP3 is +36 dBm
typical. The RF I/Os are DC blocked and matched to 50
Ohms for ease of use. The HMC487LP5E eliminates
the need for wire bonding, allowing use of surface
mount manufacturing techniques.
Electrical Specifications, TA = +25° C, Vdd1, 2, 3, 4, 5 = +7V, Idd = 1300 mA*
Parameter
Min.
Frequency Range
Gain
17
Gain Variation Over Temperature
Max.
Min.
19
0.07
15
7
29
32
Max.
28
Units
GHz
22
0.05
7
Output Return Loss
Typ.
11 - 12
20
0.05
Input Return Loss
Output Power for 1 dB Compression (P1dB)
Typ.
9 - 11
dB
0.07
dB/ °C
dB
15
dB
31
dBm
Saturated Output Power (Psat)
33
32
dBm
Output Third Order Intercept (IP3)
36
35
dBm
Noise Figure
Supply Current (Idd)(Vdd = +7V, Vgg = -0.3V Typ.)
9
8
dB
1300
1300
mA
* Adjust Vgg between -2 to 0V to achieve Idd = 1300 mA typical.
1
Information
furnished
by Analog
is believed
to be
accurate
and reliable.
However,
For price,Way,
delivery,
placeNorwood,
orders: Analog
Devices, Inc.,
For price,
delivery,
andDevices
to place
orders:
Analog
Devices,
Inc.,
One no
Technology
P.O.and
Boxto9106,
MA 02062-9106
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One
Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700
• Order
at www.analog.com
rights of third parties that may result from its use. Specifications
subject to change without
notice.online
No
Phone:
781-329-4700
•
Order
online
at
www.analog.com
license is granted by implication or otherwise under any patent
or patent rights
of Analog
Devices. 1-800-ANALOG-D
Application
Support:
Phone:
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC487LP5E
v03.0819
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Broadband Gain and Return Loss
Gain vs. Temperature
30
25
20
S21
S11
S22
5
GAIN (dB)
RESPONSE (dB)
15
-5
15
+25 C
+85 C
-40 C
10
-15
5
0
-25
6
7
8
9
10
11
12
13
14
8
15
9
Input Return Loss vs. Temperature
12
13
0
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
11
Output Return Loss vs. Temperature
0
-10
-15
+25 C
+85 C
-40 C
-20
-25
-5
-10
+25 C
+85 C
-40 C
-15
-20
8
9
10
11
12
13
8
9
FREQUENCY (GHz)
11
12
13
12
13
Psat vs. Temperature
36
34
34
32
32
Psat (dBm)
36
30
+25 C
+85 C
-40 C
28
10
FREQUENCY (GHz)
P1dB vs. Temperature
P1dB (dBm)
10
FREQUENCY (GHz)
FREQUENCY (GHz)
AMPLIFIERS - LINEAR & POWER - SMT
25
30
+25 C
+85 C
-40 C
28
26
26
24
24
8
9
10
11
FREQUENCY (GHz)
12
13
8
9
10
11
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
2
HMC487LP5E
v03.0819
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Output IP3 vs. Temperature
Power Compression @ 10.5 GHz
36
Pout (dBm), GAIN (dB), PAE (%)
38
IP3 (dBm)
34
30
26
22
+25 C
+85 C
-40 C
18
14
8
9
10
11
12
30
24
18
Pout
Gain
PAE
12
6
0
-10
10
13
-6
-2
Gain Power and OIP3
vs. Supply Voltage @10.5 GHz
36
34
32
30
Gain
P1dB
Psat
IP3
24
22
20
18
6.5
7
7.5
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
38
26
6
10
14
18
Gain, Power and OIP3
vs. Supply Current @ 10.5 GHz
40
28
2
INPUT POWER (dBm)
FREQUENCY (GHz)
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
AMPLIFIERS - LINEAR & POWER - SMT
42
42
38
34
30
Gain
P1dB
Psat
IP3
26
22
18
800
900
Vdd Supply Voltage (Vdc)
1000
1100
1200
1300
Idd Supply Current (mA)
Noise Figure vs. Temperature
Reverse Isolation vs. Temperature
15
0
-10
ISOLATION (dB)
NOISE FIGURE (dB)
12
9
6
-30
+25 C
+85 C
-40 C
-40
-50
+25 C
+85 C
-40 C
3
-60
0
-70
8
9
10
11
FREQUENCY (GHz)
3
-20
12
13
8
9
10
11
12
13
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC487LP5E
v03.0819
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
POWER DISSIPATION (W)
11
Vdd (Vdc)
Idd (mA)
+6.5
1330
+7.0
1300
+7.5
1285
Max Pdiss @ +85C
10
9
8
Note: Amplifier will operate over full voltage ranges shown
above. Vgg adjusted to achieve Idd= 1300 mA at +7.0V.
11 GHz
Absolute Maximum Ratings
7
6
5
-10 -8
-6
-4
-2
0
2
4
6
8
10
12
14
16
INPUT POWER (dBm)
* Refer to “Thermal Management for Surface Mount
Components” application note herein.
Drain Bias Voltage (Vdd1, 2, 3, 4, 5)
+8 Vdc
Gate Bias Voltage (Vgg)
-2.0 to 0 Vdc
RF Input Power (RFIN)(Vdd = +7.0 Vdc)
+20 dBm
Channel Temperature
150 °C
Continuous Pdiss (T= 85 °C)
(derate 154 mW/°C above 85 °C)
10 W
Thermal Resistance
(channel to ground paddle)
6.5 °C/W
Storage Temperature
ELECTROSTATIC SENSITIVE DEVICE
Operating Temperature
OBSERVE HANDLING PRECAUTIONS
32-Lead Lead Frame Chip Scale Package [LFCSP]
-65 to +150 °C
-40 to +85 °C
5 x 5 mm Body and 0.85 mm Package Height
(HCP-32-1)
Dimensions shown in millimeters
Outline Drawing
DETAIL A
(JEDEC 95)
5.10
5.00 SQ
4.90
0.30
0.25
0.18
PIN 1
INDICATOR AREA OPTIONS
1
24
0.50
BSC
3.80
3.70 SQ
3.60
EXPOSED
PAD
17
TOP VIEW
0.90
0.85
0.80
0.45
0.40
0.35
8
16
PKG-004898
9
0.20 MIN
BOTTOM VIEW
3.50 REF
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
(SEE DETAIL A)
32
25
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
02-19-2019-B
PIN 1
INDICATOR
AREA
AMPLIFIERS - LINEAR & POWER - SMT
Typical Supply Current vs. Vdd
Power Dissipation*
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4
32-Lead Lead Frame Chip Scale Package [LFCSP]
5 mm × 5 mm Body and 0.85 mm Package Height
(HCP-32-1)
Dimensions shown in millimeters
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC487LP5ETR
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
[1]
HMC487LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
[1]
Package Marking [2]
H487
XXXX
H487
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
4
HMC487LP5E
v03.0819
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
AMPLIFIERS - LINEAR & POWER - SMT
Pin Descriptions
5
Pin Number
Function
Description
1 - 3, 5 - 8, 10 - 12,
14, 15, 17 - 20, 22 24, 26, 27, 29 - 31
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
4
RFIN
This pin is AC coupled and
matched to 50 Ohms.
9
Vgg
Gate control for amplifier. Adjust to achieve Idd of 1300 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
2.2 µF are required.
21
RFOUT
This pin is AC coupled and
matched to 50 Ohms.
32, 28, 25,
13, 16
Vdd1, Vdd2,
Vdd3, Vdd4,
Vdd5
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 µF are required.
GND
Ground: Backside of package has exposed metal ground
slug that must be connected to ground through a short path.
Vias under the device are required
Interface Schematic
Application Circuit
Component
Value
C1
100 pF
C2
2.2 µF
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC487LP5E
v03.0819
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Vdd1
Vdd2
IN
Vdd3
C8
C7
C9
OUT
C2
C1
C3
RFIN
RFOUT
C4
C6
C2
C12
C10
Vgg
C11
List of Materials for Evaluation PCB 108190
Item
Description
J1, J2
SRI PC Mount SMA Connector
J3, J4
2mm DC Header
C1 - C6
100 pF capacitor, 0402 pkg.
C7 - C12
2.2µF Capacitor, Tantalum
U1
HMC487LP5E Amplifier
PCB [2]
109001 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
Vdd5
Vdd4
AMPLIFIERS - LINEAR & POWER - SMT
Evaluation PCB
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. Copper
filled vias under the device are recommended. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Analog Devices upon request.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
6
