HMC489LP5E

HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz Features The HMC489LP5 / HMC489LP5E is ideal for use as a power amplifier for: Saturated Power: +32 dBm @ 16% PAE • Point-to-Point Radios Gain: 13 dB • Point-to-Multi-Point Radios +7V @ 1300 mA Supply • Test Equipment and Sensors 50 Ohm Matched Input/Output • Military End-Use 25 mm2 Leadless SMT Package Functional Diagram General Description TE Output IP3: +34 dBm B SO LE The HMC489LP5 & HMC489LP5E are high dynamic range GaAs PHEMT MMIC Power Amplifiers housed in leadless 5 x 5 mm surface mount packages. Operating from 12 to 16 GHz, the amplifier provides 13 dB of gain, +32 dBm of saturated power and 16% PAE from a +7V supply voltage. Output IP3 is +34 dBm typical. The RF I/Os are DC blocked and matched to 50 Ohms for ease of use. The HMC489LP5(E)eliminate the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, Vdd1, 2, 3, 4, 5 = +7V, Idd = 1300 mA* O LINEAR & POWER AMPLIFIERS - SMT 11 Typical Applications Parameter Min. Frequency Range Gain 10 Gain Variation Over Temperature Max. Min. 10 0.07 8 8 24 29 Max. 28 Units GHz 13 0.05 12 Output Return Loss Typ. 14 - 16 13 0.05 Input Return Loss Output Power for 1 dB Compression (P1dB) Typ. 12 - 14 dB 0.07 dB/ °C dB 15 dB 31 dBm Saturated Output Power (Psat) 30 32 dBm Output Third Order Intercept (IP3) 32 34 dBm Noise Figure Supply Current (Idd)(Vdd = +7V, Vgg = -0.3V Typ.) 7 9 dB 1300 1300 mA * Adjust Vgg between -2 to 0V to achieve Idd = 1300 mA typical. 11 - 276 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz Gain vs. Temperature Broadband Gain and Return Loss 15 20 16 S21 S11 S22 12 GAIN (dB) -5 8 -15 11 +25 C +85 C -40 C 4 TE RESPONSE (dB) 5 -25 -4 8 9 10 11 12 13 14 15 16 17 18 19 11 0 14 15 16 17 Output Return Loss vs. Temperature 0 -10 +25 C +85 C -40 C -15 -20 -25 11 12 13 14 15 16 RETURN LOSS (dB) -5 B SO -5 -10 -15 +25 C +85 C -40 C -20 -25 17 11 12 FREQUENCY (GHz) 14 15 16 17 16 17 FREQUENCY (GHz) 34 30 30 26 26 Psat (dBm) 34 +25 C +85 C -40 C 22 13 Psat vs. Temperature O P1dB vs. Temperature P1dB (dBm) 13 FREQUENCY (GHz) Input Return Loss vs. Temperature RETURN LOSS (dB) 12 LE FREQUENCY (GHz) 22 18 18 14 14 10 LINEAR & POWER AMPLIFIERS - SMT 0 +25 C +85 C -40 C 10 11 12 13 14 15 16 17 FREQUENCY (GHz) 11 12 13 14 15 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 11 - 277 HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz Output IP3 vs. Temperature Power Compression @ 15 GHz 36 Pout (dBm), GAIN (dB), PAE (%) 40 35 +25 C +85 C -40 C 25 15 10 13 14 15 16 17 12 6 -8 0 4 8 12 16 20 24 LE Gain, Power & OIP3 vs. Supply Current @ 15 GHz B SO Gain, Power & Output IP3 vs. Supply Voltage @ 15 GHz 36 34 32 30 28 26 24 22 20 18 16 14 12 10 6.5 -4 INPUT POWER (dBm) Gain P1dB Psat IP3 7 7.5 Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 12 FREQUENCY (GHz) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 18 0 11 40 35 30 25 Gain P1dB Psat IP3 20 15 10 700 800 Vdd Supply Voltage (Vdc) 900 1000 1100 1200 1300 Idd Supply Current (mA) Reverse Isolation vs. Temperature O Noise Figure vs. Temperature 15 0 12 +25 C +85 C -40 C ISOLATION (dB) -20 9 6 -40 -60 +25 C +85 C -40 C 3 0 -80 11 12 13 14 15 16 17 FREQUENCY (GHz) 11 - 278 24 TE 20 NOISE FIGURE (dB) LINEAR & POWER AMPLIFIERS - SMT 11 IP3 (dBm) 30 Pout Gain PAE 30 11 12 13 14 15 16 17 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz Typical Supply Current vs. Vdd Max Pdiss @ +85C 10 Vdd (Vdc) Idd (mA) +6.5 1330 +7.0 1300 +7.5 1285 9.5 9 Note: Amplifi er will operate over full voltage ranges shown above. Vgg adjusted to achieve Idd= 1300 mA at +7.0V. 8.5 14 GHz TE POWER DISSIPATION (W) 10.5 Absolute Maximum Ratings 8 7.5 7 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 24 INPUT POWER (dBm) +8 Vdc Gate Bias Voltage (Vgg) -2.0 to 0 Vdc RF Input Power (RFIN)(Vdd = +7.0 Vdc) +28 dBm Channel Temperature 150 °C Continuous Pdiss (T= 85 °C) (derate 154 mW/°C above 85 °C) 10 W Thermal Resistance (channel to ground paddle) 6.5 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C LE * Refer to “Thermal Management for Surface Mount Components” application note herein. Drain Bias Voltage (Vdd1, 2, 3, 4, 5) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS O B SO Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 11 LINEAR & POWER AMPLIFIERS - SMT Power Dissipation* 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC489LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC489LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H489 XXXX [2] H489 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 11 - 279 HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz Pin Descriptions Function Description N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 4 RFIN This pin is AC coupled and matched to 50 Ohms. 9 Vgg Gate control for amplifier. Adjust to achieve Idd of 1300 mA. Please follow “MMIC Amplifier Biasing Procedure” Application Note. External bypass capacitors of 100 pF and 2.2 μF are required. 21 RFOUT This pin is AC coupled and matched to 50 Ohms. 32, 28, 25, 13, 16 Vdd1, Vdd2, Vdd3, Vdd4, Vdd5 Power Supply Voltage for the amplifier. External bypass capacitors of 100 pF and 2.2 μF are required. GND Ground: Backside of package has exposed metal ground slug that must be connected to ground through a short path. Vias under the device are required 11 - 280 LE B SO Application Circuit Component C1 C2 Value 100 pF 2.2 μF O LINEAR & POWER AMPLIFIERS - SMT 11 Interface Schematic TE Pin Number 1 - 3, 5 - 8, 10 - 12, 14, 15, 17 - 20, 22 24, 26, 27, 29 - 31 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC489LP5 / 489LP5E v01.0705 SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER, 12 - 16 GHz O List of Materials for Evaluation PCB 108190 [1] Item Description J1, J2 SRI PC Mount SMA Connector J3, J4 2mm DC Header C1 - C6 100 pF capacitor, 0402 pkg. C7 - C12 2.2μF Capacitor, Tantalum U1 HMC489LP5 / HMC489LP5E Amplifier PCB [2] 108188 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350. The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. Copper filled vias under the device are recommended. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 11 LINEAR & POWER AMPLIFIERS - SMT B SO LE TE Evaluation PCB 11 - 281