HMC532LP4 / 532LP4E
v01.0508
MMIC VCO w/ BUFFER
AMPLIFIER, 7.1 - 7.9 GHz
Typical Applications
Features
Low noise MMIC VCO w/Buffer Amplifier for:
Pout: +14 dBm
• VSAT Radio
Phase Noise: -103 dBc/Hz @100 KHz
• Point to Point/Multipoint Radio
No External Resonator Needed
• Test Equipment & Industrial Controls
Single Supply: +3V @ 85 mA
• Military End-Use
24 Lead 4x4mm QFN Package: 9 mm2
Functional Diagram
General Description
The HMC532LP4 & HMC532LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs
with integrated resonators, negative resistance
devices, varactor diodes, and buffer amplifiers.
Covering 7.1 to 7.9 GHz, the VCO’s phase noise
performance is excellent over temperature, shock
and vibration due to the oscillator’s monolithic structure. Power output is +14 dBm typical from a single
supply of +3V @ 85 mA. The voltage controlled
oscillator is packaged in a leadless QFN 4 x 4 mm
surface mount package.
VCOS - SMT
12
Electrical Specifi cations, TA = +25° C, Vcc = +3V
Parameter
Min.
Frequency Range
Power Output
Typ.
12
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
14
Tune Voltage (Vtune)
1
Supply Current (Icc) (Vcc = +3V)
60
85
Units
GHz
17
-101
Tune Port Leakage Current
dBm
dBc/Hz
13
V
100
mA
10
μA
Output Return Loss
15
dB
Harmonics
2nd
3rd
-14
-25
dBc
dBc
Pulling (into a 2.0:1 VSWR)
28
MHz pp
Pushing @ Vtune= +5V
Frequency Drift Rate
12 - 146
Max.
7.1 - 7.9
78
MHz/V
0.85
MHz/°C
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC532LP4 / 532LP4E
v01.0508
MMIC VCO w/ BUFFER
AMPLIFIER, 7.1 - 7.9 GHz
Frequency vs. Tuning Voltage, Vcc= +3V
8.5
8.5
8
8
FREQUENCY (GHz)
7.5
7
2.85V
3.00V
3.15V
6.5
6
7.5
7
+25C
+85C
-40C
6.5
6
5.5
5.5
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
600
20
500
18
+25C
+85C
-40C
300
200
100
0
0
7
8
9
10
11 12
13
12
16
14
12
10
+25C
+85C
-40C
8
6
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
5
6
7
8
9
10
11 12
13
TUNING VOLTAGE (VOLTS)
Phase Noise vs. Tuning Voltage
Typical SSB Phase Noise @ Vtune= +5V
0
SSB PHASE NOISE (dBc/Hz)
0
SSB PHASE NOISE (dBc/Hz)
6
Output Power vs.
Tuning Voltage, Vcc= +3V
OUTPUT POWER (dBm)
SENSITIVITY (MHz/VOLT)
Sensitivity vs. Tuning Voltage, Vcc= +3V
400
5
TUNING VOLTAGE (VOLTS)
VCOS - SMT
FREQUENCY (GHz)
Frequency vs. Tuning Voltage, T= 25°C
-20
10kHz offset
100kHz offset
-40
-60
-20
-40
+25C
+85C
-40C
-60
-80
-100
-80
-120
-100
-140
-120
0
1
2
3
4
5
6
7
8
9
10
11 12
13
TUNING VOLTAGE (VOLTS)
-160
3
10
4
10
5
10
6
10
7
10
OFFSET FREQUENCY (Hz)
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 147
HMC532LP4 / 532LP4E
v01.0508
MMIC VCO w/ BUFFER
AMPLIFIER, 7.1 - 7.9 GHz
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc
+3.5 Vdc
Vcc (V)
Icc (mA)
Vtune
0 to +15V
2.75
74
Channel Temperature
135 °C
Continuous Pdiss (T = 85°C)
(derate 6.07 mW/°C above 85°C)
303 mW
Thermal Resistance
(junction to ground paddle)
165 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
3.0
85
3.25
96
Note: VCO will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
VCOS - SMT
12
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC532LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC532LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H532
XXXX
[2]
H532
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
12 - 148
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC532LP4 / 532LP4E
v01.0508
MMIC VCO w/ BUFFER
AMPLIFIER, 7.1 - 7.9 GHz
Pin Descriptions
Function
Description
Interface Schematic
1- 14, 17 - 19,
21, 23, 24
N/C
No Connection
15
GND
This pin must be connected to RF & DC ground. Package bottom
has an exposed metal paddle that must be RF & DC grounded.
16
RFOUT
RF output (AC coupled)
20
Vcc
Supply Voltage Vcc= 3V
22
VTUNE
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance. See “Determining the FM
Bandwidth of a Wideband Varactor Tuned VCO” application note.
12
VCOS - SMT
Pin Number
Evaluation PCB
List of Materials for Evaluation PCB 105706 [1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J4
DC Pin
C1
4.7 μF Tantalum Capacitor
C2
10,000 pF Capacitor, 0603 Pkg.
U1
HMC532LP4 / HMC532LP4E VCO
PCB [2]
105667 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: Phone:
978-250-3343
978-250-3373
781-329-4700Fax:
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 149
