HMC547LC3
v01.0514
Switches - SPDT - SMT
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Typical Applications
Features
The HMC547LC3 is ideal for:
High Isolation: 45 dB @ 10 GHz
40 dB @ 20 GHz
• Fiber Optics & Broadband Telecom
Low Insertion Loss: 1.6 dB @ 10 GHz
1.9 dB @ 20 GHz
• Microwave Radio & VSAT
• Military Radios, Radar, & ECM
Fast Switching: 6 ns
• Test Instrumentation
Non-Reflective Design
16 Lead Ceramic 3x3 mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC547LC3 is a general purpose broadband high
isolation non-reflective GaAs MESFET SPDT switch
in a ceramic 3x3 mm leadless surface mount package.
Covering DC to 28.0 GHz, the switch offers over 40 dB
isolation and less than 2 dB insertion loss at midband.
The wide bandwidth, fast switching, and compact size
make this absorbtive SPDT ideal for miliitary EW/ECM
and test equipment applications. The switch operates
using complementary negative control voltage logic
lines of -5/0V and requires no bias supply.
Electrical Specifications, TA = +25° C, With 0/-5V Control, 50 Ohm System
Parameter
Insertion Loss
Isolation
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
Return Loss
Return Loss RF1, RF2
1
Frequency
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
Min.
40
34
30
Typ.
Max.
Units
1.6
1.9
2.4
2.2
2.5
3.0
dB
dB
dB
45
40
34
dB
dB
dB
“On State”
DC - 28.0 GHz
17
dB
“Off State”
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
25
15
8
dB
dB
dB
16
23
dBm
Input Power for 1 dB Compression
DC - 0.5 GHz
0.5 - 28.0 GHz
Input Third Order Intercept
(Two-Tone Input Power= +7 dBm Each Tone)
DC - 0.5 GHz
0.5 - 28.0 GHz
26
46
dBm
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 28.0 GHz
3
6
ns
ns
20
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC547LC3
v01.0514
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Return Loss
Insertion Loss
-1
-2
+25 C
+85 C
-40 C
-3
-4
-5
RFC
RF1,RF2 ON
RF1,RF2 OFF
-10
-20
-30
-40
0
5
10
15
20
25
30
0
5
10
FREQUENCY (GHz)
Isolation Between Ports RFC and RF1/RF2
0
-10
-10
ISOLATION (dB)
ISOLATION (dB)
-40
-50
30
-30
-40
-50
-60
-60
-70
-70
-80
-80
0
5
10
15
20
25
30
0
5
10
FREQUENCY (GHz)
15
20
25
30
FREQUENCY (GHz)
Input P1dB and P0.1dB
Compression Point
Input Third Order Intercept Point
55
30
50
25
INPUT IP3 (dBm)
INPUT P1dB AND P0.1dB (dBm)
25
RF1 PATH ON
RF2 PATH ON
-20
RF1
RF2
-30
20
Isolation Between Ports RF1 and RF2
0
-20
15
FREQUENCY (GHz)
Switches - SPDT - SMT
0
RETURN LOSS (dB)
INSERTION LOSS (dB)
0
20
P1dB
P0.1dB
15
10
0.01
0.1
1
FREQUENCY (GHz)
10
45
40
+25 C
+85 C
-40 C
35
30
100
25
0.01
0.1
1
10
100
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC547LC3
v01.0514
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Switches - SPDT - SMT
Absolute Maximum Ratings
3
Control Voltages
RF Input Power (A,B = 0V/-5V)
+25 dBm
State
Bias Condition
Control Voltage Range (A & B)
+5.0V to -7.5V
Low
0 to -0.5V @ 10 uA Max.
Hot Switch Power Level
(A,B = 0V/-5V)
+22 dBm
High
-5V @ 3 uA Typ. to -7V @ 10 uA Typ. (± 0.5V)
Channel Temperature
150 °C
Continuous Pdiss (T=85°C)
(derate 3.3 mW/°C above 85°C)
(Insertion Loss Path)
0.215 W
Thermal Resistance
(Insertion Loss Path)
302 °C/W
Continuous Pdiss (T=85°C)
(derate 5.6 mW/°C above 85°C)
(Terminated Path)
0.363 W
Thermal Resistance
(Terminated Path)
179 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Truth Table
Control Input
Signal Path State
A
B
RFC to RF1
RFC to RF2
High
Low
On
Off
Low
High
Off
On
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC547LC3
v01.0514
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Switches - SPDT - SMT
Outline Drawing
Package Information
Part Number
Package Body Material
Lead Finish
HMC547LC3
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H547
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC547LC3
v01.0514
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Switches - SPDT - SMT
Pin Descriptions
5
Pin Number
Function
Description
1, 5, 9, 12, 16
N/C
This pin should be connected to PCB RF ground to
maximize isolation
2, 4, 6, 8, 13, 15
GND
Package bottom has exposed metal paddle that must also
be connected to PCB RF ground.
3, 7, 14
RFC, RF1, RF2
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
10
B
See truth table and control voltage table.
11
A
See truth table and control voltage table.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC547LC3
v01.0514
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Switches - SPDT - SMT
Evaluation PCB
List of Materials for Evaluation PCB EVAL01-HMC547LC3 [1]
Item
Description
J1 - J3
PCB Mount SRI SMA Connector
J4 - J6
DC Pin
R1 - R2
100 Ohm Resistor, 0603 Pkg.
U1
HMC547LC3 SPDT Switch
PCB [2]
600-00005-00-1 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 Ohm
impedance and the package ground leads and
package bottom should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6