HMC552LP4 / 552LP4E
v03.1210
Typical Applications
Features
The HMC552LP4 / HMC552LP4E is ideal for
Wireless Infrastructure Applications:
Input IP3: +25 dBm
• PCS / 3G Infrastructure
LO to RF Isolation: 30 dB
• Base Stations & Repeaters
Low Conversion Loss: 8 dB
• WiMAX & WiBro
Single Positive Supply: +5V @ 62 mA
• ISM & Fixed Wireless
Robust 1,000V ESD, Class 1C
TE
Low Input LO Drive: -4 to +4 dBm
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
B
SO
LE
The HMC552LP4 & HMC552LP4E are high linearity,
double-balanced converter ICs that operate from
1.6 to 3.0 GHz and deliver a +25 dBm input third
order intercept point. The LO amplifier output and
high dynamic range mixer input are positioned so
that an external LO filter can be placed in series
be-tween them. The converter provides 30 dB of
LO to RF isolation and is ideal for upconverter and
down-converter applications. The IC operates from
a single +5V supply consuming 62 mA of current
and accepts a LO drive level of -4 to +4 dBm. The
design requires no external baluns and supports
IF frequencies between DC and 1 GHz. The
HMC552LP4 & HMC552LP4E are pin for pin compatible with the HMC551LP4 & HMC551LP4E, which
operate from 0.8 to 1.2 GHz.
Electrical Specifications, TA = +25° C, LO = 0 dBm, Vcc = +5V, R1 = 18 Ohms, IF = 100 MHz*
O
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Parameter
Min.
Typ.
Frequency Range, RF, LO
1.6 - 3.0
Frequency Range, IF
DC - 1.0
Max.
Units
GHz
GHz
Conversion Loss
8
10
Noise Figure (SSB)
8
dB
dB
dB
LO to RF Isolation
25
30
LO to IF Isolation
10
20
dB
IP3 (Input)
25
dBm
1 dB Compression (Input)
16
dBm
-4 to +4
dBm
62
mA
LO Drive Input Level (Typical)
Supply Current (Icc)
*Unless otherwise noted, all measurements performed as a downconverter configured as shown in application circuit.
10 - 1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Conversion Gain
vs. Temperature @ LO = 0 dBm
Isolation @ LO = 0 dBm
0
-10
+25C
+85C
-40C
-15
-30
RF to IF
LO to RF
LO to IF
-40
-50
-20
1
1.5
2
2.5
3
1
3.5
1.5
2.5
3
3.5
3
3.5
LE
Conversion Gain vs. LO Drive
Return Loss @ LO = 0 dBm
0
0
-10
B
SO
-5
LO= -4 dBm
LO= -2 dBm
LO= 0 dBm
LO= 2 dBm
LO= 4 dBm
-15
-20
1
1.5
2
2.5
3
-5
-10
RF
LO
-15
-20
3.5
1
1.5
FREQUENCY (GHz)
Upconverter Performance
Conversion Gain vs. LO Drive
2.5
O
IF Bandwidth @ LO = 0 dBm
0
-5
RESPONSE (dB)
-5
-10
LO= -4 dBm
LO= -2 dBm
LO= 0 dBm
LO= 2 dBm
LO= 4 dBm
-15
2
FREQUENCY (GHz)
0
CONVERSION GAIN (dB)
2
FREQUENCY (GHz)
FREQUENCY (GHz)
CONVERSION GAIN (dB)
10
-20
TE
-10
-10
-15
Mixers - SINGLE & DOUBLE BALANCED - SMT
ISOLATION (dB)
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
0
Conversion Gain
Return Loss
-20
-25
-20
1
1.5
2
2.5
FREQUENCY (GHz)
3
3.5
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 2
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Input IP3 vs. LO Drive
35
30
30
25
25
IP3 (dBm)
35
20
+25C
+85C
-40C
15
10
2
2.5
3
5
1.5
3.5
80
3.5
3
3.5
Input IP2 vs. LO Drive
70
60
B
SO
60
20
1.5
3
80
70
30
2.5
FREQUENCY (GHz)
Input IP2 vs. Temperature @ LO = 0 dBm
40
2
LE
FREQUENCY (GHz)
50
LO= -4 dBm
LO= -2 dBm
LO= 0 dBm
LO= 2 dBm
LO= 4 dBm
10
+25C
+85C
-40C
2
2.5
3
3.5
IP2 (dBm)
5
1.5
20
TE
15
IP2 (dBm)
50
40
LO= -4 dBm
LO= -2 dBm
LO= 0 dBm
LO= 2 dBm
LO= 4 dBm
30
20
1.5
2
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs. Temperature @ LO = 0 dBm
20
18
P1dB (dBm)
O
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
IP3 (dBm)
Input IP3 vs. Temperature @ LO = 0 dBm
16
14
+25C
+85C
-40C
12
10
1.5
1.8
2
2.2
2.5
2.7
3
FREQUENCY (GHz)
10 - 3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
MxN Spurious @ IF Port
Harmonics of LO
1
3
4
LO Freq. (GHz)
0
xx
-3
16
1
7
0
23
2
79
66
61
61
3
102
105
93
4
103
107
107
1
2
3
16
25
1.5
27
17
31
32
44
53
1.8
28
16
40
44
98
2.1
28
18
31
47
94
84
2.4
34
21
33
41
102
103
2.7
36
28
42
46
3.0
41
27
48
54
TE
2
nLO Spur @ RF Port
0
RF Freq. = 1.9 GHz @ -10 dBm
LO Freq. = 1.8 GHz @ 0 dBm
All values in dBc relative to the IF power level.
4
LE
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
Typical Supply Current
Icc (mA)
62 mA
O
B
SO
Vcc
+5.0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
Mixers - SINGLE & DOUBLE BALANCED - SMT
nLO
mRF
10 - 4
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Absolute Maximum Ratings
+10 dBm
BIAS
+7 Vdc
Junction Temperature
150°C
Continuous Pdiss (T = 85°C)
(derate 9.5 mW/°C above 85°C)
0.6 W
Thermal Resistance
(junction to ground paddle)
105.6 °C/W
Storage Temperature
-65 to +150°C
Operating Temperature
-40 to +85°C
ESD Sensitivity (HBM)
Class 1C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TE
+31 dBm
LO Drive (Vcc= +5V)
B
SO
LE
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
O
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
RF / IF Input (Vcc= +5V)
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC552LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC552LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H552
XXXX
H552
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
10 - 5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Pin Descriptions
Description
Interface Schematic
1
MIX LO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
2, 6 - 9,
11 - 17, 19 - 24
N/C
No connection. These pins may be connected to RF
ground. Performance will not be affected.
3
BIAS
Power supply for the LO amplifier , a Bias resistor is
required . Three external bypass capacitors are recommended for optimum performance, as illustrated in the
application circuit.
4
GND
Backside of package has exposed metal ground
paddle that must also be connected to ground.
5
LO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
10
IF
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pin must not source/
sink more than 18 mA of current or die non-function
and possible die failure will result.
18
RF
This pin is DC coupled and
matched to 50 Ohms.
LE
B
SO
O
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
Mixers - SINGLE & DOUBLE BALANCED - SMT
Function
TE
Pin Number
10 - 6
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Evaluation PCB
TE
LE
B
SO
List of Materials for Evaluation PCB 113722 [1]
O
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4, J5
DC Pin
C1, C2, C5
100 pF Chip Capacitor, 0402 Pkg.
C3
1000 pF Chip Capacitor, 0603 Pkg.
C4
2.2 µF Capacitor, Tantalum
L1
18 nH Chip Inductor, 0603 Pkg.
R1
18 Ohm Resistor, 1210 1/8 watt Pkg.
U1
HMC552LP4 / HMC552LP4E
PCB [2]
113417 Evaluation Board
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
10 - 7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC552LP4 / 552LP4E
v03.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
Application Circuit
Recommended Components Values (IF = DC - 300 MHz)
1000 pF
C4
2.2 µF
C1, C2, C5
100 pF
L1
Icc = ( Vs - 3.8 ) / R1
18 nH
18 Ohm
O
R1
Select R1 to achieve Icc by using equation below, R1 ≥ 18 Ohms.
B
SO
C3
Note:
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
Mixers - SINGLE & DOUBLE BALANCED - SMT
LE
TE
10
10 - 8