HMC574AMS8TR

Pr el im in ar y Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com Pr el im in ar y THIS PAGE INTENTIONALLY LEFT BLANK HMC574AMS8 / 574AMS8E v00.1115 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Features The HMC574AMS8 / HMC574AMS8E is ideal for: Low Insertion Loss: 0.3 dB • Cellular/3G Infrastructure High Third Order Intercept: +65 dBm • Private Mobile Radio Handsets Isolation: 30 dB • WLAN, WiMAX & WiBro Single Positive Supply: +3 to +8V • Automotive Telematics SMT Package: MSOP8 • Test Equipment Included in the HMC-DK005 Designer’s Kit Functional Diagram General Description y Typical Applications Pr el im in SWITCHES - SMT ar 1 The HMC574AMS8 & HMC574AMS8E are lowcost SPDT switches in 8-lead MSOP packages for use in transmit/receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially suited for Cellular/3G infrastructure, WiMAX and WiBro applications with only 0.3 dB typical insertion loss. The design provides 5 watt power handling performance and +65 dBm third order intercept at +8 Volt bias. RF1 and RF2 are refl ective shorts when “Off”. Electrical Specifi cations, TA = +25° C, Vctl = 0/+5 Vdc, Vdd = +5 Vdc (Unless Otherwise Stated), 50 Ohm System Parameter Frequency Insertion Loss Isolation Return Loss Input Power for 1dB Compression Input Third Order Intercept (Two-tone Input Power = +27 dBm Each Tone) Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V Switching Characteristics 26 24 21 16 0.5 - 3.0 GHz 33 35 37 0.5 - 3.0 GHz Typ. Max. Units 0.25 0.3 0.4 0.5 30 28 25 20 35 25 18 16 36 38 39 55 63 65 0.5 0.6 0.7 0.8 dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 1 Min. DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 80 120 ns ns For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC574AMS8 / 574AMS8E v00.1115 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Bias Voltage & Current Absolute Maximum Ratings 39 dBm -0.2 to +10 Vdc Control Voltage Range (A & B) -0.2 to +Vdd Vdc Hot Switching Power Level Vdd = +8V 39 dBm Channel Temperature 150 °C Continuous Pdiss ( T= + 85 °C) (derate 10 mW/°C above 85 °C) 0.65W Thermal Resistance 100 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Typical Idd (μA) +3 2 +5 10 +8 40 Control Voltages State Bias Condition Low 0 to +0.2 Vdc @ 10 μA Typical High Vdd ± 0.2 Vdc @ 10 μA Typical Truth Table Control Input (Vctl) DC Blocks are required at ports RFC, RF1 and RF2 A B RFC to RF1 RFC to RF2 High Low Off On Low High On Off 2 Pr el Outline Drawing im in ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Signal Path State SWITCHES - SMT Bias Voltage Range (Vdd) Vdd (Vdc) y 0.5 - 2.5 GHz ar Max. Input Power Vdd = 0/+8V NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2