HMC596LP4 / HMC596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Typical Applications
Features
4x2 Switch Matrix for 0.2 - 3.0 GHz Applications:
High Isolation / Low Insertion Loss
• DBS LNBs & Multiswitches
Integrated CMOS Compatible 4 Bit Decoder
• Cable Modem / CATV
Single Positive Supply: Vdd = +5V
• Cellular Systems
24 Lead 4x4mm QFN Package: 9 mm2
4x4 Switch Matrix Using Two ICs
General Description
Functional Diagram
The HMC596LP4 & HMC596LP4E are low-cost 4x2
switch matrices in leadless QFN 4x4 mm surface
mount packages for use in Satellite / DBS, LNBs
and multiswitches from 200 to 3000 MHz. A positive
voltage controlled 4 bit decoder is integrated on the
switch. The switches may be used in either 75 ohm or
50 ohm systems.
SWITCHES - MATRIX - SMT
12
12 - 114
Both switch outputs (OP1 & OP2) can independently
select any of the four inputs (HH, HL, VH, VL) or
simultaneously select the same inputs. Note that the
switch is bi-directional and input/output functionality
may be interchanged. All data presented was
measured in a 50 ohm (input/output) system.
Electrical Specifi cations, TA = +25° C, Vdd= +5V, 50 Ohm System
Parameter
Conditions
Frequency
200 - 950
950 - 2150
2150 - 3000
200 - 950
950 - 1450
1450 - 2150
2150 - 3000
Insertion Loss
Isolation
Return Loss (VL, HL, VH, HH)
Input Selected
200 - 950
950 - 2150
2150 - 3000
Return Loss (VL, HL, VH, HH)
Input Deselected
200 - 950
950 - 2150
2150 - 3000
Min.
42
37
25
10
7
Typ.
Max.
Units
6
6.5
7.5
50
45
43
40
7
8
9
dB
dB
dB
dB
dB
dB
dB
30
15
12
dB
dB
dB
17
22
18
dB
dB
dB
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Electrical Specifi cations, TA = +25° C, Vdd= +5V, 50 Ohm System (Continued)
Parameter
Conditions
Frequency
Min.
Typ.
Return Loss (Output OP1/OP2)
200 - 950
950 - 2150
2150 - 3000
9
11
8
13
14
13
Max.
Units
dB
dB
dB
Output IP3
200 - 3000
22
27
dBm
Input Power for 1 dB Compression
200 - 3000
18
22
dBm
6.0
6.5
ns
ns
Switching Speed
tRISE / tFALL (10/90% RF)
tON / tOFF (50% CTL to 10/90% RF)
OP2 Isolation 950 - 1450 MHz
Input to
Output State
Interfering
Signal
State
Min.
(dB)
Typ.
(dB)
Input to
Output State
Interfering
Signal
State
Min.
(dB)
Typ.
(dB)
HL to OP1
VL to OP1
All Other States
11
All Other States
38
40
41
>43
HL to OP2
HH to OP2
All Other States
15
All Other States
38
40
41
>43
VL to OP1
VH to OP1
All Other States
2
All Other States
39
40
42
>43
VH to OP2
HL to OP2
All Other States
6
All Other States
37
40
40
>43
VH to OP1
All States
All States
43
>46
VL to OP2
HH to OP1
All States
All States
37
>40
HL to OP2
All Other States
1
All Other States
37
40
40
>43
HH to OP2
All States
All States
38
>41
Insertion Loss on OP1
Insertion Loss on OP2
0
VL to OP1 (state 1)
VL to OP1 (state 2)
VH to OP1 (state 5)
VH to OP1 (state 6)
HL to OP1 (state 11)
HL to OP1 (state 12)
HH to OP1 (state 15)
HH to OP1 (state 16)
-2
-4
INSERTION LOSS (dB)
INSERTION LOSS (dB)
0
-6
-8
-10
0.2
VL to OP2 (state 1)
VL to OP2 (state 5)
VH to OP2 (state 2)
VH to OP2 (state 6)
HL to OP2 (state 11)
HL to OP2 (state 15)
HH to OP2 (state 12)
HH to OP2 (state 16)
-2
-4
-6
12
SWITCHES - MATRIX - SMT
OP1 Isolation 950 - 1450 MHz
-8
0.6
1
1.4
1.8
2.2
2.6
3
FREQUENCY (GHz)
-10
0.2
0.6
1
1.4
1.8
2.2
2.6
3
FREQUENCY (GHz)
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 115
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Return Loss
Typical Insertion Loss vs. Temperature
0
0
RETURN LOSS (dB)
-5
INSERTION LOSS (dB)
Input RL, Input Selected
Input RL, Input Deselected
Output RL
-10
-15
-20
-25
+25C
+85C
-40C
-2
-4
-6
-8
-30
-35
0.2
0.6
1
1.4
1.8
2.2
2.6
-10
0.2
3
0.6
1
Isolation When HL is Connected to OP1*
ISOLATION (dB)
ISOLATION (dB)
2.6
3
HH to OP1 (state 8)
HL to OP1 (state 6)
HL to OP1 (state 7)
VL to OP1 (state 6)
VL to OP1 (state 5)
HH to OP1 (state 6)
-10
-30
-40
-50
-20
-30
-40
-50
0.6
1
1.4
1.8
2.2
2.6
-60
0.2
3
0.6
1
FREQUENCY (GHz)
1.4
1.8
2.2
2.6
3
FREQUENCY (GHz)
Isolation When VL is Connected to OP1*
Isolation When HH is Connected to OP1*
0
0
HL to OP1 (state 3)
VH to OP1 (state 2)
HH to OP1 (state 1)
HH to OP1 (state 4)
VH to OP1 (state 1)
HL to OP1 (state 1)
-20
VL to OP1 (state 16)
VH to OP1 (state 16)
VL to OP1 (state 13)
VH to OP1 (state 14)
HL to OP1 (state 16)
HL to OP1 (state 15)
-10
ISOLATION (dB)
-10
ISOLATION (dB)
SWITCHES - MATRIX - SMT
HH to OP1 (state 11)
HH to OP1 (state 12)
VH to OP1 (state 10)
VL to OP1 (state 11)
VL to OP1 (state 9)
VH to OP1 (state 11)
-20
-30
-40
-50
-60
0.2
2.2
0
-10
-60
0.2
1.8
Isolation When VH is Connected to OP1*
0
12
1.4
FREQUENCY (GHz)
FREQUENCY (GHz)
-20
-30
-40
-50
0.6
1
1.4
1.8
2.2
2.6
3
-60
0.2
FREQUENCY (GHz)
0.6
1
1.4
1.8
2.2
2.6
3
FREQUENCY (GHz)
* Isolation is recorded above insertion loss & measured at output of switch.
12 - 116
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Isolation When HL is Connected to OP2*
Isolation When VL is Connected to OP2*
0
0
HH to OP2 (state 11)
HH to OP2 (state 15)
VH to OP2 (state 7)
VH to OP2 (state 11)
VL to OP2 (state 11)
VL to OP2 (state 3)
-20
VH to OP2 (state 1)
VH to OP2 (state 5)
HH to OP2 (state 1)
HH to OP2 (state 13)
HL to OP2 (state 1)
HL to OP2 (state 9)
-10
ISOLATION (dB)
-30
-40
-50
-20
-30
-40
-50
-60
0.2
0.6
1
1.4
1.8
2.2
2.6
-60
0.2
3
0.6
1
FREQUENCY (GHz)
Isolation When VH is Connected to OP2*
1.8
2.2
2.6
3
Isolation When HH is Connected to OP2*
0
0
HH to OP2 (state 14)
HL to OP2 (state 6)
VL to OP2 (state 2)
VL to OP2 (state 6)
HH to OP2 (state 6)
HL to OP2 (state 10)
-20
-30
-40
-50
12
HL to OP2 (state 12)
HL to OP2 (state 16)
VH to OP2 (state 8)
VH to OP2 (state 16)
VL to OP2 (state 16)
VL to OP2 (state 4)
-10
ISOLATION (dB)
-10
ISOLATION (dB)
1.4
FREQUENCY (GHz)
-20
-30
-40
-50
-60
0.2
0.6
1
1.4
1.8
2.2
2.6
-60
0.2
3
FREQUENCY (GHz)
0.6
1
1.4
1.8
2.2
2.6
3
FREQUENCY (GHz)
Output Third Order Intercept Point
Path
State
F1 & F2
Pout (dBm)
Intermod
Pout (dBm)
Intermodulation
Ratio (dBc)
Output
IP3 (dBm)
VL to OP1
1
-12
-91
79
27.5
VL to OP2
1
-12
-91
79
27.5
HL to OP1
11
-12
-92
80
28
27.5
HL to OP2
11
-12
-91
79
VH to OP1
6
-12
-90
78
27
VH to OP2
6
-12
-90
78
27
HH to OP1
16
-12
-91
79
27.5
HH to OP2
16
-12
-91
79
27.5
Test Conditions
Temperature = +25° C
F1 = 2150 (MHz): -12 dBm at the Output
F2 = 2151 (MHz): -12 dBm at the Output
SWITCHES - MATRIX - SMT
ISOLATION (dB)
-10
Vdd = +5V
VCTL Low = 0V, High = +5V
* Isolation is recorded above insertion loss & measured at output of switch.
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 117
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Truth Table
Output
to Input State
Control Input
SWITCHES - MATRIX - SMT
12
12 - 118
RF Path State
State
HV 1
Tone 1
HV 2
Tone 2
OP1
OP2
VL to
OP1
HL to
OP1
VH to
OP1
HH to
OP1
VL to
OP2
HL to
OP2
VH to
OP2
HH to
OP2
1
0
0
0
0
VL
VL
LOSS
ISOL
ISOL
ISOL
LOSS
ISOL
ISOL
ISOL
2
0
0
0
1
VL
VH
LOSS
ISOL
ISOL
ISOL
ISOL
ISOL
LOSS
ISOL
3
0
0
1
0
VL
HL
LOSS
ISOL
ISOL
ISOL
ISOL
LOSS
ISOL
ISOL
4
0
0
1
1
VL
HH
LOSS
ISOL
ISOL
ISOL
ISOL
ISOL
ISOL
LOSS
5
0
1
0
0
VH
VL
ISOL
ISOL
LOSS
ISOL
LOSS
ISOL
ISOL
ISOL
6
0
1
0
1
VH
VH
ISOL
ISOL
LOSS
ISOL
ISOL
ISOL
LOSS
ISOL
7
0
1
1
0
VH
HL
ISOL
ISOL
LOSS
ISOL
ISOL
LOSS
ISOL
ISOL
8
0
1
1
1
VH
HH
ISOL
ISOL
LOSS
ISOL
ISOL
ISOL
ISOL
LOSS
ISOL
9
1
0
0
0
HL
VL
ISOL
LOSS
ISOL
ISOL
LOSS
ISOL
ISOL
10
1
0
0
1
HL
VH
ISOL
LOSS
ISOL
ISOL
ISOL
ISOL
LOSS
ISOL
11
1
0
1
0
HL
HL
ISOL
LOSS
ISOL
ISOL
ISOL
LOSS
ISOL
ISOL
12
1
0
1
1
HL
HH
ISOL
LOSS
ISOL
ISOL
ISOL
ISOL
ISOL
LOSS
13
1
1
0
0
HH
VL
ISOL
ISOL
ISOL
LOSS
LOSS
ISOL
ISOL
ISOL
14
1
1
0
1
HH
VH
ISOL
ISOL
ISOL
LOSS
ISOL
ISOL
LOSS
ISOL
15
1
1
1
0
HH
HL
ISOL
ISOL
ISOL
LOSS
ISOL
LOSS
ISOL
ISOL
16
1
1
1
1
HH
HH
ISOL
ISOL
ISOL
LOSS
ISOL
ISOL
ISOL
LOSS
Control Voltages
Bias Voltage
HV1, Tone1, HV2, Tone2
Vdd Range = +5.0 Vdc ± 10 %
State
Bias Condition
Low (0)
High (1)
0 to 0.8 Vdc @ 0.5 μA Typical
Vdd
(Vdc)
Idd (Typ.)
(mA)
Idd (Max.)
(mA)
+2.0 to +5.0 Vdc @ 0.5 μA Typical
+5.0
0.2
0.4
DC Blocking And Decoupling Capacitors
The HMC596LP4(E) requires DC blocks on all 6 RF ports (OP1, OP2, VL, HL, VH, HH). Characterization on the
HMC596LP4(E) was done using 0402 size 330pF capacitors on all RF ports. A 1,000 pF DC decoupling capacitor
(0603 size) is recommended for the Vdd pin.
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Absolute Maximum Ratings
Bias Voltage Range (Vdd)
+8.0 Vdc
Control Voltage Range
(All Logic Lines)
Vdd +0.5 to -0.2V Vdc
Channel Temperature
150 °C
Thermal Resistance
325 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Maximum Input Power (Each Input)
+23 dBm (200 - 2150 MHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.05mm MAX.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL NC LEADS, GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC596LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC596LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
SWITCHES - MATRIX - SMT
12
Package Marking [3]
[1]
H596
XXXX
[2]
H596
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 119
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Pin Descriptions
Pin Number
Function
Description
1, 2, 4 - 6, 13 - 15,
17, 18
GND
Package bottom has exposed metal paddle
that must be connected to PCB RF ground.
3, 16, 19, 24
HL, VL, VH, HH
Switch RF Input. This pin is DC coupled and should be DC
blocked externally using a series capacitor. Select value
based on lowest frequency of operation.
7, 12
OP1, OP2
Switch RF Input. This pin is DC coupled and should be DC
blocked externally using a series capacitor. Select value
based on lowest frequency of operation.
8
HV2
9
TONE2
10
TONE1
11
HV1
20, 22, 23
N/C
Not connected.
21
Vdd
Supply Voltage
Interface Schematic
Control Inputs. See truth and control voltage table.
SWITCHES - MATRIX - SMT
12
Switch Application Circuit for 4x4 Switch Matrix
The HMC596LP4(E) switch can operate as a 4x4 switch by
connecting the 4 inputs of two switches directly together.
The VL, VH, HL, and HH inputs of the first switch should be
connected to the second switch, as illustrated.
Mirror image switch performance can be realized by inverting the HV1 & HV2 logic control signals of one of the
HMC596LP4(E) switches.
The input loading impedance of two switches in parallel
should be 31.25 ohms. The output loading impedance on
each output should be 75 ohms. The interconnect RF line
between the switch’s inputs should be an RF trace with a
characteristic impedance of 62.5 ohms. This will allow the
switch to remain matched in all possible switch states.
The HMC596LP4(E) does not provide output to output (OP1
to OP2) isolation. For this reason, it is recommended that
external amplifiers should be used at each output. The
amplifier’s reverse isolation will provide output to output isolation, if this is necessary.
Each HMC596LP4(E) requires DC blocking capacitors on ALL RF input and output ports.
12 - 120
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC596LP4 / 596LP4E
v01.0409
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Evaluation PCB
The circuit board used in the final application should be generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed paddle
should be connected directly to the ground plane similar to that shown above. A generous number of ground vias
should be used to interconnect top/bottom ground planes. The evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
List of Materials for Evaluation PCB 104130 [1]
Multi Pin DC Interface (J1)
Item
Description
J2 - J9
PCB Mount SMA RF Connector
1
Vdd
J1
DC Connector
2
Tone 1
C1 - C8
330 pF Capacitor, 0402 Pkg.
3
GND
C9
1,000 pF Capacitor, 0603 Pkg.
4
Tone 2
U1
HMC596LP4 / HMC596LP4E
4x2 Switch Matrix
5
GND
6
HV1
PCB [2]
104113 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Pin
Line
7
N/C
8
N/C
9
HV2
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
SWITCHES - MATRIX - SMT
12
12 - 121
工商网监
湘ICP备2023018690号
