HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
POWER DETECTORS - SMT
7
Typical Applications
Features
The HMC612LP4(E) is ideal for IF and RF applications in:
Wide Input Bandwidth: 50 Hz to 3 GHz
• Cellular/PCS/3G
High Accuracy: ±1 dB with 60 dB Range Up to 0.9 GHz
• WiMAX, WiBro, WLAN, Fixed Wireless & Radar
Supply Voltage: +2.7V to +5.5V
• Power Monitoring & Control Circuitry
Excellent Stability over Temperature
• Receiver Signal Strength Indication (RSSI)
Power-Down Mode
• Automatic Gain & Power Control
Compact 4x4mm Leadless SMT Package
Functional Diagram
General Description
Wide Dynamic Range: Up to 74 dB
The HMC612LP4(E) Logarithmic Detector/Controller is
ideal for converting input signals with frequencies in the
50 Hz to 3 GHz range, to a proportional DC voltage at
its output. The HMC612LP4(E) employs a successive
compression technology which delivers extremely high
dynamic range and conversion accuracy over a wide
input frequency range. As the input signal is increased,
successive amplifiers move into saturation one by one
creating an accurate approximation of the logarithm
function. The output of a series of square law detectors
is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode,
the LOGOUT pin is shorted to the VSET input and will
provide a nominal logarithmic slope of 19 mV/dB and an
intercept of -99 dBm. The HMC612LP4(E) can also be
used in the controller mode where an external voltage
is applied to the VSET pin, to create an AGC or APC
feedback loop.
Electrical Specifi cations, TA = +25C[1]
Parameter
Input Frequency
±3 dB Dynamic Range
Typ.
Typ.
0.00005 0.0001
75
75
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
0.001
0.01
75
75
0.1
1
10
100
900
1900
2500
3000
MHz
74
74
74
74
72
64
60
55
dB
-30
-30
-30
-31
-33
-34
-34
dBm
68
66
66
64
55
52
45
dB
±3 dB Dynamic Range Center
±3 dB Dynamic Range Center
-45
-44.5
-45.5
-45
-45
±1 dB Dynamic Range
68
67
68
67
65
19.7
19.7
19.6
19.6
19.8
Output Slope
Output Intercept
Output Intercept
-110
-110.2
-110.6
-110.6 -110.0
Temperature
Sensitivity @ -43 dBV Input [2]
-9.9
-11.9
-11.3
-11.3
Temperature
Sensitivity @ -30 dBm Input [2]
dBV
19.7
19.8
19.8
19.4
19.4
19.8
20.8
mV/dB
-94.5
-93.9
-93.8
-94.8
-92.5
-91.3
-86.4
dBm
dBV
-11.3
mdBV/°C
-12.5
-12.2
-11.7
-11.2
-11.7
-12.1
-13.4
mdBm/°C
[1] Detector mode measurements; LOGOUT (Pin 17) is shorted to VSET (Pin 18).
[2] Measured from TA = -45C to TA = +85C, Vdd1, Vdd2 = 5V
7 - 60
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Electrical Specifi cations, (continued)
Parameter
Conditions
Min.
Typ.
Max.
Units
LOGOUT Interface
Output Voltage Range
0
Output Rise Time/Fall Time @ -15 dBm
Vcc - 0.15
From 0% to 90%
V
19/100
ns
30
kΩ
0.6 to 1.9
V
VSET Interface
Input Impedance
Input Voltage Range
7
Voltage Range for Normal Mode
Voltage Range for Powerdown Mode
0
0.2 x Vcc
V
0.8 x Vcc
Vcc
V
Threshold Voltage
Vcc /2
POWER DETECTORS - SMT
Power Down (EN) Interface
V
Power Supply (Vcc1, Vcc2)
Operating Voltage Range
2.7
5.5
V
Supply Current in Normal Mode
30
mA
Supply Current in Power Down Mode
1
mA
[1] Vdd1 = Vdd2 = 5V
Test Conditions
Parameter
Vdd1 = Vdd2
Condition
+5V
Input Zo - w/ 68 Ω Term Resistor at IN+
50 Ω
TA
Fin
+25 C
900 MHz
IN - Port connected to ground through a 10 μF capacitor
LOGOUT Voltage & Error
vs. Input Signal, Fin = 50 Hz
LOGOUT Voltage & Error
vs. Input Signal, Fin = 100 Hz
2
2.2
1.8
1
1.8
1
1.4
0
1.4
0
ERR (+25c)
ERR (+85c)
ERR (-45c)
-1
1
Ideal
Logout (+25c)
Logout (+85c)
Logout (-45c)
0.6
0.2
-90
-80
-70
-60
-50
-40
-30
-20
-10
0.6
-3
0.2
dBV
ERR (+25c)
ERR (+85c)
ERR (-45c)
2
-1
1
-2
0
3
-90
Ideal
Logout (+25c)
Logout (+85c)
Logout (-45c)
ERROR (dB)
LOGOUT (V)
2.2
LOGOUT (V)
2.6
ERROR (dB)
3
2.6
-2
-3
-80
-70
-60
-50
-40
-30
-20
-10
0
dBV
Vdd1 = Vdd2 = 5V
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
7 - 61
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
LOGOUT Voltage & Error
vs. Input Signal, Fin = 1 kHz
LOGOUT Voltage & Error
vs. Input Signal, Fin = 100 kHz
2
2.2
1.8
1
1.8
1
1.4
0
1.4
0
ERR (+25c)
ERR (+85c)
ERR (-45c)
-1
1
Ideal
Logout (+25c)
Logout (+85c)
Logout (-45c)
0.2
-90
-80
-70
-60
-50
-40
-30
-20
-10
0.6
-3
0.2
0
ERR (+25c)
ERR (+85c)
ERR (-45c)
-1
-90
Ideal
Logout (+25c)
Logout (+85c)
Logout (-45c)
-70
-60
-50
-40
-30
-20
-10
0
dBV
LOGOUT Voltage & Error
vs. Input Power, Fin = 1 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 10 MHz
2.6
2
2.2
1.8
1
1.8
1
1.4
0
1.4
0
ERR +25C
ERR +85C
ERR -45C
2.2
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
0.6
0.2
-70
-60
-50
-40
-30
-20
-10
0
ERR +25C
ERR +85C
ERR -45C
2
-1
1
-2
0.6
-3
0.2
10
3
-70
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
-2
-3
-60
-50
INPUT POWER (dBm)
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
LOGOUT Voltage & Error
vs. Input Power, Fin = 100 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 900 MHz
2
2.2
1.8
1
1.8
1
1.4
0
1.4
0
ERR +25C
ERR +85C
ERR -45C
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
0.6
0.2
-70
-60
-50
-40
-30
-20
-10
0
0.6
-3
0.2
INPUT POWER (dBm)
ERR +25C
ERR +85C
ERR -45C
2
-1
1
-2
10
3
-70
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
ERROR (dB)
-1
1
LOGOUT (V)
2.6
ERROR (dB)
3
2.6
2.2
ERROR (dB)
-1
1
LOGOUT (V)
3
2.6
LOGOUT (V)
-2
-3
-80
dBV
LOGOUT (V)
2
1
-2
ERROR (dB)
POWER DETECTORS - SMT
0.6
3
ERROR (dB)
7
LOGOUT (V)
2.2
LOGOUT (V)
2.6
ERROR (dB)
3
2.6
-2
-3
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Vdd1 = Vdd2 = 5V
7 - 62
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 2500 MHz
2.2
1.8
1
1.8
1
1.4
0
1.4
0
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
0.6
0.2
-70
-60
-50
-40
-30
-20
-10
0
ERR +25C
ERR +85C
ERR -45C
-1
1
-2
0.6
-3
0.2
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
-60
LOGOUT Voltage & Error
vs. Input Power, Fin = 3000 MHz
2
23
1
1.4
0
-1
1
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -45C
0.2
-60
-50
-40
-30
-20
-10
0
ERROR (dB)
LOGOUT (V)
24
SLOPE (mV/dB)
ERR +25C
ERR +85C
ERR -45C
3
1.8
-70
-10
0
10
22
21
20
-2
19
-3
18
0
10
500
1000
1500
2000
2500
3000
2500
3000
FREQUENCY (MHz)
LOGOUT Slope
vs. Supply Voltage, TA= +25C
LOGOUT Intercept
vs. Frequency, Vcc= 3.3V
25
-70
1MHz
10MHz
100MHz
900MHz
23
-75
1900MHz
2500Hz
3000MHz
INTERCEPT (dBm)
24
SLOPE (mV/dB)
-20
+25C
+85C
-45C
INPUT POWER (dBm)
22
21
20
19
2.5
-30
LOGOUT Slope vs. Frequency, Vcc= 3.3V
2.6
0.6
-40
INPUT POWER (dBm)
INPUT POWER (dBm)
2.2
-50
7
-2
-3
-70
10
2
ERROR (dB)
-1
1
LOGOUT (V)
2
ERR +25C
ERR +85C
ERR -45C
ERROR (dB)
2.6
2.2
LOGOUT (V)
3
3
2.6
POWER DETECTORS - SMT
LOGOUT Voltage & Error
vs. Input Power, Fin = 1900 MHz
+25C
+85C
-45C
-80
-85
-90
-95
-100
3
3.5
4
4.5
5
5.5
Vcc (Volts)
0
500
1000
1500
2000
FREQUENCY (MHz)
Vdd1 = Vdd2 = 5V
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
7 - 63
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
LOGOUT Intercept
vs. Supply Voltage, TA= +25C
LOGOUT Error vs. Input Power,
Normalized, Fin= 100 MHz [1]
-50
7
INTERCEPT (dBm)
-60
1MHz
10MHz
100MHz
900MHz
-70
RELATIVE ERROR TO 25°C (dB)
2
1900MHz
2500Hz
3000MHz
-80
-90
-110
2.5
3
3.5
4
4.5
5
1
0.5
0
-0.5
-1
+85 C
-45 C
-1.5
-2
-70
5.5
-60
-50
-40
Vcc (Volts)
-30
-20
-10
0
10
INPUT POWER (dBm)
LOGOUT Voltage
vs. Input Power & Frequency
Input Return Loss
vs. Frequency, Vcc= 3.3V
0
2.4
2.2
-5
2
1.8
-10
LOGOUT (V)
INPUT RETURN LOSS (dB)
POWER DETECTORS - SMT
-100
1.5
-15
-20
1.6
1.4
1.2
1 MHz
10 MHz
100 MHz
900 MHz
1900MHz
2500MHz
3000MHz
1
0.8
-25
0.6
+25 C
+85 C
-45 C
-30
0.4
0.2
-35
0
1
2
3
4
0
-70
5
-60
-50
-40
FREQUENCY (GHz)
Fall Time @ 600 MHz Over Power Level
-20
-10
0
10
Fall Time @ 2400 MHz Over Power Level [2]
2
2
0dBm
-5dBm
-10dBm
-15dBm
1.6
0dBm
-5dBm
-10dBm
-15dBm
1.8
LOGOUT (Volts)
1.8
LOGOUT (Volts)
-30
INPUT POWER (dBm)
1.4
1.2
1.6
1.4
1.2
1
1
0.8
0.8
0.6
0.6
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
TIME (us)
4
5
6
7
8
9
10
TIME (us)
[1] This data is relative to the room temperature performance of the HMC612LP4(E)
[2] Intermediate step up to 4 μs on falling-edge when operated beyond linear dynamic range.
7 - 64
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Absolute Maximum Ratings
0V to +5.5V
PWD
0V to +5.5V
VSET Input Voltage
0V to +5.5V
LOGOUT Output Current
3 mA
RF Input Power
+10 dBm
Junction Temperature
125 °C
Continuous Pdiss (T = 85°C)
(Derate 7.95 mW/°C above 85°C)
0.32 Watts
Thermal Resistance (Rth)
(junction to package base)
126 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-45 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
7
POWER DETECTORS - SMT
Vcc1, Vcc2
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC612LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC612LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H612
XXXX
[2]
H612
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
7 - 65
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Pin Descriptions
Pin Number
POWER DETECTORS - SMT
7
7 - 66
Function
Description
1, 6, 7 - 12,
15, 18 - 21
N/C
These pins are not connected internally; however, this
product is specified with these pins connected to RF/DC
ground.
2, 5
Vcc1, Vcc2
Bias supply. Connect supply voltage to both pins.
3, 4
INP, INN
RF Input pins. Connect RF to INP, and AC couple
INN to ground for single-ended operation.
13
CLPF
Loop filter capacitor for output ripple filtering.
14
PWD
Connect to 0V for normal operation. Applying voltage
>0.8 x Vcc will initiate a power saving shutdown mode.
Interface Schematic
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Pin Descriptions
Function
Description
16
VSET
VSET input in controller mode. Short this
pin to LOGOUT for detector mode.
17
LOGOUT
Logarithmic output that converts the input power
to a DC level in detector mode. Short this pin to
VSET for detector mode.
22, 23
COFSB,
COFSA
External capacitor should be connected to these pins to
reduce system high pass corner frequency for RF signal
detection. Large capacitor is required for detecting low
frequency signals.
Package
Base
GND
Exposed paddle must be connected to RF and DC ground.
Interface Schematic
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
7
POWER DETECTORS - SMT
Pin Number
7 - 67
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Evaluation PCB
POWER DETECTORS - SMT
7
List of Materials for Evaluation PCB 118980 [1]
Item
Description
J1 - J4
PC Mount SMA Connector
J5 - J8
DC Pin
C1, C2
10 μF Capacitor, 0603 Pkg.
C3, C4
0.1 μF Capacitor, 0402 Pkg.
C5, C6, C7
47 μF Capacitor, 0805 Pkg.
R1, R2
6.8Ω Resistor, 0603 Pkg.
R3, R4, R5
0Ω Resistor, 0603 Pkg.
R6
49.9Ω Resistor, 0402 Pkg.
U1
HMC612LP4 / HMC612LP4E
Logarithmic Detector / Controller
PCB [2]
118978 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7 - 68
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC612LP4 / 612LP4E
v01.0108
75 dB LOGARITHMIC
DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
Application & Evaluation PCB Schematic
POWER DETECTORS - SMT
7
Notes
Note 1: The HMC612LP4 & HMC612LP4E evaluation boards are pre-assembled for single-ended input, and detector/RSSI mode.
Note 2: For detector mode, connect high impedance volt meter to the LOGOUT port. VSET is shorted to LOGOUT by R3, as
required for detector mode.
Note 3: For low frequency operation remove R6.
Note 4: Faster rise/fall time remove C6, C7 and C5
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
7 - 69
工商网监
湘ICP备2023018690号
