HMC637
v03.0709
Features
The HMC637 is ideal for:
P1dB Output Power: +29 dBm
• Telecom Infrastructure
Gain: 14 dB
• Microwave Radio & VSAT
Output IP3: +41 dBm
• Military & Space
Bias Supplies: +12V, +6V, -1V
• Test Instrumentation
50 Ohm Matched Input/Output
• Fiber Optics
Die Size: 2.98 x 2.48 x 0.1 mm
Functional Diagram
General Description
TE
Typical Applications
LE
The HMC637 is a GaAs MMIC MESFET Distributed
Power Amplifier die which operates between DC and
6 GHz. The amplifier provides 14 dB of gain,
+41 dBm output IP3 and +29 dBm of output power
at 1 dB gain compression while requiring 400mA
from a +12V supply. Gain flatness is excellent at ±0.5
dB from DC to 6 GHz making the HMC637 ideal for
EW, ECM, Radar and test equipment applications.
B
SO
The HMC637 amplifier I/Os are internally matched
to 50 Ohms facilitating integration into Mutli-ChipModules (MCMs). All data is taken with the chip
connected via two 0.025mm (1 mil) wire bonds of
minimal length 0.31 mm (12 mils).
Electrical Specifications, TA = +25° C, Vdd= +12V, Vgg2= +6V, Idd= 400mA*
O
Amplifiers - Linear & Power - Chip
3
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Parameter
Min.
Frequency Range
Gain
Gain Flatness
Gain Variation Over Temperature
Typ.
DC - 6
11
Max.
Units
GHz
14
dB
±0.5
dB
±2
dB/ °C
dB
Input Return Loss
13
Output Return Loss
18
dB
Output Power for 1 dB Compression (P1dB)
29
dBm
Saturated Output Power (Psat)
30
dBm
Output Third Order Intercept (IP3)
41
dBm
Noise Figure
5
dB
400
mA
Supply Current (Idd)
* Adjust Vgg1 between -2V to 0V to achieve Idd= 400mA typical.
3-1
Information
furnisheddelivery
by Analog Devices
believed orders:
to be accurate
and reliable.
However, Corporation,
no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
and tois place
Hittite
Microwave
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
18
16
14
3
12
-10
10
8
6
TE
+25C
+85C
-55C
4
-20
2
-30
0
0
2
4
6
8
0
4
0
8
Output Return Loss vs. Temperature
0
-5
-15
B
SO
-10
+25C
+85C
-55C
-20
-25
-30
0
2
4
6
RETURN LOSS (dB)
-5
-15
-20
-25
-30
8
0
2
4
0
8
6
8
12
NOISE FIGURE (dB)
-10
-20
6
FREQUENCY (GHz)
Noise Figure vs. Temperature
Reverse Isolation vs. Temperature
O
+25C
+85C
-55C
-10
FREQUENCY (GHz)
ISOLATION (dB)
6
FREQUENCY (GHz)
Input Return Loss vs. Temperature
RETURN LOSS (dB)
2
LE
FREQUENCY (GHz)
+25C
+85C
-55C
-30
-40
Amplifiers - Linear & Power - Chip
S21
S11
S22
0
GAIN (dB)
RESPONSE (dB)
10
+25C
+85C
-55C
9
6
3
-50
-60
0
0
2
4
FREQUENCY (GHz)
6
8
0
2
4
FREQUENCY (GHz)
Information
furnished
by Analog and
Devices
believedorders:
to be accurate
and Microwave
reliable. However,Corporation,
no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
toisplace
Hittite
Alpha
Road,
Chelmsford,
MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order
On-line at www.hittite.com
Phone:
781-329-4700
•
Order
online
at
www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
Trademarks and registered trademarks are
the property of their
respective owners.
3-2
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Psat vs. Temperature
32
30
30
28
28
Psat (dBm)
32
26
+25C
+85C
-55C
26
+25C
+85C
-55C
24
TE
24
22
22
20
20
2
4
6
8
0
FREQUENCY (GHz)
55
50
B
SO
45
30
+25C
+85C
-55C
25
20
0
2
6
8
LE
60
35
4
Gain, Power & Output IP3 vs.
Supply Voltage @ 3 GHz, Fixed Vgg
Output IP3 vs. Temperature
40
2
FREQUENCY (GHz)
4
6
8
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
0
IP3 (dBm)
45
40
35
30
25
Gain
P1dB
Psat
IP3
20
15
10
11.5
12
FREQUENCY (GHz)
12.5
Vdd (V)
Output IP3 vs. Output Tone Power
O
60
55
0 dBm
10 dBm
20 dBm
50
IP3 (dBm)
Amplifiers - Linear & Power - Chip
3
P1dB (dBm)
P1dB vs. Temperature
45
40
35
30
25
20
0
2
4
6
8
FREQUENCY (GHz)
3-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC637
v03.0709
Typical Supply Current vs. Vdd
+14 Vdc
Gate Bias Voltage (Vgg1)
-3 to 0 Vdc
Vdd (V)
Idd (mA)
11.5
375
Gate Bias Voltage (Vgg2)
+4 to +7V
12.0
400
RF Input Power (RFIN)(Vdd = +12V Vdc)
+25 dBm
12.5
430
Channel Temperature
150 °C
Continuous Pdiss (T= 85 °C)
(derate 106 mW/°C above 85 °C)
6.9 W
Thermal Resistance
(channel to die bottom)
9.4 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
O
B
SO
LE
TE
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information
furnisheddelivery
by Analog Devices
believed orders:
to be accurate
and reliable.
However, Corporation,
no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
and tois place
Hittite
Microwave
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3
Amplifiers - Linear & Power - Chip
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
3-4
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Outline Drawing
TE
LE
B
SO
O
Amplifiers - Linear & Power - Chip
3
Die Packaging Information
[1]
Standard
Alternate
GP-1 (Gel Pack)
[2]
[1] Refer to the “Packaging Information” section for die
packaging dimensions.
[2] For alternate packaging information contact Hittite
Microwave Corporation.
3-5
NOTES:
1. ALL DIMENSIONS IN INCHES [MILLIMETERS]
2. DIE THICKNESS IS 0.004 (0.100)
3. TYPICAL BOND PAD IS 0.004 (0.100) SQUARE
4. BOND PAD METALIZATION: GOLD
5. BACKSIDE METALLIZATION: GOLD
6. BACKSIDE METAL IS GROUND
7. NO CONNECTION REQUIRED FOR UNLABELED BOND PADS
8. OVERALL DIE SIZE IS ±.002
Information
furnisheddelivery
by Analog Devices
believed orders:
to be accurate
and reliable.
However, Corporation,
no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
and tois place
Hittite
Microwave
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Pad Descriptions
Description
1
IN
This pad is DC coupled and matched
to 50 Ohms. Blocking capacitor is required.
2
Vgg2
Gate control 2 for amplifier. Attach bypass
capacitors per application circuit herein. For nominal
operation +6V should be applied to Vgg2.
3
ACG1
Low frequency termination. Attach bypass
capacitor per application circuit herein.
4
ACG2
Low frequency termination. Attach bypass
capacitor per application circuit herein.
5
OUT & Vdd
RF output for amplifier. Connect DC bias (Vdd) network to
provide drain current (Idd). See application circuit herein.
6, 7
ACG3, ACG4
Low frequency termination. Attach bypass
capacitor per application circuit herein.
Vgg1
Gate control 1 for amplifier. Attach bypass
capacitors per application circuit herein. Please
follow “MMIC Amplifier Biasing Procedure”
application note.
GND
Die bottom must be connected to RF/DC ground.
LE
B
SO
8
Interface Schematic
O
Die Bottom
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to placeChelmsford,
orders: AnalogMA
Devices,
For price,
delivery
toforplace
orders:
Hittite Microwave
Corporation,
20 Alpha
01824Inc.,
responsibility
is assumed
by Analogand
Devices
its use, nor
for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone:
978-250-3343
Fax:rights
978-250-3373
Order781-329-4700
On-line at www.hittite.com
Phone:
• Order online at www.analog.com
license is granted by implication
or otherwise
under any patent or patent
of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks areApplication
the property of their
respective owners.
Support:
Phone: 978-250-3343
or apps@hittite.com
3
Amplifiers - Linear & Power - Chip
Function
TE
Pad Number
3-6
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Application Circuit
3-7
TE
LE
B
SO
NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee
with low series resistance and capable of providing 500mA
Assembly Diagram
O
Amplifiers - Linear & Power - Chip
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order 781-329-4700
On-line at www.hittite.com
Phone:
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC637
v03.0709
GaAs MESFET MMIC 1 WATT
POWER AMPLIFIER, DC - 6 GHz
Mounting & Bonding Techniques for Millimeterwave GaAs MMICs
Wire Bond
0.076mm
(0.003”)
TE
50 Ohm Microstrip transmission lines on 0.127mm (5 mil) thick alumina
thin film substrates are recommended for bringing RF to and from the chip
(Figure 1). If 0.254mm (10 mil) thick alumina thin film substrates must be
used, the die should be raised 0.150mm (6 mils) so that the surface of
the die is coplanar with the surface of the substrate. One way to accomplish this is to attach the 0.102mm (4 mil) thick die to a 0.150mm (6 mil)
thick molybdenum heat spreader (moly-tab) which is then attached to the
ground plane (Figure 2).
0.102mm (0.004”) Thick GaAs MMIC
RF Ground Plane
Microstrip substrates should be placed as close to the die as possible in
order to minimize bond wire length. Typical die-to-substrate spacing is
0.076mm to 0.152 mm (3 to 6 mils).
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag for shipment.
Once the sealed ESD protective bag has been opened, all die should be
stored in a dry nitrogen environment.
B
SO
Cleanliness: Handle the chips in a clean environment. DO NOT attempt
to clean the chip using liquid cleaning systems.
Static Sensitivity:
strikes.
Figure 1.
LE
Handling Precautions
0.127mm (0.005”) Thick Alumina
Thin Film Substrate
0.102mm (0.004”) Thick GaAs MMIC
Wire Bond
0.076mm
(0.003”)
RF Ground Plane
Follow ESD precautions to protect against ESD
Transients: Suppress instrument and bias supply transients while bias is
applied. Use shielded signal and bias cables to minimize inductive pickup.
0.150mm (0.005”) Thick
Moly Tab
0.254mm (0.010”) Thick Alumina
Thin Film Substrate
Figure 2.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The
surface of the chip may have fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
O
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy.
The mounting surface should be clean and flat.
Eutectic Die Attach: A 80/20 gold tin preform is recommended with a work surface temperature of 255 °C and a tool
temperature of 265 °C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be 290 °C. DO
NOT expose the chip to a temperature greater than 320 °C for more than 20 seconds. No more than 3 seconds of
scrubbing should be required for attachment.
3
Amplifiers - Linear & Power - Chip
The die should be attached directly to the ground plane eutectically or with
conductive epoxy (see HMC general Handling, Mounting, Bonding Note).
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed
around the perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
RF bonds made with two 1 mil wires are recommended. These bonds should be thermosonically bonded with a force
of 40-60 grams. DC bonds of 0.001” (0.025 mm) diameter, thermosonically bonded, are recommended. Ball bonds
should be made with a force of 40-50 grams and wedge bonds at 18-22 grams. All bonds should be made with a
nominal stage temperature of 150 °C. A minimum amount of ultrasonic energy should be applied to achieve reliable
bonds. All bonds should be as short as possible, less than 12 mils (0.31 mm).
Information
furnished
by Analog and
Devices
believedorders:
to be accurate
and reliable.
However, Corporation,
no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
toisplace
Hittite
Microwave
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order
On-line at www.hittite.com
Phone: 781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-8
工商网监
湘ICP备2023018690号
