HMC6380LC4BTR-R5

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC6380LC4B v02.0915 WIDEBAND VCOs - SMT WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz Typical Applications Features Low Noise wideband MMIC VCO is ideal for: Wide Tuning Bandwidth • Industrial/Medical Equipment Pout: +6 dBm • Test & Measurement Equipment Low SSB Phase Noise: -92 dBc/Hz @100 kHz • Satcom No External Resonator Needed • Military Radar, EW, & ECM Single Positive Supply: +5V @ 75 mA Ceramic Leadless SMT Package: 16 mm² Functional Diagram General Description The HMC6380LC4B is a wideband MMIC Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscillator’s monolithic construction. The Vtune port accepts an analog tuning voltage from 0 to +23V. The HMC6380LC4B VCO operates from a single +5V supply, consumes only 75 mA of current, and is housed in a RoHS compliant SMT package. This wideband VCO uniquely combines the attributes of ultra small size, low phase noise, low power consumption, and wide tuning range. Electrical Specifications, TA = +40 °C to + 85 °C, Vcc = +5V Parameter Min. Frequency Range Power Output Typ. 2 Units 6 9 dBm GHz SSB Phase Noise @ 10 kHz Offset -64 -50 dBc/Hz SSB Phase Noise @ 100 kHz Offset -92 -85 dBc/Hz SSB Phase Noise @ 1 MHz Offset -120 -110 dBc/Hz 75 85 mA Supply Current (Icc) (Vcc = +5V) Tune Voltage (Vtune) 0 Tune Port Leakage Current (Vtune = +23V) Tuning Sensitivity 3 Max. 8.0 - 16.0 200 450 23 V 100 µA 600 MHz/V Output Return Loss 10 dB 2nd Harmonic -11 dBc 3rd Harmonic -25 dBc Pulling (into a 2.0:1 VSWR) 28 MHz pp Vcc Pushing, Frequency = 16 GHz 55 MHz/V Frequency Drift Rate 0.5 MHz/°C For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC6380LC4B v02.0915 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz 18 10 17 9 16 8 OUTPUT POWER (dBm) OUTPUT FREQUENCY (GHz) Output Power vs. Tuning Voltage 15 14 13 12 11 10 9 7 6 5 4 3 2 1 8 0 7 0 2 4 6 8 10 12 14 16 18 20 22 0 2 6 +25C +85C 10 12 +25C -40C Sensitivity vs. Tuning Voltage 8 14 16 18 20 22 TUNING VOLTAGE (Vdc) +85C -40C Supply Current 600 85 83 500 81 79 Icc (mA) 400 300 200 77 75 73 71 69 100 67 0 0 2 4 6 8 10 12 14 16 18 20 65 22 0 2 TUNING VOLTAGE (Vdc) +25C +85C -40C 6 8 + 25C 10 12 14 16 18 20 22 + 85C - 40C Typical SSB Phase Noise @ Vtune = +10V -10 -40 -20 -50 SSB PHASE NOISE (dBc/Hz) SSB PHASE NOISE (dBc/Hz) 4 TUNING VOLTAGE (Vdc) SSB Phase Noise vs. Tuning Voltage -60 -70 -80 -90 -100 -30 -40 -50 -60 -70 -80 -90 -100 -110 -110 -120 -120 -130 -130 0 2 4 6 8 10 12 14 16 18 20 22 TUNING VOLTAGE (Vdc) +25C 10kHz +25C 100kHz +25C 1MHz 4 4 TUNING VOLTAGE (Vdc) TUNING SENSITIVITY (MHz/VOLT) WIDEBAND VCOs - SMT Frequency vs. Tuning Voltage, Vcc = +5V +85C 10kHz +85C 100kHz +85C 1MHz -40C 10kHz -40C 100kHz -40C 1MHz 10 3 10 4 10 5 10 6 OFFSET FREQUENCY (Hz) + 25C + 85C - 40C For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC6380LC4B v02.0915 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz WIDEBAND VCOs - SMT Typical Supply Current vs. Vcc, +25C Vcc (V) Icc (mA) 4.75 5.0 5.25 Absolute Maximum Ratings Vcc +5.5 V 69 Vtune -1 to +25V 75 Storage Temperature -65 °C to +150 °C 79 ESD Sensitivity (HBM) Class 1A ESD Sensitivity (FICDM) Class C3 Reliability Information Junction Temperature To Maintain 1 Million Hour MTTF 135 °C Nominal Junction Temperature (T = 85 °C) 119 °C Thermal Resistance (Junction to GND paddle, 5V supply) 97 °C/W Operating Temperature -40 °C to + 85 °C Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM, NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC6380LC4B RoHS-compliant Ceramic SMT Package Gold Flash Over Nickel MSL Rating MSL3 [1] Package Marking [2] H6380 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC6380LC4B v02.0915 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz WIDEBAND VCOs - SMT Pin Descriptions 6 Pin Number Function Description 1 - 3, 5 - 11, 13, 17 - 24 N/C No internal connection. These pins may be connected to RF/DC ground. Performance will not be affected. 4 Vtune Control voltage and modulation Input. Modulation bandwidth dependent on drive source impedance. . 12 Vcc Supply voltage, Vcc= +5V 15 RFOUT 14, 16 Paddle GND Interface Schematic RF output (AC coupled) Package bottom has an exposed metal paddle that must be connected to RF & DC ground. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC6380LC4B v02.0915 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz WIDEBAND VCOs - SMT Evaluation PCB List of Materials for Evaluation PCB 108648-HMC6380LC4B Item Description J1 RF Connector, SMA J2 RF Connector, SMA J3 DC Header C1 1000 pF Capacitor, 0402 Pkg. C2 4.7 µF Capacitor, Tantalum U1 HMC6380LC4B PCB [2] 108646 Eval Board [1] Reference this number when ordering complete evaluation PCB [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Arlon 25FR or Rogers 4350 7 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC6380LC4B v02.0915 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz WIDEBAND VCOs - SMT Notes: 8 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D