HMC662LP3E
v05.0914
POWER DETECTORS - SMT
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
Typical Applications
Features
The HMC662LP3E is ideal for:
Wide Input Bandwidth: 8 to 30 GHz
• Point-to-Point Microwave Radio
Wide Dynamic Range: >54 dB up to 28 GHz
• VSAT
Single Positive Supply: +3.3V
• Wideband Power Monitoring
Excellent Stability Over Temperature
• Receiver Signal Strength Indication (RSSI)
Fast Rise/Fall Time: 5ns / 10ns
• Test & Measurement
16 Lead 3x3mm SMT Package: 9mm²
Functional Diagram
General Description
The HMC662LP3E Logarithmic Detector converts
RF signals at its input, to a proportional DC voltage
at its output. The HMC662LP3E employs successive
compression topology which delivers high dynamic
range over a wide input frequency range. As the input
power is increased, successive amplifiers move into
saturation one by one creating an approximation of
the logarithm function. The output of a series of
detectors is summed, converted into the voltage
domain and buffered to drive the LOG OUT output.
The HMC662LP3E provides a nominal logarithmic
slope of +13 mV/dB and an intercept of -127 dBm at
18 GHz. Ideal as a log detector for high volume microwave radio and VSAT applications, the HMC662LP3E
is housed in a compact 3x3 mm RoHS compliant SMT
plastic package.
Electrical Specifications, TA = +25 C Vcc1 = Vcc2 = +3.3V
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Input Frequency[1]
Parameter
10
14
18
22
28
GHz
±3 dB Dynamic Range
59
60
63
64
54
dB
±3 dB Dynamic Range Center
-23
-24
-24
-25
-17
dBm
Log Error Over Temperature (-40 to +85)
±1
±1
±1
±2
±3
dB
Output Intercept
-120
-125
-127
-130
-113
dBm
Output Slope
14.6
13.7
13.3
13.2
14
mV/dB
[1] Video output load should be 1K Ohm or higher.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
Electrical Specifications, (continued)
Conditions
Min.
Typ.
Max.
Units
Output Voltage Range
0.9
Output Rise Time [1] / Fall Time [2]
1.8
f = 10 GHz
V
5 / 10
ns
Power Down (EN) Interface
Voltage Range for Normal Mode
Voltage Range for Powerdown Mode
0.8 x Vcc
Vcc
V
0
0.1 x Vcc
V
Power Supply (Vcc1, Vcc2)
Operating Voltage Range
3.15
3.3
3.45
V
Supply Current in Normal Mode
88
mA
Supply Current in Power Down Mode
3
mA
[1] 0 dBm Input Pulsed; measured from 10% to 90%
[2] 0 dBm Input Pulsed; measured from 90% to 10%
LOG OUT & Error
vs. Input Power, Fin = 8 GHz
LOG OUT & Error
vs. Input Power, Fin = 10 GHz
3
2
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-40
-30
-20
-10
0
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-3
-50
1
1.5
-2
0.5
0
-60
-3
-50
-40
3
0
10
3
ERR +25C
ERR +85C
ERR -40C
1
1.5
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-3
-10
1
1.5
0
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-2
0.5
0
10
INPUT POWER (dBm)
2
-2
-3
0.5
-60
ERROR (dB)
0
LOG OUT (V)
2
-20
-10
2
ERROR (dB)
LOG OUT (V)
ERR +25C
ERR +85C
ERR -40C
-30
-20
LOG OUT & Error
vs. Input Power, Fin = 18 GHz
2
-40
-30
INPUT POWER (dBm)
LOG OUT & Error
vs. Input Power, Fin = 14 GHz
-50
-2
0.5
10
INPUT POWER (dBm)
-60
2
ERROR (dB)
0
LOG OUT (V)
1
1.5
-60
ERR +25C
ERR +85C
ERR -40C
2
ERROR (dB)
LOG OUT (V)
ERR +25C
ERR +85C
ERR -40C
3
2
POWER DETECTORS - SMT
Parameter
LOGOUT Interface
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
LOG OUT & Error
vs. Input Power, Fin = 20 GHz
LOG OUT & Error
vs. Input Power, Fin = 22 GHz
3
0
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
LOG OUT (V)
1
1.5
-40
-30
-20
-10
1
0
-1
1
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-3
-50
0
-3
-60
-50
-40
8
ERR +25C
ERR +85C
ERR -40C
-10
0
LOG OUT (V)
LOG OUT (V)
0.6
-20
10
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
4
0
1.4
-4
1
-8
0.6
-4
ERR +25C
ERR +85C
ERR -40C
-8
-60
10
ERROR (dB)
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
-30
0
8
1.8
ERROR (dB)
0
-40
-10
2.2
4
1.4
-50
-20
LOG OUT & Error
vs. Input Power, Fin = 28 GHz
2.2
-60
-30
INPUT POWER (dBm)
LOG OUT & Error
vs. Input Power, Fin = 24 GHz
1
-2
0.5
10
INPUT POWER (dBm)
1.8
2
1.5
-2
0.5
-60
ERR +25C
ERR +85C
ERR -40C
2
ERROR (dB)
LOG OUT (V)
ERR +25C
ERR +85C
ERR -40C
3
2
ERROR (dB)
POWER DETECTORS - SMT
2
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
LOG OUT & Error
vs. Input Power, Fin = 30 GHz
8
2.2
Ideal
Log Out +25C
Log Out +85C
Log Out -40C
4
0
1.4
1
ERR +25C
ERR +85C
ERR -40C
-4
-8
0.6
-60
ERROR (dB)
LOG OUT (V)
1.8
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25 °C
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
1.8
1.6
1.6
1.4
1.2
1
1.4
1.2
1
0.8
0.8
0
20
40
60
TIME (ns)
80
100
Input Return Loss
0
20
40
80
100
LOG OUT vs. Frequency
2
0
10 GHz
14 GHz
18 GHz
24 GHz
28 GHz
30 GHz
-5
1.7
-10
LOG OUT (V)
RETURN LOSS (dB)
60
TIME (ns)
-15
+25C
+85C
-40C
-20
POWER DETECTORS - SMT
Rise Time @ 10 GHz @ 0 dBm
1.8
LOG OUT (V)
LOG OUT (V)
Fall Time @ 10 GHz @ 0 dBm
1.4
1.1
-25
-30
0
10
20
30
40
FREQUENCY (GHz)
0.8
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
POWER DETECTORS - SMT
Absolute Maximum Ratings
EN
+3.6V
Vcc1. Vcc2
+3.6V
RF Input Power
+12 dBm
Junction Temperature
125 °C
Continuous Pdiss (T = 85°C)
(Derate 12.63 mW/°C above 85°C)
0.51W
Thermal Resistance (Rth)
(junction to ground paddle)
15.29 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 0
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC662LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
662
XXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
Pin Descriptions
Function
Description
1, 4, 5, 8, 9
N/C
No connection necessary. These pins may be connected to
RF/DC ground without affecting performance.
2
RFIN
RF input pin.
3
AC GND
External capacitor to ground is required.
See application circuit.
6, 7
GND
These pins and the exposed package bottom must be
connected to a high quality RF/DC ground.
10, 11
LOG FB,
LOG OUT
Log out and feedback. These pins should be shorted to
each other (see application circuit). Log out load should be
at least 1K Ohm or higher.
12
EN
Enable pin connected to Vcc1 or Vcc2 for normal
operation. Total supply current reduced to less
than 3mA when EN is set to 0V.
13
Vcc2
Interface Schematic
POWER DETECTORS - SMT
Pin Number
Bias Supply. Connect supply voltage to
this pin with appropriate filtering.
To ensure proper start-up supply rise time
should be faster than 100usec
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
Pin Descriptions (Continued)
POWER DETECTORS - SMT
Pin Number
14 - 16
Function
Vcc1
Description
Interface Schematic
Bias Supply. Connect supply voltage to
these pins with appropriate filtering.
To ensure proper start-up supply rise time
should be faster than 100usec
Application & Evaluation PCB Schematic
Note1: C1 and C2 should be placed as close to the package as possible.
Note2: Log out load should be 1K Ohm or higher.
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC662LP3E
v05.0914
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
POWER DETECTORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 124133 [1]
Item
Description
J1
K-Type Connector
J2
SMA Connector
J3 - J5
DC Pin
C1, C2
1 pF Capacitor, 0201 Pkg.
C3, C4
10 nF Capacitor, 0402 Pkg.
C5
47 pF Capacitor, 0402 Pkg.
C6
4.7 µF Tantalum Capacitor, CASE A Pkg.
R1
0 Ω Resistor, 0201 Pkg.
R3, R4
0 Ω Resistor, 0402 Pkg.
U1
HMC662LP3E Log Detector
PCB [2]
124131 Evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 • Fax: 978-250-3373 • Order
at www.hittite.com
Phone:On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
工商网监
湘ICP备2023018690号
