HMC665LP4 / 665LP4E
v00.0508
Features
The HMC665LP4 / HMC665LP4E is ideal for:
High Input IP3: +23 dBm
• Cellular/3G & WiMAX/LTE/4G Infrastructure
Low Input LO Drive: -3 to +6 dBm
• Base Stations & Repeaters
High LO to RF Isolation: 36 dB
• Broadband & Fixed Wireless
High Conversion Gain: 10 dB
• Access Points
Ideal for Upconversion or Downconversion
• Test & Measurement Equipment
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
TE
Typical Applications
LE
The HMC665LP4E is a highly integrated converter IC
that operates from 0.7 to 1.2 GHz for both up-conversion
and downconversion applications. The HMC665LP4E
incorporates a high dynamic range, passive doublebalanced mixer core with integrated LO and IF
amplifiers, making it ideal for compact transceiver
applications in GSM, WCDMA, TD-SCDMA, WiBro
and WiMAX. This versatile converter RFIC operates
with a low LO input power level of only -3 dBm,
provides up to 10 dB conversion gain, and exhibits
+23 dBm Input IP3 in downconversion mode. This RFIC
provides up to 11 dB conversion gain in upconverter
mode. Specific evaluation boards are available for
both upconverter and downconverter modes.
B
SO
Mixers - HIGH IP3 - SMT
10
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
O
Electrical Specifications, TA = +25° C, LO = 0 dBm, VccLO= VddIF = +5V
Parameter
Min.
Frequency Range, RF, LO
Frequency Range, IF
Conversion Gain
7
Noise Figure (SSB)
LO to RF Isolation
32
Typ.
Max.
Units
0.7 - 1.2
GHz
250 - 450
MHz
10
dB
10
dB
36
dB
LO to IF Isolation
1
dB
IP3 (Input)
23
dBm
1 dB Compression (Input)
10
dBm
LO Drive Input Level (Typical)
-3 to +6
Supply Current (IddIF + IccLO)
150
dBm
200
mA
*Unless otherwise noted, all measurements performed as a downconverter and configured as shown in the downconverter mode application
circuit, IF=250 MHz
10 - 1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Downconversion Plots
Conversion Gain vs.
LO Drive, IF = 450 MHz
10
10
5
0
-5
700
900
1100
1300
+25C
+85C
-40C
700
900
1100
1300
1500
5
0
-5
+25C
+85C
-40C
-10
-15
-20
500
1500
O
Input IP2 vs. LO Drive, IF = 450 MHz
700
90
80
80
70
70
60
700
900
RF FREQUENCY (MHz)
60
50
-3 dBm
0 dBm
+3 dBm
+6 dBm
40
1100
Input IP2 vs. Temperature, IF = 450 MHz
90
50
900
FREQUENCY (MHz)
IP2 (dBm)
IP2 (dBm)
1300
10
FREQUENCY (MHz)
30
500
1500
LE
B
SO
CONVERSION GAIN (dB)
-20
500
1300
15
10
-15
1100
20
15
-10
900
Conversion Gain vs.
Temperature, IF = 450 MHz
20
-5
700
FREQUENCY (MHz)
Conversion Gain vs.
Temperature, IF = 250 MHz
0
-5
-15
500
1500
FREQUENCY (MHz)
5
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
-10
-10
-15
500
0
TE
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
10
5
Mixers - HIGH IP3 - SMT
15
CONVERSION GAIN (dB)
15
CONVERSION GAIN (dB)
CONVERSION GAIN (dB)
Conversion Gain vs.
LO Drive, IF = 250 MHz
+25C
+85C
-40C
40
1100
1300
30
500
700
900
1100
1300
RF FREQUENCY (MHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 2
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Downconversion Plots
Input IP3 vs. Temperature, IF = 450 MHz
30
25
25
20
20
IP3 (dBm)
30
15
-3 dBm
0 dBm
+3 dBm
+6 dBm
5
700
900
1100
0
500
1300
900
1100
1300
Isolation vs. Frequency
LE
Input P1dB vs. Temperature, IF = 350 MHz
10
16
B
SO
10
+25C
+85C
-40C
700
900
1100
ISOLATION (dB)
0
13
4
500
700
RF FREQUENCY (MHz)
RF FREQUENCY (MHz)
7
+25C
+85C
-40C
10
5
0
500
15
TE
10
P1dB (dBm)
Mixers - HIGH IP3 - SMT
10
IP3 (dBm)
Input IP3 vs. LO Drive, IF = 450 MHz
-10
RF to IF
LO to RF
LO to IF
-20
-30
-40
500
1300
700
900
1100
1300
1500
1700
FREQUENCY (MHz)
RF FREQUENCY (MHz)
Upconversion Plots
Conversion Gain vs.
LO Drive, IF = 450 MHz
15
15
10
10
CONVERSION GAIN (dB)
CONVERSION GAIN (dB)
O
Conversion Gain vs.
LO Drive, IF = 250 MHz
5
0
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
-5
825
1000
FREQUENCY (MHz)
10 - 3
0
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
-5
-10
-10
-15
650
5
1175
1350
-15
650
825
1000
1175
1350
FREQUENCY (MHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Input IP3 vs. LO Drive, IF = 450 MHz
20
80
15
10
70
60
50
LO = -3 dBm
LO = 0 dBm
LO = 3 dBm
LO = 6 dBm
30
650
800
950
-5
1100
-15
650
1250
LE
-15
Conversion Gain
Return Loss
B
SO
-20
RETURN LOSS (dB)
-5
-10
300
400
500
600
-10
-15
-20
RF
LO
-25
-30
0
0.5
MxN Spurious @ IF Port
1
2
4
2.5
3
nLO Spur at RF Port
0
1
2
3
4
LO Freq. (GHz)
1
2
3
4
xx
3
21
29
58
0.5
31
32
32
39
7
0
33
52
59
0.6
28
23
32
47
66
56
50
65
84
0.7
30
21
30
44
91
84
73
77
91
0.8
37
21
32
47
91
91
91
91
91
0.9
38
23
37
53
1.0
35
24
40
43
1.2
34
27
33
55
1.4
35
32
33
58
1.6
36
38
46
62.6
O
3
2
Harmonics of LO
nLO
1
1.5
FREQUENCY (MHz)
IF FREQUENCY (MHz)
0
1250
-5
0
mRF
1100
0
5
RESPONSE (dB)
950
Return Loss
10
-35
200
800
RF FREQUENCY (MHz)
IF Bandwidth
-30
-3 dBm
0 dBm
+3 dBm
+6 dBm
-10
RF FREQUENCY (MHz)
-25
0
TE
40
10
5
All values in dBc below IF power level (1RF - 1LO)
Absolute Maximum Ratings
RF / MIX IF Input (VddIF = +5V)
+22 dBm
LO Input (VccLO = +5V)
+10 dBm
IFIN
+15 dBm
VccLO
+7 Vdc
VddIF
+8 Vdc
Junction Temperature
150 °C
Continuous Pdiss (T = 85°C)
(derate 14.9 mW/°C above 85°C)
0.97 W
Thermal Resistance (junction to ground paddle)
Storage Temperature
Operating Temperature
Mixers - HIGH IP3 - SMT
90
IP3 (dBm)
IP2 (dBm)
Input IP2 vs. LO Drive, IF = 450 MHz
LO = 0 dBm
Values in dBc below input LO level measured at RF port.
Typical Supply Current
VddIF + VccLO
IddIF + IccLO
67.2 °C/W
+4.5
130 mA
-65 to +150°C
+5.0
150 mA
-40 to +85°C
+5.5
165 mA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 4
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Typical Performance Cascade Analysis HMC665LP4E Downconverter Mode
(RF Input = 700 to 1200 MHz, IF Output = 250 to 450 MHz, LO = Low Side or High Side)
Component Level
NF
(dB)
OIP3
(dBm)
Mixer w/ LO Amplifier
-8.0
8.5
15.0
7.0
IF Amplifier
18.0
1.0
37.5
21.0
150.0
Description
10
HMC665LP4E
OP1dB
(dBm)
Cumulative MCM Performance
Gain
(dB)
Cumulative MCM Performance
+5V
Current (mA)
Gain
(dB)
NF
(dB)
OIP3
(dBm)
IIP3
(dBm)
OP1dB
(dBm)
57.0
-8.0
8.5
15.0
23.0
7.0
16.0
93.0
10.0
9.4
31.7
21.7
19.5
10.5
10.0
9.4
31.7
21.7
19.5
10.5
IP1dB
(dBm)
TE
Typical Performance Cascade Analysis HMC665LP4E Upconverter Mode
(RF Output = 700 to 1200 MHz, IF Input = 250 to 450 MHz, LO = Low Side or High Side)
Component Level
IF Amplifier
18.0
1.0
38
Mixer w/ LO Amplifier
-7.5
8.5
21
HMC665LP4E
Cumulative MCM Performance
NF
(dB)
OIP3
(dBm)
OP1dB
(dBm)
+5V
Current (mA)
Gain
(dB)
21.0
93.0
18.0
NF
(dB)
7.0
1.0
Cumulative MCM Performance
OIP3
(dBm)
IIP3
(dBm)
OP1dB
(dBm)
IP1dB
(dBm)
38
20
21.0
4.0
57.0
10.0
1.3
20.5
10
7.0
-3.0
150.0
10.0
1.3
20.5
10
7.0
-3.0
LE
Description
Gain
(dB)
* IF image rejection filter is not included in the released eval boards.
B
SO
Outline Drawing
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
O
Mixers - HIGH IP3 - SMT
* RF image rejection filter is not included in the released eval boards.
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
10 - 5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: AnalogMA
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayPhone:
result from 978-250-3343
its use. Specifications subject
to
change
without
notice.
No
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks areApplication
the property of their
respective owners.
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Package Information
Package Body Material
Lead Finish
MSL Rating
HMC665LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC665LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H665
XXXX
H665
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
TE
Pin Descriptions
Function
3
RF
This pin is DC coupled and
matched to 50 Ohms.
7
IFIN
This pin is matched to 50 Ohms with a 56nH inductor to
ground. See Application Circuit.
9
CAP
AC ground. An external capacitor of 0.01 µF to ground is
required for low frequency bypassing. See application circuit
for further details.
Interface Schematic
B
SO
N/C
Description
No connection. These pins may be connected to
RF ground. Performance will not be affected.
LE
Pin Number
1, 2, 4, 5, 6, 8, 11, 14,
15, 19, 20, 22 - 24
MIXIF
12
IFOUT
This pin is AC coupled and
matched to 50 Ohms.
13
VddIF
Power supply for IF amplifier. Choke
inductor and bypass capacitor are required.
See application circuit.
O
10
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to DC,
this pin must not source/sink more than 18 mA of current or
part non-function and possible part failure will result.
16
MIXLO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
17
GND
Backside of package has exposed metal ground
paddle that must also be connected to ground.
18
VccLO
Power supply and RF Output of the LO
amplifier. Three external bypass capacitors
are recommended for optimum performance,
as illustrated in the application circuit.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
Mixers - HIGH IP3 - SMT
Part Number
10 - 6
HMC665LP4 / 665LP4E
v00.0508
Pin Descriptions
(Continued)
Pin Number
Function
Description
21
LO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
See application circuit.
10
Interface Schematic
LE
TE
Evaluation PCB - Upconverter Mode
B
SO
Mixers - HIGH IP3 - SMT
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
O
List of Materials for Evaluation PCB 122009 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4
2mm DC Header
C1, C2, C3
100 pF Chip Capacitor, 0402 Pkg.
C4, C6
1000 pF Chip Capacitor, 0603 Pkg.
C5, C7
2.2 µF Capacitor, Tantalum
C8
0.01 µF Chip Capacitor, 0402 Pkg.
L1, L2
56 nH Chip Inductor, 0402 Pkg.
L3
36 nH Chip Inductor, 0603 Pkg.
R1, R3, R4
0 Ohm Resistor, 0402 Pkg.
R5
24 Ohm Resistor, 1210 Pkg.
U1
HMC665LP4(E) - Mixer
PCB [2]
119242 Evaluation Board
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
10 - 7
Information
furnished
by Analog and
Devices
believedorders:
to be accurate
and Microwave
reliable. However,Corporation,
no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
to isplace
Hittite
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order
On-line
at www.hittite.com
Phone:
781-329-4700
•
Order
online
at
www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
Trademarks and registered trademarks are
the property of their
respective owners.
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Evaluation PCB - Downconverter Mode
Mixers - HIGH IP3 - SMT
B
SO
LE
TE
10
List of Materials for Evaluation PCB 122010 [1]
Item
PCB Mount SMA RF Connector
O
J1 - J3
Description
J4
2mm DC Header
C1, C2, C3
100 pF Chip Capacitor, 0402 Pkg.
C4, C6
1000 pF Chip Capacitor, 0603 Pkg.
C5, C7
2.2 µF Capacitor, Tantalum
C8
0.01 µF Chip Capacitor, 0402 Pkg.
L1, L2
56 nH Chip Inductor, 0402 Pkg.
L3
36 nH Chip Inductor, 0603 Pkg.
R2, R3, R4
0 Ohm Resistor, 0402 Pkg.
R5
24 Ohm Resistor, 1210 Pkg.
U1
HMC665LP4(E) - Mixer
PCB [2]
119242 Evaluation Board
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price, delivery and to place orders: Hittite Microwave Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 8
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Application Circuit - Upconverter Mode
TE
LE
B
SO
O
Mixers - HIGH IP3 - SMT
10
10 - 9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Application Circuit - Downconverter Mode
Mixers - HIGH IP3 - SMT
O
B
SO
LE
TE
10
Information
furnished
by Analog and
Devices
believedorders:
to be accurate
and Microwave
reliable. However,Corporation,
no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
toisplace
Hittite
Alpha
Road,
Chelmsford,
MADevices,
01824Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order
On-line at www.hittite.com
Phone: 781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10 - 10
工商网监
湘ICP备2023018690号
