HMC773-SX

HMC773LC3B v04.0514 MIXERS - SINGLE & DOUBLE BALANCED - SMT GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Typical Applications Features The HMC773LC3B is ideal for: Passive: No DC Bias Required • Point-to-Point Radios Input IP3: +22 dBm • Point-to-Multi-Point Radios & VSAT LO/RF Isolation: 38 dB • Test Equipment & Sensors Wide IF Bandwidth: DC - 8 GHz • Military End-Use 12 Lead Ceramic 3x3 mm SMT Package: 9mm2 Functional Diagram General Description The HMC773LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 6 and 26 GHz. This mixer requires no external components or matching circuitry. The HMC773LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates with LO drive levels above +13 dBm. The HMC773LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifications, TA = +25° C, IF = 0.5 GHz, LO = +13 dBm* Parameter Min. Typ. Max. Min. Typ. Frequency Range, RF & LO 6 - 16 16 - 26 Frequency Range, IF DC - 8 DC - 8 Conversion Loss 9 LO to RF Isolation 37 12 9 Max. Units GHz GHz 11 dB 39 dB dB LO to IF Isolation 31 37 21 32 RF to IF Isolation 5 11 10 20 dB IP3 (Input) 17 22 dBm IP2 (Input) 45 50 dBm 1 dB Gain Compression (Input) 10 11 dBm * Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC773LC3B v04.0514 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Conversion Gain vs. Temperature Isolation -10 -4 -8 -12 +25C +85C -40C -16 -40 -60 6 10 14 18 FREQUENCY (GHz) 22 26 6 10 14 18 FREQUENCY (GHz) 22 26 Return Loss Conversion Gain vs. LO Drive 0 0 -5 9 dBm 11 dBm 13 dBm 15 dBm -4 RETURN LOSS (dB) CONVERSION GAIN (dB) LO/RF RF/IF LO/IF -30 -50 -20 -8 -12 -16 -10 -15 -20 RF LO -25 -30 -20 -35 6 10 14 18 FREQUENCY (GHz) 22 26 6 10 14 18 FREQUENCY (GHz) 22 26 22 26 Upconverter Performance Conversion Gain vs. LO Drive IF Bandwidth 0 0 CONVERSION GAIN (dB) Conversion Gain IF Return Loss -5 RESPONSE (dB) -20 -10 -15 -20 -25 MIXERS - SINGLE & DOUBLE BALANCED - SMT 0 ISOLATION (dB) CONVERSION GAIN (dB) 0 -4 -8 -12 9 dBm 11 dBm 13 dBm 15 dBm -16 -20 0 2 4 6 8 FREQUENCY (GHz) 10 12 6 10 14 18 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC773LC3B v04.0514 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz 30 25 25 20 20 IP3 (dBm) IP3 (dBm) Input IP3 vs. Temperature* 30 15 10 +25C +85C -40C 5 0 0 6 10 14 18 FREQUENCY (GHz) 22 26 6 80 70 70 60 60 50 50 IP2 (dBm) 80 40 30 9 dBm 11 dBm 13 dBm 15 dBm 20 10 10 14 18 FREQUENCY (GHz) 22 26 22 26 22 26 Input IP2 vs. Temperature * Input IP2 vs. LO Drive * IP2 (dBm) 15 10 9 dBm 11 dBm 13 dBm 15 dBm 5 40 30 +25C +85C -40C 20 10 0 0 6 10 14 18 FREQUENCY (GHz) 22 26 Input P1dB vs. LO Drive 6 20 16 16 12 8 11 dBm 13 dBm 15 dBm 4 10 14 18 FREQUENCY (GHz) Input P1dB vs. Temperature 20 P1dB (dBm) P1dB (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT Input IP3 vs. LO Drive * 12 8 +25C +85C -40C 4 0 0 6 10 14 18 FREQUENCY (GHz) 22 26 6 10 14 18 FREQUENCY (GHz) * Two-tone input power = -5 dBm each tone, 1 MHz spacing. 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC773LC3B v04.0514 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz MxN Spurious Outputs nLO mRF 0 1 2 3 4 RF / IF Input +21 dBm LO Drive +21 dBm 0 XX 14.5 30.3 31.3 53.3 Channel Temperature 150 °C 1 0 0 21.6 22.5 46.7 210 mW 2 69.0 61.7 62.5 63.7 74.6 Continuous Pdiss (Ta = 85 °C) (derate 3.3 mW/°C above 85 °C) 3 >100 79.4 65.8 68.2 59.6 Thermal Resistance (junction to ground paddle) 170 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C RF = 9 GHz @ -10 dBm LO = 8 GHz @ +13 dBm All values in dBc below the IF output power level. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. MIXERS - SINGLE & DOUBLE BALANCED - SMT Absolute Maximum Ratings Package Information Part Number Package Body Material Lead Finish HMC773LC3B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H773 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC773LC3B v04.0514 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz MIXERS - SINGLE & DOUBLE BALANCED - SMT Pin Descriptions 5 Pin Number Function Description 1, 3, 7, 9, 10, 12 GND These pins and package bottom must also be connected to RF/DC ground. 2 LO This pin is AC coupled and matched to 50 Ohms. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is AC coupled and matched to 50 Ohms. 4, 6, 11 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC773LC3B v04.0514 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz List of Materials for Evaluation PCB 125042 Item Description J1 - J2 SRI SMA Connector J3 2.92mm PCB Mount K-Connector U1 HMC773LC3B Mixer PCB [2] 125040 Evaluation PCB [1] Reference this number when ordering compete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - SINGLE & DOUBLE BALANCED - SMT Evaluation PCB 6