HMC801LP3ETR

HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz Typical Applications Features The HMC801LP3E is ideal for both RF and IF applications: ± 0.4 dB Typical Step Error • Test Equipment and Sensors High IP3: +53 dBm • ISM, MMDS, WLAN, WiMAX, WiBro Single Control Line • Microwave Radio & VSAT TTL/CMOS Compatible Control • Cellular Infrastructure Single +5V Supply TE Low Insertion Loss: 2 dB 16 Lead 3x3 mm SMT Package: 9 mm² Functional Diagram General Description LE The HMC801LP3E is a broadband bidirectional 1-bit GaAs IC digital attenuator in a low cost leadless surface mount package. This single positive control line digital attenuator utilizes off chip AC ground capacitors for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering DC to 10 GHz, the insertion loss is less than 2 dB typical and attenuation accuracy is excellent at ±0.4 dB typical step error. The attenuator also features a high IIP3 of +53 dBm. One TTL/CMOS control input is used to select the attenuation state and a single Vdd bias of +5V is required. B SO Attenuators - DIGITAL - SMT 5 Electrical Specifications, TA = +25° C, With Vdd = +5V & Vctl = 0/+5V O Parameter Frequency (GHz) Min. Typ. Max. Units 2.0 3.0 3.5 dB dB dB Insertion Loss DC - 4 GHz 4 - 8 GHz 8 - 10 GHz 1.0 2.0 2.5 Attenuation Range DC - 10 GHz 15 dB Return Loss (RF1 & RF2, Both States) DC - 6 GHz 6 - 10 GHz 18 14 dB dB Attenuation Accuracy: (Referenced to Insertion Loss) DC - 8 GHz 8 - 10 GHz ± 0.4 ± 0.5 Input Power for 0.1 dB Compression DC - 0.4 GHz 0.4 - 10 GHz 20 30* dBm dBm Input Third Order Intercept Point (Two-Tone Input Power= 0 dBm Each Tone) DC - 0.4 GHz 0.4 - 10 GHz 43 53 dBm DC - 10 GHz 120 150 ns ns ± 0.6 ± 0.7 dB dB Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) * For frequencies greater than 0.4 GHz, the 0.1 dB compression point is greater than the absolute maximum RF input power of 30 dBm. 5-1 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz Insertion Loss RETURN LOSS (dB) -2 +25 C +85 C -40 C -3 INSERTION LOSS 15 dB -10 -20 TE INSERTION LOSS (dB) -1 -4 -30 -40 -5 0 2 4 6 8 10 0 12 2 4 6 8 10 12 10 12 10 12 FREQUENCY (GHz) LE FREQUENCY (GHz) Relative Attenuation Output Return Loss -9 -20 -30 B SO -10 INSERTION LOSS 15 dB -40 0 2 4 6 8 10 NORMALIZED ATTENUATION (dB) 0 -11 -13 -15 Attenuators - DIGITAL - SMT 0 0 RETURN LOSS (dB) 5 Input Return Loss -17 -19 -21 12 0 2 FREQUENCY (GHz) 4 6 8 FREQUENCY (GHz) Bit Error vs. Frequency O Relative Phase vs. Frequency 1.2 50 0.8 30 20 BIT ERROR (dB) RELATIVE PHASE (dB) 40 10 0 -10 -20 -30 0.4 0 -0.4 -0.8 -40 -1.2 -50 0 2 4 6 8 10 12 FREQUENCY (GHz) 0 2 4 6 8 FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 5-2 HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz Input IP3 vs. Frequency (Low Frequency Detail) 70 70 60 60 50 50 IP3 (dBm) INSERTION LOSS 15 dB 40 INSERTION LOSS 15 dB 40 TE IP3 (dBm) Input IP3 vs. Frequency 30 30 20 20 0 2 4 6 8 10 12 0 FREQUENCY (GHz) 0.1 0.2 LE (Low Frequency Detail) 40 30 B SO 25 15 0.4 0.5 Truth Table Control Voltage Input 35 20 0.3 FREQUENCY (GHz) Input Power for 0.1 dB Compression* P0.1dB INPUT POWER (dBm) Attenuators - DIGITAL - SMT 5 V1 Attenuation State RF1 - RF2 High Reference Insertion Loss Low 15 dB Bias Voltage & Current 10 5 0 0 0.1 0.2 0.3 0.4 0.5 Vdd = +5 Vdc ± 10% Vdd (Vdc) Idd (Typ.) (mA) 4.5 0.21 5.0 0.23 5.5 0.25 O FREQUENCY (GHz) Control Voltage State Bias Condition Low 0 to +0.8V @ -1 µA Typ. High +2 to +5V @ 30 µA Typ. Note: Vdd = +5V * For frequencies greater than 0.4 GHz, the 0.1 dB compression point is greater than the absolute maximum RF input power of 30 dBm. 5-3 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz +30 dBm Control Voltage Range (V1) -1 to Vdd +1V +7 Vdc Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 12 mW/°C above 85 °C) 0.783 W Thermal Resistance (channel to ground paddle) 83 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A LE Bias Voltage (Vdd) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS TE RF Input Power (DC - 10 GHz) B SO Outline Drawing Attenuators - DIGITAL - SMT 5 Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE O 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC801LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [1] Package Marking [2] H801 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 5-4 HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz Pin Descriptions Function Description 1 Vdd Supply Voltage. 2, 4, 9, 11 GND These pins and the exposed ground paddle must be connected to RF/DC ground. 3, 10 RF1, RF2 These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. Select value based on lowest frequency of operation. 5, 8 ACG1, ACG2 External capacitor to ground is required. Select value for lowest frequency of operation. Place capacitor as close to pins as possible. 6, 7, 12, 13, 15, 16 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 14 V1 Interface Schematic LE TE Pin Number See truth table and control voltage table. B SO Attenuators - DIGITAL - SMT 5 O Application Circuit 5-5 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC801LP3E v01.0610 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz TE LE B SO Attenuators - DIGITAL - SMT 5 Evaluation PCB O List of Materials for Evaluation PCB 126894 [1] Item Description J1, J2 PCB Mount SMA Connector J3, J4 DC Connector C1 1000 pF Capacitor, 0603 Pkg. C2, C3 100 pF Capacitor, 0402 Pkg. C4, C5 330 pF Capacitor, 0402 Pkg. U1 HMC801LP3E Digital Attenuator PCB [2] 121213 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 or Arlon 25FR For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 5-6