HMC824LP6CE
v05.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 780 - 870 MHz
Features
• RF Bandwidth: 780 to 870 MHz
• 24-bit Step Size, Resolution 3 Hz typ
• Ultra Low Phase Noise
-110 dBc/Hz in Band Typ.
• Exact Frequency Mode
• Figure of Merit (FOM) -227 dBc
• 40 Lead 6x6mm SMT Package: 36mm2
• Built-in Digital Self Test
• < 180 fs RMS Jitter
Typical Applications
7
• Cellular/4G Infrastructure
• Phased Array Applications
• Repeaters and Femtocells
• DDS Replacement
• Communications Test Equipment
• Very High Data Rate Radios
PLLS w/ Integrated VCO - SMT
• CATV Equipment
7-1
Functional Diagram
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
General Description
The HMC824LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled
Oscillator (VCO). The PLL consists of an integrated low noise VCO with divide-by-2 output, an autocalibration
subsystem for low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge
pump, a low noise reference path divider and a fractional divider.
The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-fine step sizes and
low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for
faster frequency hopping and low micro-phonics.
Electrical Specifications, TA = +25° C
VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =
3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V
Parameter
Condition
Min.
Typ.
Max.
Units
RF Output Characteristics
VCO Frequency at PLL Input
1560
1740
MHz
RF Output Frequency at f VCO/2
780
870
MHz
16.5
dBm
RF Output Power at f VCO/2
11
VCO Tuning Sensitivity
Measured at 2 GHz, 2V
VCO Supply Pushing
Measured at 2 GHz, 2V
14
15
-2
MHz/V
1.5
MHz/V
RF Output 2nd Harmonic
-25
dBc
RF Output 3rd Harmonic
-23
dBc
RF Output 4th Harmonic
-31
dBc
RF Divider Characteristics
19-Bit N-Divider Range (Integer)
19-Bit N-Divider Range (Fractional)
Max = 219 - 1
16
524,287
Fractional nominal divide ratio
varies (-3 / +4) dynamically max
20
524,283
Synthesizer phase noise can
degrade by about 5dB when
operating with a reference
frequency near the low end of
this range.
10
50
200
MHz
AC Coupled
1.5
2
3.3
Vpp
5
pF
REF Input Characteristics
Max Ref Input Frequency
Ref Input Range
Ref Input Capacitance
14-Bit R-Divider Range
1
16,383
0.1
100
MHz
0.1
80
MHz
0.1
125
MHz
7
PLLS w/ Integrated VCO - SMT
For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To
view the Operating Guide, please visit www.hittite.com and choose HMC824LP6CE from the “Search by Part
Number” pull down menu.
Phase Detector (PD)
PD Frequency Fractional Feedback Mode
[1]
PD Frequency Fractional Feedforward Mode
(and Register 6 [17:16]= 10)
PD Frequency Integer Mode
[1]
Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback
mode, the maximum PFD rate = fvco/20 or 100MHz, whichever is less.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
7-2
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Electrical Specifications (Continued)
Parameter
Condition
Min.
Typ.
Max.
Units
2.54
mA
Charge Pump
Max Output Current
0.2
Charge Pump Gain Step Size (5-Bits)
PD/Charge Pump SSB Phase Noise
20
µA
50 MHz Ref, Input Referred
1 kHz
-141
dBc/Hz
10 kHz
Add 1 dB for Fractional
-149
dBc/Hz
100 kHz
Add 3 dB for Fractional
-153
dBc/Hz
Logic Inputs
PLLS w/ Integrated VCO - SMT
7
VIH Input High Voltage
DVDD3V-0.4
DVDD3V
V
VIL Input Low Voltage
0
0.4
V
VOH Output High Voltage
DVDD3V-0.4
DVDD3V
V
VOL Output Low Voltage
0
0.4
V
3.5
V
Logic Outputs
Power Supply Voltages
AVDD, VCCHF, VCCPS,
VCCPD, RVDD
3.0
3.3
DVDD3V
3.0
3.3
3.5
V
VPPCP, VDDCP, VCC1, VCC2
4.8
5
5.2
V
Analog 3.3V Supplies
Digital Supply
Analog 5V Supplies
Power Supply Currents
+5V Analog Charge Pump
VPPCP, VDDCP
5.3
mA
+5V VCO Core and PLL Buffer
VCC2
56
mA
+5V VCO Divider and RF Buffer
VCC1
36
mA
+3.3V Analog
AVDD, VCCHF, VCCPS,
VCCPD, RVDD
45
mA
+3.3V Digital
DVDD3V
6.5
mA
Reg 01h=0,
Crystal Not Clocked
10
µA
Reg 01h=0,
Crystal Clocked 100 MHz
10
Power Down - Crystal Off
Power Down - Crystal On, 100 MHz
200
µA
Power on Reset
Typical Reset Voltage on DVDD
700
Min DVDD Voltage for No Reset
1.5
Power on Reset Delay
mV
V
250
µs
-93
dBc/Hz
dBc/Hz
VCO Open Loop Phase Noise at fvco/2
825 MHz Divide-by-2 Output
10 kHz Offset
825 MHz Divide-by-2 Output
100 kHz Offset
-123
825 MHz Divide-by-2 Output
1 MHz Offset
-148
dBc/Hz
825 MHz Divide-by-2 Output
10 MHz Offset
-162
dBc/Hz
825 MHz Divide-by-2 Output
100 MHz Offset
-166
dBc/Hz
1 kHz Offset
-112
dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco/2
Integer, 25 MHz PFD
7-3
Integer, 25 MHz PFD
10 kHz Offset
-116
dBc/Hz
Integer, 25 MHz PFD
100 kHz Offset
-118
dBc/Hz
Integer, 25 MHz PFD
1 MHz Offset
-146
dBc/Hz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Electrical Specifications (Continued)
Parameter
Condition
Fractional, 25 MHz PFD
Min.
Max.
Units
-107
dBc/Hz
Fractional, 25 MHz PFD
10 kHz Offset
-113
dBc/Hz
Fractional, 25 MHz PFD
100 kHz Offset
-115
dBc/Hz
Figure of Merit
Normalized 1 Hz
Integer Mode
Measured w/ 50 MHz PD
at 30 kHz Offset
-229
dBc/Hz
Fractional Mode
Measured w/ 50 MHz PD
at 30 kHz Offset
-227
dBc/Hz
-70
-80
-80
-90
PHASE NOISE (dBc/Hz)
775 MHz FF
825 MHz FF
875 MHz FF
-100
-110
-120
-130
-140
-150
-160
780 MHz FF
820 MHz FF
870 MHz FF
-90
-100
-110
-120
-130
-140
-150
-160
10
3
10
4
10
5
10
6
10
7
10
-170
2
10
8
10
3
10
4
10
5
10
6
10
7
10
8
OFFSET FREQUENCY (Hz)
OFFSET FREQUENCY (Hz)
Typical VCO/2 Tuning Curves vs. Switch
Position
VCO/2 Free Running Phase Noise
-40
fmax
n0
775 MHz
825 MHz
875 MHz
-80
kvco (MHz/V)
PHASE NOISE (dBc/Hz)
-60
-100
-120
-140
fmin
n2
n4
n6
n8
n10
n12
n14
n16
n18
n20
n22
n24
n26
-160
-180
3
10
10
4
10
5
10
6
OFFSET FREQUENCY (Hz)
10
7
10
8
0
1
2
3
n30
n30
PLLS w/ Integrated VCO - SMT
-70
-170
2
10
7
Typical Closed Loop Fractional Phase
Noise [1]
Closed Loop Integer Phase Noise
PHASE NOISE (dBc/Hz)
Typ.
1 kHz Offset
n31
4
5
TUNING VOLTAGE (V)
[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop filter values: Contact factory for component values) 2mA Charge Pump, -385µA
Offset.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
7-4
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Typical VCO Tuning Voltage After
Calibration
Free Running VCO Phase Noise
(VTUNE Set by AutoCal)
TUNE VOLTAGE AFTER CALIBRATION (V)
-120
PHASE NOISE (dBc/Hz)
100 kHz Offset
-130
-140
10 MHz Offset
-160
780
800
820
840
860
880
4
fmin
3
fmax
31
15
0
2
1
0
FREQUENCY (MHz)
VCO FREQUENCY (MHz)
Typical VCO Sensitivity vs. Cap @
Fo Voltage
Typical Output Power - Narrow Band
Match
60
20
50
TUNING CAP 31
TUNING CAP 15
TUNING CAP 0
40
30
OUTPUT POWER (dBm)
kvco (MHz/V)
Typical Operating Range
20
15
10
5
10
0
0
1
2
3
4
0
750
5
TUNING VOLTAGE (V)
800
850
900
OUTPUT FREQUENCY (MHz)
Figure of Merit
NORMALIZED PHASE NOISE (dBc/Hz)
PLLS w/ Integrated VCO - SMT
1 MHz Offset
-150
-170
760
7
+27C
-40C
+85C
5
-200
-210
Typ FOM vs Offset
-220
FOM Floor
FOM 1/f Noise
-230
-240
10
2
10
3
10
4
10
5
10
6
FREQUENCY OFFSET (Hz)
7-5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Pin Descriptions
Function
Description
1
AVDD
DC Power Supply for analog circuitry.
2, 5, 6, 8, 9,
11 - 14, 18 - 22,
24, 26, 34, 37, 38
N/C
The pins are not connected internally; however, all data shown herein was measured
with these pins connected to RF/DC ground externally.
3
VPPCP
Power Supply for charge pump analog section
4
CP
Charge Pump Output
7
VDDCP
Power Supply for the charge pump digital section
10
RVDD
Reference Supply
15
XREFP
Reference Oscillator Input
16
DVDD3V
DC Power Supply for Digital (CMOS) Circuitry
17
CEN
Chip Enable. Connect to logic high for normal operation.
23
VTUNE
VCO Varactor. Tuning Port Input.
25
VCC2
VCO Analog Supply 2
27
VCC1
VCO Analog Supply 1
28
RF_N
VCO Divide by 2 RF Positive Output
29
RF_P
VCO Divide by 2 RF Negative Output
30
SEN
PLL Serial Port Enable (CMOS) Logic Input
31
SDI
PLL Serial Port Data (CMOS) Logic Input
32
SCK
PLL Serial Port Clock (CMOS) Logic Input
33
LD_SDO
Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
35
VCCHF
DC Power Supply for Analog Circuitry
36
VCCPS
DC Power Supply for Analog Prescaler
39
VCCPD
DC Power Supply for Phase Detector
BIAS
External bypass decoupling for precision bias circuits.
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
normal 10MΩ DVM will read erroneously.
40
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
7
PLLS w/ Integrated VCO - SMT
Pin Number
7-6
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Absolute Maximum Ratings
AVDD, RVDD, DVDD3V, VCCPD,
VCCHF, VCCPS
-0.3V to +3.6V
VPPCP, VDDCP, VCC1
-0.3V to +5.8V
VCC2
-0.3V to +5.5V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to 125°C
Maximum Junction Temperature
125 °C
Thermal Resistance (RTH)
(junction to ground paddle)
20 °C/W
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Reflow Soldering
PLLS w/ Integrated VCO - SMT
7
Peak Temperature
260°C
Time at Peak Temperature
40 sec
ESD Sensitivity (HBM)
Class 1B
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
Package Marking [1]
HMC824LP6CE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
H824
XXXX
[1] 4-Digit lot number XXXX
7-7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Evaluation PCB
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC824LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
PLLS w/ Integrated VCO - SMT
7
7-8
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
List of Materials for Evaluation PCB 127828 [1]
PLLS w/ Integrated VCO - SMT
7
Item
Description
J1, J2
PCB Mount SMA RF Connector
J3
Dual Row Terminal Strip
J4 - J6
Connector Header
C1, C15 - C17, C25
10 µF Capacitor, 0805 Pkg.
C2, C3, C6, C7, C11, C12,
C14, C18, C27, C43, C45
0.47 µF Capacitor, 0402 Pkg.
C4, C13
22 pF Capacitor, 0402 Pkg.
C5, C33
1000 pF Capacitor, 0402 Pkg.
C8
2.2 pF Capacitor, 0402 Pkg.
C19 - C24, C28, C30, C32, C34
0.1 µF Capacitor, 0402 Pkg.
C26
1.0 µF Capacitor, 0603 Pkg.
C29
47 pF Capacitor, 0402 Pkg.
C35
3300 pF Capacitor, 0402 Pkg.
C36
270 pF Capacitor, 0402 Pkg.
C37, C38
68 pF Capacitor, 0402 Pkg.
C39 - C42, C44
4.7 µF Tantalum Capacitor, 0805 Pkg
C46
27 pF Capacitor, 0402 Pkg.
R1, R2, R5, R11, R15, R18, R19, R21, R24
Zero Ohm Resistor, 0402 Pkg.
R3, R4
1 Ohm Resistor, 0402 Pkg.
R6, R7
0 Ohm Resistor, 0805 Pkg.
R8
22 Ohm Resistor, 0402 Pkg.
R12, R20, R29
51 Ohm Resistor, 0402 Pkg.
R22, R25
20 kOhm Resistor, 0402 Pkg.
R26 - R28
1k Ohm Resistor, 0402 Pkg.
L1
12 nH Inductor, 0402 Pkg.
L2, L3
47 nH Inductor, 0402 Pkg/
TP3, TP4
Test Point PC Compact SMT
U1
HMC824LP6CE PLL with Integrated VCO
U2
HMC860LP3E
Low Noise Quad Linear Regulator
Y1
3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2]
125998 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
7-9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC824LP6CE
v05.1211
FRACTIONAL-N SYNTHESIZER WITH
INTEGRATED VCO, 780 - 870 MHz
Notes:
PLLS w/ Integrated VCO - SMT
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
7 - 10
工商网监
湘ICP备2023018690号
