HMC841LC4BTR-R5

HMC841LC4B v04.0914 HIGH SPEED LOGIC - SMT 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Typical Applications Features The HMC841LC4B is ideal for: Supports Data Rates up to 43 Gbps • OC-768 and SDH STM-256 Equipment Low Power Consumption: 630 mW • RF ATE Applications Fast Rise and Fall Times: 12/12 ps • Serial Data Transmission up to 43 Gbps Single Ended or Differential Operation • Digital Logic Systems up to 43 Gbps Adjustable Differential Output Voltage Swing: 200 - 850 mVp-p • Broadband Test & Measurement 24 Lead 4x4mm SMT Package: 16mm2 Functional Diagram General Description The HMC841LC4B is a D-type Flip Flop designed to support data transmission rates of up to 43 Gbps, and clock frequencies as high as 43 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications. The HMC841LC4B also features an output level control pin, VAC, which allows for loss compensation or for signal level optimization. All input signals to the HMC841LC4B are terminated with 50 Ohms to ground on-chip, and maybe either AC or DC coupled. The differential outputs of the HMC841LC4B may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohms-to-ground terminated system, while DC blocking capacitors should be used if the terminating system is 50 Ohms to a non-ground DC voltage. The HMC841LC4B operates from a single -3.3V DC supply and is available in a ceramic RoHS compliant 4x4 mm SMT package. Electrical Specifications, TA = +25°C, Vee = -3.3V Conditions Min. Typ. Max Power Supply Voltage Parameter ±5 % Tolerance -3.47 -3.3 -3.13 V Power Supply Current VAC = -0.3V 160 190 220 mA -1.6 -0.3 -0.1 V Output Amplitude Control Voltage VAC [1] Maximum Data Rate 43 Gbps Maximum Clock Rate 43 GHz Input Amplitude (Data) Input Amplitude (Clock) Input High Voltage (Data & Clock) 1 Units Single-ended, peak-to-peak 200 500 Differential, peak-to-peak 200 1000 Single-ended, peak-to-peak 400 800 Differential, peak-to-peak 250 1000 -0.5 0.5 mVp-p mVp-p V Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Parameter Conditions Min. Input Low Voltage (Data & Clock) Typ. Max Units 0 V 850 mVp-p -1 Output Amplitude Differential, peak-to-peak @ 40 Gbps 200 Output High Voltage VAC = -0.3 -50 mV Output Low Voltage VAC = -0.3 -550 mV Input Return Loss Output Return Loss Deterministic Jitter, Jd Data input up to 25 GHz 10 dB Clock input up to 40 GHz 6 dB Data output up to 25 GHz 10 dB [2] 2 ps, pp Additive Random Jitter Jr [3] 0.2 ps rms Rise Time, tr [2] 12 ps Fall Time, tf [2] Propagation Delay, td 12 ps Clock to output delay 10 ps @ 40 Gbps 270 deg Clock Phase Margin [1] VAC = VC2 on evaluation board. [2] Clock Input: 40 GHz clock signal, 200 mVp-p single-ended, Data Input: 40 Gbps PRBS 223 -1 pattern, 200 mVp-p single-ended [3] Random jitter is measured with 40 Gbps 10101… pattern DC Current vs. Supply Voltage Differential Output Swing vs. Supply Voltage [1] [2] [1] [2] 250 DIFFERENTIAL VOLTAGE (mVp-p) 1000 DC CURRENT (mA) 225 200 175 150 +25C +70C -40C 125 100 -3.47 -3.41 -3.36 -3.3 -3.24 -3.19 800 700 600 -3.47 -3.13 +25C +70C -40C 900 -3.41 SUPPLY VOLTAGE Vee (V) -3.24 -3.19 -3.13 DIFFERENTIAL VOLTAGE (mVp-p) 1000 225 200 175 150 +25C +70C -40C 125 -1.3 -1 -0.7 -0.4 -0.1 CONTROL VOLTAGE VAC (V) [1] VAC = -0.3V -3.3 Differential Output Swing vs. VAC [2] 250 100 -1.6 -3.36 SUPPLY VOLTAGE Vee (V) DC Current vs. VAC [2] DC CURRENT (mA) HIGH SPEED LOGIC - SMT Electrical Specifications, (continued) 800 600 +25C +70C -40C 400 200 0 -1.6 -1.3 -1 -0.7 -0.4 -0.1 CONTROL VOLTAGE VAC (V) [2] Input data rate: 40 Gbps PRBS 223 -1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com 2 HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE 18 18 15 15 FALL TIME (ps) RISE TIME (ps) Fall Time vs. Supply Voltage [1][2][3] 12 9 +25C +70C -40C 6 3 12 9 +25C +70C -40C 6 3 0 -3.47 -3.41 -3.36 -3.3 -3.24 -3.19 0 -3.47 -3.13 -3.41 SUPPLY VOLTAGE Vee (V) 15 10 P-P JITTER (ps) 12 12 9 Rise Time Fall Time 3 -3.24 -3.19 -3.13 +25C +70C -40C 8 6 4 2 0 -1.6 -1.3 -1 -0.7 -0.4 0 -3.47 -0.1 -3.41 CONTROL VOLTAGE VAC (V) -3.36 -3.3 -3.24 -3.19 -3.13 SUPPLY VOLTAGE Vee (V) Input Return Loss vs. Frequency [1][5] Output Return Loss vs. Frequency [1][5] 0 0 -5 -5 RESPONSE (dB) -10 RESPONSE (dB) -3.3 Peak-to-Peak Jitter vs. Supply Voltage [1][2][3][4] 18 6 -3.36 SUPPLY VOLTAGE Vee (V) Rise / Fall Time vs. VAC [1][2][3] RISE/FALL TIME (ps) HIGH SPEED LOGIC - SMT Rise Time vs. Supply Voltage [1][2][3] -10 -15 -20 OUT -15 -20 -25 -30 -25 -30 Data Clock 0 5 10 15 20 25 30 35 FREQUENCY (GHz) 40 45 -35 50 -40 0 5 10 15 20 25 FREQUENCY (GHz) [1] VAC = -0.3V [2] Input data rate: 40 Gbps PRBS 223 -1 [3] Data was taken at single ended output [4] Source jitter was not deembeded [5] Device measured on evaluation board with single-ended time domain gating. 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE 40 Gbps Differential Output Eye Diagram Current Minimum Maximum Total Meas Eye Amp 774 mV 772 mV 774 mV 42 Rise Time 11.78 ps 10.56 ps 12.00 ps 42 Fall Time 11.78 ps 10.56 ps 12.00 ps 42 p-p jitter 3.333 ps 2.889 ps 3.556 ps 42 Time Scale: 10 ps/div Amplitude Scale: 200 mV/div Test Conditions: Vee = -3.3V, VAC = -0.3V Data Input: Single-ended 150 mVp-p 40 Gbps NRZ PRBS 223 -1 pattern Clock Input: Single-ended 150 mVp-p 40 GHz clock signal Timing Diagram tc = HIGH SPEED LOGIC - SMT Measurements I fclock tSH = Setup and Hold Time CPM = Clock Phase Margin = 360° tc - tSH tc Truth Table Input Outputs D C L L -> H L H L -> H H Notes: D = DP - DN C = CKP - CKN Q = OUTP - OUTN Q H - Logic High L - Logic Low Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com 4 HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT Absolute Maximum Ratings Power Supply Voltage (Vee) -3.7V to +0.5V Input Voltage -1.3V to +0.5V Channel Temperature 125°C Continuous Pdiss (T = 85°C) (derate 29.04 mW/°C above 85°C) 1.16 W Thermal Resistance (channel to ground paddle) 34.44 °C/W Storage Temperature -65°C to +125°C Operating Temperature -40°C to +70°C Output Amplitude Control Voltage (VAC) -2.3V to +0.5V ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC841LC4B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H841 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Pin Descriptions Function 1 VAC Description Interface Schematic Output Amplitude Control Voltage. Note: VAC = VC2 on evaluation board. 2, 5, 8, 11, 14, 17, 21 Package Base GND Signal and supply grounds 3, 4 OUTP, OUTN DFF differential (OUTP-OUTN) or single ended (OUTP) outputs 6, 7, 12, 13, 18, 19, 24 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 9, 10 DP, DN DFF differential (DP-DN) or single ended (DP) data inputs 15, 16 CKN, CKP DFF differential (CKP-CKN) or single ended (CKP) clock inputs. 20, 22, 23 Vee Power Supply (-3.3V) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HIGH SPEED LOGIC - SMT Pin Number 6 HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT Evaluation PCB Note: VAC = VC2 on evaluation board. Item Description J1 OUTP J2 OUTN J3 CKP J4 CKN J5 DP J6 DN J9 VAC J11 GND J12 Vee List of Materials for Evaluation PCB 129126 [1] Item Description J1, J2, J5, J6 K Connector J3, J4 2.4mm Connector J9, J11, J12 DC Pin C1, C3 - C5 1000 pF Capacitor, 0402 Pkg. C2 0.1 µF Capacitor, 0402 Pkg. C7, C8 4.7 µF Capacitor, Tantalum U1 HMC841LC4B High Speed Logic, D-Type Flip-Flop PCB [2] 129821 Evaluation Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed metal package base must be connected to Vee. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Arlon 25FR or Rogers 4350 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HMC841LC4B v04.0914 43 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Note: VAC (J9) = VC2 on evaluation board. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or hsl@hittite.com HIGH SPEED LOGIC - SMT Application Circuit 8