HMC858LC4B
v01.0111
Features
The HMC858LC4B is ideal for:
Supports High Data Rates: up to 14 Gbps
• 2:1 Multiplexer up to 14 Gbps
Differential or Single-Ended Operation
• 16G Fiber Channel
Fast Rise and Fall Times: 19 / 20 ps
• Serial Data Transmission up to 14 Gbps
Low Power Consumption: 221 mW typ.
• Redundant Path Switching
Programmable Differential
Output Voltage Swing: 500 - 1300 mVp-p
• Built-in Test
ik C row
ey o a
C nfid ve
or e C
po nt o
ra ial rpo
tio
ra
n
tio
U
n
se
O
nl
y
Typical Applications
Propagation Delay: 87 ps
• Broadband Test & Measurement
Single Supply: -3.3 V
24 Lead Ceramic 4x4 mm SMT Package: 16 mm2
Functional Diagram
General Description
The HMC858LC4B is a 2:1 Selector designed to
sup-port data transmission rates of up to 14 Gbps,
and selector port operation of up to 14 GHz. The
selector routes one of the two differential inputs to the
differential output upon assertion of the proper select
port. The HMC858LC4B also features an output level
control pin, VR, which allows for loss compensation or
for signal level optimization.
ic
All differential input signals to the HMC858LC4B are
terminated with 50 Ohms to ground on-chip, and
may be either AC or DC coupled. The outputs of the
HMC858LC4B may be operated either differentially
or single-ended. Outputs can be connected directly
to a 50 Ohm terminated system, while DC blocking
capacitors may be used if the terminating system is
50 Ohms to a non-ground DC voltage. The HMC858LC4B operates from a single -3.3V DC supply and
is available in a ceramic RoHS-compliant 4x4 mm
SMT package.
M
ig
H
itt
ite
HIGH SPEED LOGIC - SMT
3
14 Gbps, 2:1 DIFFERENTIAL SELECTOR
WITH PROGRAMMABLE OUTPUT VOLTAGE
rD
Electrical Specifications, TA = +25 °C, Vee = -3.3 V
Parameter
Conditions
Fo
Power Supply Voltage
Min.
Typ.
Max
-3.6
-3.3
-3.0
V
Power Supply Current
67
mA
Maximum Data Rate
14
Gbps
Maximum Select Rate
14
GHz
Input Voltage Range
-1.5
0.5
V
Input Differential Range
0.1
2.0
Vp-p
Input Return Loss
Output Amplitude
3-1
Units
Frequency D
H = Positive voltage level
L = Negative voltage level
Notes:
D = DP - DN
S = SP - SN
[3] Device measured on evaluation board with port extensions
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-4
HMC858LC4B
v01.0111
14 Gbps, 2:1 DIFFERENTIAL SELECTOR
WITH PROGRAMMABLE OUTPUT VOLTAGE
Absolute Maximum Ratings
-2.0 V to 0.5 V
Output Signals
-1.5 V to 0.5 V
Junction Temperature
125 °C
Continuous Pdiss (T = 85 °C
(derate 30.0 mW/°C above 85 °C)
1.22 W
Thermal Resistance (Rth j-p)
Worst case device to package paddle
Storage Temperature
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
ik C row
ey o a
C nfid ve
or e C
po nt o
ra ial rpo
tio
ra
n
tio
U
n
se
O
nl
y
-3.75 V to +0.5 V
Input Signals
32.8 °C/W
-65 °C to +150 °C
Operating Temperature
-40 to +85 °C
M
ic
Outline Drawing
Fo
rD
ig
H
itt
ite
HIGH SPEED LOGIC - SMT
3
Power Supply Voltage (Vee)
3-5
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO Vee.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC858LC4B
v01.0111
14 Gbps, 2:1 DIFFERENTIAL SELECTOR
WITH PROGRAMMABLE OUTPUT VOLTAGE
Pin Descriptions
Description
1, 6, 8, 11, 13, 18
GND
Signal Grounds
2, 3,
4, 5
AP, AN,
BP, BN
7, 12, 14, 15, 22
N/C
9, 10
SP, SN
16, 17
ON, OP
Interface Schematic
Differential Inputs: Current Mode Logic (CML)
referenced to positive supply.
No connection necessary. These pins may be connected to
RF/DC ground without affecting performance.
Differential Select Inputs: Current Mode Logic (CML)
referenced to positive supply.
M
ic
Differential Outputs: Current Mode Logic (CML)
referenced to positive supply.
GND
ite
19, 24
Vee
Supply Grounds
These pins and the exposed paddle must be
connected to the negative voltage supply.
Fo
rD
ig
H
itt
20, 23
Package Base
3
HIGH SPEED LOGIC - SMT
Function
ik C row
ey o a
C nfid ve
or e C
po nt o
ra ial rpo
tio
ra
n
tio
U
n
se
O
nl
y
Pin Number
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-6
HMC858LC4B
v01.0111
14 Gbps, 2:1 DIFFERENTIAL SELECTOR
WITH PROGRAMMABLE OUTPUT VOLTAGE
ig
H
itt
ite
M
ic
HIGH SPEED LOGIC - SMT
3
ik C row
ey o a
C nfid ve
or e C
po nt o
ra ial rpo
tio
ra
n
tio
U
n
se
O
nl
y
Evaluation PCB
rD
List of Materials for Evaluation PCB 126572 [1]
Description
J1 - J6, J9, J10
PCB Mount SMA RF Connectors
J15 - J18
DC Pin
JP1
C1, C2
C3 - C5
R1
Fo
Item
0.1” Header with Shorting Jumper
4.7 µF Capacitor, Tantalum
100 pF Capacitor, 0603 Pkg.
10 Ohm Resistor, 0603 Pkg.
U1
HMC858LC4B 2:1 Differential Selector
PCB [2]
126570-3 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
3-7
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to Vee. A sufficient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request. Install jumper on JP1 to short VR to GND
for normal operation.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC858LC4B
v01.0111
14 Gbps, 2:1 DIFFERENTIAL SELECTOR
WITH PROGRAMMABLE OUTPUT VOLTAGE
HIGH SPEED LOGIC - SMT
3
Fo
rD
ig
H
itt
ite
M
ic
ik C row
ey o a
C nfid ve
or e C
po nt o
ra ial rpo
tio
ra
n
tio
U
n
se
O
nl
y
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-8