HMC892LP5E
v00.0910
Typical Applications
Features
The HMC892LP5E is ideal for:
Fast Tuning Response; 200 ns
• Test & Measurement Equipment
Excellent Wideband Rejection; >30 dB
• Military RADAR & EW/ECM
Single Chip Replacement
for Mechanically Tuned Designs
• SATCOM & Space
• Industrial & Medical Equipment
32 Lead 5x5 mm SMT Package
General Description
TE
Functional Diagram
LE
The HMC892LP5E is a MMIC band pass filter which
features a user selectable passband frequency. The
3 dB filter bandwidth is approximately 9%. The 20
dB filter bandwidth is approximately 23%. The center frequency can be varied between 4 and 7.7 GHz
by applying an analog tune voltage between 0
and 14V. This tunable filter can be used as a much
smaller alternative to physically large switched filter
banks and cavity tuned filters. The HMC892LP5E has
excellent microphonics due to the monolithic design,
and provides a dynamically adjustable solution in
advanced communications applications.
B
SO
FILTERS - TUNABLE - SMT
3
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
Electrical Specifications, TA = +25°C, Vfctl = Vbwctl Unless Otherwise Stated
Parameter
Fcenter Tuning Range
Min.
Typ.
4
3 dB Bandwidth
Max.
Units
7.7
GHz
9
%
0.9*Fcenter
GHz
High Side Rejection Frequency (Rejection >20 dB)
1.13*Fcenter
GHz
Re-entry Frequency (Rejection 20 dB)
3 dB Bandwidth Control (Vbwctl)
±3
%
Insertion Loss
8
dB
Return Loss
9
Maximum Input Power for Linear Operation
Frequency Control Voltage (Vfctl)
0
Source/Sink Current (Ifctl)
Bandwidth Control Voltage (Vbwctl)
dB
10
0
Source/Sink Current (Ibwctl)
dBm
14
V
±1
mA
14
V
±1
mA
Residual Phase Noise [1] (1 MHz Offset)
-165
dBc/Hz
Fcenter Drift Rate
-0.65
MHz/°C
Tuning Characteristics [2]
tFULLBAND (0% Vfctl to 90% RF)
200
ns
[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.
[2] Tuning speed is dependent on driver circuit. Data measured with a high speed op-amp driver and includes driver slew rate delay.
3-1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
Broadband Insertion Loss vs.
Control Voltages, Vfctl = Vbwctl
0V
7V
14V
-5
RETURN LOSS (dB)
-20
-30
-40
-50
-10
S11
S22
-15
-20
TE
INSERTION LOSS (dB)
-10
0V
-25
-60
7V
14V
-30
-70
0
5
10
15
20
25
0
30
FREQUENCY (GHz)
5
10
15
20
25
30
8
9
FREQUENCY (GHz)
Insertion Loss vs.
Control Voltages, Vfctl = Vbwctl
LE
Return Loss vs.
Control Voltages, Vfctl = Vbwctl
0
0
-2
-6
-10
-12
-14
-16
-18
-20
3
B
SO
0V
7V
14V
-8
4
5
6
7
8
RETURN LOSS (dB)
-5
-4
-10
-15
7V
0V
14V
-20
S11
S22
-25
-30
3
9
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
Insertion Loss vs.
Temperature, Vfctl = Vbwctl = 7V
FILTERS - TUNABLE - SMT
0
0
INSERTION LOSS (dB)
3
Broadband Return Loss vs.
Control Voltages, Vfctl = Vbwctl
O
Return Loss vs.
Temperature, Vfctl = Vbwctl = 7V
0
0
-5
-4
-6
RETURN LOSS (dB)
INSERTION LOSS (dB)
-2
+25C
+85C
-40C
-8
-10
-12
-14
-16
S11
-10
S22
-15
-20
+25C
+85C
-40C
-25
-18
-20
-30
3
4
5
6
7
FREQUENCY (GHz)
8
9
3
4
5
6
7
8
9
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-2
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
3
Broadband Return Loss vs.
Vbwctl, Vfctl = 7V
Broadband Insertion Loss vs.
Vbwctl, Vfctl = 7V
0
Vbwctl=4V
Vbwctl=7V
Vbwctl=10V
-5
-30
-40
-50
-60
-10
-15
S11
S22
Vbwctl=10V
-20
-25
Vbwctl=7V
-30
-70
-80
-35
0
5
10
15
20
25
30
0
FREQUENCY (GHz)
5
10
15
20
30
LE
Return Loss vs. Vbwctl, Vfctl = 7V
0
0
-2
Vbwctl=4V
Vbwctl=7V
Vbwctl=10V
-4
-5
-8
-10
-12
-14
-20
3
B
SO
-6
-18
4
5
6
7
8
Vbwctl=4V
-10
Vbwctl=7V
-15
Vbwctl=10V
-20
S11
S22
-25
-30
3
9
4
5
6
7
FREQUENCY (GHz)
Center Frequency vs.
Temperature, Vfctl = Vbwctl
Insertion Loss vs.
Temperature, Vfctl = Vbwctl
O
FREQUENCY (GHz)
9
8
-2
+25C
+85C
-40C
7
8
9
0
INSERTION LOSS (dB)
CENTER FREQUENCY (GHz)
25
FREQUENCY (GHz)
Insertion Loss vs. Vbwctl, Vfctl = 7V
-16
6
5
4
+25C
+85C
-40C
-4
-6
-8
-10
-12
-14
3
-16
0
2
4
6
Vfctl (V)
3-3
Vbwctl=4V
TE
RETURN LOSS (dB)
-20
RETURN LOSS (dB)
INSERTION LOSS (dB)
-10
INSERTION LOSS (dB)
FILTERS - TUNABLE - SMT
0
8
10
12
14
0
2
4
6
8
10
12
14
Vfctl (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
Maximum Return Loss in a 2 dB Bandwidth
vs. Temperature, Vfctl = Vbwctl
3 dB Bandwidth vs. Temperature,
Vfctl = Vbwctl
+25C
+85C
-40C
RETURN LOSS (dB)
10
9
-4
-6
-8
TE
8
-10
7
-12
6
0
2
4
6
8
10
12
0
14
2
4
6
8
10
12
14
12
14
Vfctl (V)
Vfctl (V)
1
High Side Rejection Ratio vs.
Temperature, Vfctl = Vbwctl [1]
LE
Low Side Rejection Ratio vs.
Temperature, Vfctl = Vbwctl [1]
1.3
+25C
+85C
-40C
0.95
0.9
0.85
0.8
0
B
SO
F20dB TO Fcenter RATIO
+25C
+85C
-40C
-2
2
4
6
8
10
12
F20dB To Fcenter RATIO
BANDWIDTH (%)
11
1.2
1.15
1.1
1.05
1
14
0
Vfctl (V)
Tuning Sensitivity vs.
Temperature, Vfctl = Vbwctl
2
4
6
8
10
Vfctl (V)
O
Group Delay
600
2.5
500
0V
GROUP DELAY (ns)
2
400
300
+25C
+85C
-40C
200
+25C
+85C
-40C
1.25
FILTERS - TUNABLE - SMT
0
12
SENSITIVITY (MHz/V)
3
7V
1.5
14V
1
0.5
100
0
0
2
4
6
Vfctl (V)
8
10
12
14
0
2
3
4
5
6
7
FREQUENCY (GHz)
8
9
10
[1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to ƒcenter
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-4
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
3
3 dB Bandwidth vs. Bandwidth Control
Insertion Loss vs. Bandwidth Control
0
14
INSERTION LOSS (dB)
Vbwctl=Vfctl
Vbwctl=Vfctl+3V
Vbwctl=Vfctl-3V
12
10
-5
-10
TE
8
6
4
2
Vbwctl=Vfctl
Vbwctl=Vfctl+3V
Vbwctl=Vfctl-3V
-15
-20
0
2
4
6
8
10
12
14
0
Vfctl (V)
2
4
6
10
12
14
High Side Rejection Ratio vs. Bandwidth
Control [1]
LE
Low Side Rejection Ratio vs. Bandwidth
Control [1]
1
1.3
0.95
0.85
0.8
B
SO
0.9
Vbwctl=Vfctl
Vbwctl=Vfctl +3V
Vbwctl=Vfctl -3V
0.75
0.7
0
2
4
6
8
10
12
1.2
1.15
1.1
1.05
1
14
0
2
4
6
10
12
14
Input IP3 vs. Power Input
Vfctl = Vbwctl
35
0
Vbwctl=Vfctl
Vbwctl=Vfctl+3V
Vbwctl=Vfctl-3V
-2
8
Vfctl (V)
O
Maximum Return Loss in a 2 dB
Bandwidth vs. Bandwidth Control
Vbwctl=Vfctl
Vbwctl=Vfctl+3V
Vbwctl=Vfctl-3V
1.25
Vfctl (V)
30
-4
IP3 (dBm)
RETURN LOSS (dB)
8
Vfctl (V)
F20dB TO Fcenter RATIO
BANDWIDTH (%)
16
F20dB TO Fcenter RATIO
FILTERS - TUNABLE - SMT
18
-6
25
20
Pin = 0
Pin = 5
Pin = 10
Pin = 15
Pin = 20
-8
15
-10
10
-12
0
2
4
6
Vfctl (V)
8
10
12
14
3.5
4.5
5.5
6.5
7.5
8.5
FREQUENCY (GHz)
[1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to ƒcenter
3-5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
0.5V
5.8V
13.0V
-140
Frequency Control Voltage (Vfctl)
-0.5 to +15V
Bandwidth Control Voltage (Vbwctl)
-0.5 to +15V
RF Power Input
26 dBm
Storage Temperature
-65 to +150 °C
ESD Rating (HBM)
Class 1B
-150
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TE
RESIDUAL PHASE NOISE (dBc/Hz)
-120
-130
3
Absolute Maximum Ratings
-160
-170
1.0e+2
1.0e+3
1.0e+4
1.0e+5
1.0e+6
Reliability Information
1.0e+7
Junction Temperature to Maintain
1 Million Hour MTTF
150 °C
Nominal Junction Temperature
(T= 85 °C and Pin = 10 dBm)
90 °C
Operating Temperature
-40 to +85 °C
LE
OFFSET FREQUENCY (Hz)
O
B
SO
Outline Drawing
FILTERS - TUNABLE - SMT
Residual Phase Noise
Vfctl = Vbwctl
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. Pin BURR LENGTH SHALL BE 0.15mm MAXIMUM.
Pin BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC892LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H892
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-6
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
Pin Descriptions
Description
1 - 4, 7 - 11, 13
15 - 18, 21 - 32
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
5, 20
GND
These pins and exposed paddle
must be connected to RF/DC ground.
6
RFIN
This pin is DC coupled and matched to 50 Ohms.
External voltage must not be applied to this pin.
12
Vfctl
Center frequency control voltage.
14
Vbwctl
Interface Schematic
TE
Function
LE
Pin Number
Bandwidth control voltage.
B
SO
FILTERS - TUNABLE - SMT
3
19
RFOUT
This pin is DC coupled and matched to 50 Ohms.
External voltage must not be applied to this pin.
O
Application Circuit
3-7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC892LP5E
v00.0910
FILTER - TUNABLE, BAND PASS SMT
4.0 - 7.7 GHz
TE
LE
B
SO
FILTERS - TUNABLE - SMT
3
Evaluation PCB
O
List of Materials for Evaluation PCB 128531 [1]
Item
Description
J1, J2
SMA - SRI
J3, J4
SMA - Johnson
C1, C2
100 pF Capacitor, 0402 Pkg.
U1
HMC892LP5E Filter
PCB [2]
127338 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 25FR
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohms impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-8