LT1004IZ-2.5#PBF

LT1004 Micropower Voltage Reference Features Description Guaranteed ± 4mV Initial Accuracy LT1004-1.2 nn Guaranteed ±20mV Accuracy LT1004-2.5 nn Guaranteed 10µA Operating Current nn Guaranteed Temperature Performance nn Operates up to 20mA nn Very Low Dynamic Impedance The LT®1004 micropower voltage reference is a 2-terminal bandgap reference diode designed to provide high accuracy and excellent temperature characteristics at very low operating currents. Optimization of the key parameters in the design, processing and testing of the device results in accuracy specifications previously attainable only with selected units. Below is a distribution plot of reference voltage for a typical lot of LT1004-1.2. Virtually all of the units fall well within the prescribed limits of ±4mV. nn Applications Portable Meter References Portable Test Instruments nn Battery-Operated Systems nn Current Loop Instrumentation nn The LT1004 is a pin-for-pin replacement for the LM185/LM385 series of references with improved accuracy specifications. More important, the LT1004 is an attractive device for use in systems where accuracy was previously obtained at the expense of power consumption and trimming. nn For a low drift micropower reference with guaranteed temperature coefficient, see the LT1034 data sheet. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Analog Devices, Inc. All other trademarks are the property of their respective owners. Typical Application Typical Distribution of Reference Voltage (LT1004-1.2) Micropower Cold Junction Compensation for Thermocouples 200 160 1684Ω 5k AT 25°C† + LT1004-1.2 186Ω 100 80 60 40 COMPENSATES WITHIN ±1°C FROM 0°C TO 60°C 1.2375 1.237 1.2365 1.236 1.2355 1.235 * QUIESCENT CURRENT ≅ 15A † YELLOW SPRINGS INST. CO. PART #44007 20 1.2345 – 1.234 R1 233k 299k 300k 2.1M 120 1.2335 THERMOCOUPLE TYPE J K T S + – 1.8k 140 1.233 3V LITHIUM NUMBER OF PARTS R1 1.2325 100k 1200 PARTS TA = 25°C 180 * 1004 TA02 1004 TA01 1004fc For more information www.linear.com/LT1004 1 LT1004 Absolute Maximum Ratings (Note 1) Reverse Breakdown Current ...................................30mA Forward Current .................................................... 10mA Storage Temperature Range.................. –65°C to 150°C Lead Temperature (Soldering, 10 sec) .................. 300°C Operating Temperature Range LT1004M ........................................... –55°C to 125°C LT1004I ............................................... –40°C to 85°C LT1004C ................................................. 0°C to 70°C Pin Configuration TOP VIEW BOTTOM VIEW 1 2 NC 1 8 VOUT NC 2 7 NC NC 3 6 VOUT NC 5 (DO NOT USE) GND 4 H PACKAGE 2-LEAD TO-46 METAL CAN S8 PACKAGE 8-LEAD PLASTIC SO TJMAX = 150°C, θJA = 440°C/W, θJC = 80°C/W Order Information TJMAX = 150°C, θJA = 120°C/W BOTTOM VIEW Z PACKAGE 3-LEAD PLASTIC TO-92 TJMAX = 150°C, θJA = 160°C/W http://www.linear.com/product/LT1004#orderinfo LEAD FREE FINISH TAPE AND REEL PART MARKING PACKAGE DESCRIPTION TEMPERATURE RANGE LT1004MH-2.5#PBF LT1004MH-2.5#TRPBF LT1004CS8-1.2#PBF LT1004CS8-1.2#TRPBF 0412 2-Lead TO-46 Metal Can –55°C to 125°C 8-Lead Plastic S0 0°C to 70°C LT1004CS8-2.5#PBF LT1004CS8-2.5#TRPBF 0425 8-Lead Plastic S0 0°C to 70°C LT1004IS8-1.2#PBF LT1004IS8-1.2#TRPBF 0412I 8-Lead Plastic S0 –40°C to 85°C LT1004IS8-2.5#PBF LT1004IS8-2.5#TRPBF 0425I 8-Lead Plastic S0 –40°C to 85°C LT1004CZ-1.2#PBF LT1004CZ-1.2#TRPBF 3-Lead Plastic TO-92 0°C to 70°C LT1004CZ-2.5#PBF LT1004CZ-2.5#TRPBF 3-Lead Plastic TO-92 0°C to 70°C LT1004IZ-1.2#PBF LT1004IZ-1.2#TRPBF 3-Lead Plastic TO-92 –40°C to 85°C LT1004IZ-2.5#PBF LT1004IZ-2.5#TRPBF 3-Lead Plastic TO-92 –40°C to 85°C Consult LTC Marketing for parts specified with wider operating temperature ranges. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/. Some packages are available in 500 unit reels through designated sales channels with #TRMPBF suffix. 2 1004fc For more information www.linear.com/LT1004 LT1004 Electrical Characteristics The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. C, I SUFFIXES SYMBOL PARAMETER CONDITIONS VZ Reverse Breakdown Voltage IR = 100µA LT1004M: – 55°C ≤ TA ≤ 125°C LT1004C: 0°C ≤ TA ≤ 70°C LT1004I: –40°C ≤ TA ≤ 85°C ∆VZ ∆Temp Average Temperature Coefficient IMIN ≤ IR ≤ 20mA (Note 3) IMIN Minimum Operating Current ∆VZ ∆IR Reverse Breakdown Voltage Change with Current MIN 1.231 1.235 1.230 1.235 1.230 ● 1.220 ● 1.225 ● 1.220 1mA ≤ IR ≤ 20mA IR = 100µA 8 H SUFFIX MAX MIN TYP MAX UNITS 1.239 1.245 1.245 1.245 2.480 2.460 2.470 2.460 2.500 2.500 2.500 2.500 2.520 2.535 2.530 2.530 V V V V 20 20 20 µA ● 1.0 1.5 mV mV ● 10 20 10 20 mV mV 0.6 1.5 Ω Ω Reverse Dynamic Impedance en ∆VZ ∆Time Wide Band Noise (RMS) IR = 100µA, 10Hz ≤ f ≤ 10kHz 60 120 µV Long Term Stability IR = 100µA, TA = 25°C ± 0.1°C 20 20 ppm/kHr ● 0.6 1.5 12 rZ Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. 0.2 10 ppm/°C 1.0 1.5 ● IMIN ≤ IR ≤ 1mA TYP 0.2 Note 2: All specifications are for TA = 25°C unless otherwise noted. Note 3: Selected devices with guaranteed maximum temperature coefficient are available upon request. For MIL-STD components, please refer to LTC883C data sheet for test listing and parameters. 1004fc For more information www.linear.com/LT1004 3 LT1004 Typical Performance Characteristics Reverse Characteristics Reverse Voltage Change 10 1 0.1 0 0.2 0.4 0.6 0.8 1.0 REVERSE VOLTAGE (V) 1.2 12 8 4 Temperature Drift DYNAMIC IMPEDANCE (Ω) DYNAMIC IMPEDANCE (Ω) REVERSE VOLTAGE (V) 10k –55°C TO 125°C f = 25Hz 10 1 0.1 0.01 NOISE (nV/Hz) NOISE (nV/Hz) 40 100 10 100k 1004 G07 100 10k 1k FREQUENCY (Hz) 100k 1M 1004 G06 Reponse Time 100µA R 1.5 C 30 20 1k 10k FREQUENCY (Hz) 10 RC LOW PASS 60 200 4 1 IR = 100µA 50 100 10 100 VOLTAGE (V) IR = 100µA TA = 25°C 10 100 Filtered Output Noise 70 500 0 TA = 25°C IR = 100µA 1004 G05 Noise Voltage 300 Reverse Dynamic Impedance 1k 0.1 0.1 1 10 REVERSE CURRENT (mA) 1004 G04 400 100 1004 G11 Reverse Dynamic Impedance –55 –35 –15 5 25 45 65 85 105 125 TEMPERATURE (°C) 600 0.1 1 10 FORWARD CURRENT (mA) 100 1 10 0.1 REVERSE CURRENT (mA) 1.225 700 0.4 0 0.01 100 1.230 0.8 1004 G02 1.245 1.235 TA = 25°C 0 1004 G01 1.240 Forward Characteristics –55°C TO 125°C –4 0.01 1.4 1.2 FORWARD VOLTAGE (V) 16 –55°C TO 125°C OUTPUT VOLTAGE CHANGE (mV) REVERSE CURRENT (µA) 100 0 100 OUTPUT 1.0 36k 0.5 VIN 0 5V 1k 10k FREQUENCY (Hz) 100k 1004 G08 VOUT 0 INPUT 0 100 TIME (µs) 500 600 1004 G09 1004fc For more information www.linear.com/LT1004 LT1004 Performance Characteristics Reverse Characteristics 1.2 10 1 0.1 Forward Characteristics –55°C TO 125°C FORWARD VOLTAGE (V) REVERSE CURRENT (µA) 100 0 0.5 1.0 1.5 2.0 REVERSE VOLTAGE (V) 2.5 TA = 25°C 0.8 0.4 0 0.01 3.0 0.1 1 10 FORWARD CURRENT (mA) 100 1004 G11 1004 G10 Temperature Drift 1000 Reverse Dynamic Impedance 2.510 2.505 2.500 2.495 2.490 DYNAMIC IMPEDANCE (Ω) DYNAMIC IMPEDANCE (Ω) REFERENCE VOLTAGE (V) 2.515 100 10 1 2.485 Reverse Dynamic Impedance 10k f = 25Hz –55°C TO 125°C TA = 25°C IR = 100µA 1k 100 10 1 2.480 0.1 0.01 –55 –35 –15 5 25 45 65 85 105 125 TEMPERATURE (°C) 1 10 0.1 REVERSE CURRENT (mA) 0.1 100 10 100 10k 1k FREQUENCY (Hz) 100k 1004 G13 1M 1004 G14 1004 G12 Noise Voltage IR = 100µA 1200 INTEGRATED NOISE (µV) NOISE (nV/Hz) IR = 100µA 100 1000 800 600 400 80 60 100µA R 3 RC LOW PASS C 40 20 200 0 Reponse Time Filtered Output Noise 120 VOLTAGE (V) 1400 10 100 1k 10k FREQUENCY (Hz) 100k 1004 G15 0 100 2 1 100k 1004 G16 VIN 24k VOUT 0 5V 1k 10k CUTOFF FREQUENCY (Hz) OUTPUT 0 INPUT 100 TIME (µs) 500 1004 G17 1004fc For more information www.linear.com/LT1004 5 LT1004 Typical Applications Variable Output Supply High Stability 5V Regulator LT338A LT338A VIN ≥ 8V 1µF IN 5V OUT ADJ + 300Ω 1% LT1004-2.5 VIN VIN + 1µF VOUT VOUT ADJ 120Ω + 10µF LT1004-1.2 100Ω 1% 1004 TA08 2k R1 1004 TA03 V – – 1V R1 ≤ 0.015 Constant Gain Amplifier Over Temperature V– Micropower 5V Reference V + ≥ 5V 250k 250k VIN 9V to 15V LM334 R OUTPUT 5.6k 3 200k LT1004-1.2 6 LM4250 2 2N3904 7 + INPUT 8 – 4 LT1004-1.2 Ground Referenced Current Source 15V BATTERY OUTPUT 133k 1% 2k* 12V 3 2 + 7 6 LM4250 – LT1004-1.2 LT1004-1.2 LO = BATTERY LOW R 8 4 2 10M 1004 TA14 3 † R1 SETS TRIP POINT, 60.4k PER CELL FOR 1.8V/CELL 7 – LT1007C + 4 IOUT 6 3.01M 1% 1004 TA13 1004 TA07 Lead Acid Low-Battery Detector 1M 150pF 22M 1M 1% 60k V – ≤ –5V R1† 1% VOUT 5V –5V 6 1004 TA04 1.235 IOUT = R 2V R≈ IOUT + 10µA *MAY BE INCREASED FOR SMALL OUTPUT CURRENTS 1004fc For more information www.linear.com/LT1004 LT1004 Typical Applications VPP Generator for Eproms –– No Trim Required 1.2V Reference from 1.5V Battery 100pF 1.5V* 24V 24V 600µs RC PER INTEL SPEC 1 22k 3 12k 2 0.05µF LT1004-1.2 10k + 7 LM301A – 3k 6 1.235V 21V OUT LT1004-1.2 4 16.9k* –5V 2N3904 TTL INPUT 8 *OUTPUT REGULATES DOWN TO 1.285V FOR IOUT = 0 1.05k* 56k *1% METAL FILM RESISTORS –5V Micropower Reference from 9V Battery 1004 TA15 2.5V Reference 9V 1004 TA12 Low Noise Reference VIN ≥ 5V 5V 510k 100µA 50k 1.235V 22Ω 2.500V LT1004-1.2 LT1004-1.2 LT1004-2.5 1004 TA11 + OUTPUT 50µF 1004 TA10 1004 TA09 Schematic Diagrams LT1004-1.2 LT1004-2.5 + 7.5k + 7.5k Q13 Q3 200k Q3 20pF 20pF 200k 20pF Q11 Q1 20pF Q11 Q1 50k 600k Q12 Q4 Q12 Q4 Q13 50k 600k Q10 Q10 300k 300k Q5 Q9 Q14 Q8 Q6 500k Q5 500Ω Q8 Q6 60k 500k – 1004-1.2 SD 500k Q9 Q14 500Ω 500k 60k – 1004-2.5 SD 1004fc For more information www.linear.com/LT1004 7 LT1004 Package Description Please refer to http://www.linear.com/product/LT1004#packaging for the most recent package drawings. H Package 2-Lead and 3-Lead TO-46 Metal Can (Reference LTC DWG # 05-08-1340) .209 – .219 (5.309 – 5.537) .178 – .195 (4.521 – 4.953) REFERENCE PLANE .085 – .105 (2.159 – 2.667) .500 (12.700) MIN .025 (0.635) MAX SEATING* PLANE .016 – .019** (0.406 – 0.483) DIA .050 (1.270) TYP .100 (2.540) TYP .050 (1.270) TYP PIN 1 FOR 3-LEAD PACKAGE ONLY .036 – .046 (0.914 – 1.168) 45° .028 – .048 (0.711 – 1.219) H02/03(TO-46) 0801 *LEAD DIAMETER IS UNCONTROLLED BETWEEN THE REFERENCE PLANE AND .050" BELOW THE REFERENCE PLANE .016 – .024 **FOR SOLDER DIP LEAD FINISH, LEAD DIAMETER IS (0.406 – 0.610) 8 1004fc For more information www.linear.com/LT1004 LT1004 Package Description Please refer to http://www.linear.com/product/LT1004#packaging for the most recent package drawings. S8 Package 8-Lead Plastic Small Outline (Narrow .150 Inch) (Reference LTC DWG # 05-08-1610 Rev G) .189 – .197 (4.801 – 5.004) NOTE 3 .045 ±.005 .050 BSC 8 .245 MIN .160 ±.005 .010 – .020 × 45° (0.254 – 0.508) 2 .053 – .069 (1.346 – 1.752) 0°– 8° TYP .016 – .050 (0.406 – 1.270) 5 .150 – .157 (3.810 – 3.988) NOTE 3 1 RECOMMENDED SOLDER PAD LAYOUT .008 – .010 (0.203 – 0.254) 6 .228 – .244 (5.791 – 6.197) .030 ±.005 TYP NOTE: 1. DIMENSIONS IN 7 .014 – .019 (0.355 – 0.483) TYP INCHES (MILLIMETERS) 2. DRAWING NOT TO SCALE 3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm) 4. PIN 1 CAN BE BEVEL EDGE OR A DIMPLE 3 4 .004 – .010 (0.101 – 0.254) .050 (1.270) BSC SO8 REV G 0212 1004fc For more information www.linear.com/LT1004 9 LT1004 Package Description Please refer to http://www.linear.com/product/LT1004#packaging for the most recent package drawings. Z Package 3-Lead Plastic TO-92 (Similar to TO-226) (Reference LTC DWG # 05-08-1410 Rev C) .180 ± .005 (4.572 ± 0.127) .060 ± .005 (1.524± 0.127) DIA .90 (2.286) NOM .180 ± .005 (4.572 ± 0.127) .500 (12.70) MIN .050 UNCONTROLLED (1.270) LEAD DIMENSION MAX .016 ± .003 (0.406 ± 0.076) .050 (1.27) BSC 5° NOM .015 ± .002 (0.381 ± 0.051) Z3 (TO-92) 1008 REV C .098 +.016/–.04 (2.5 +0.4/–0.1) 2 PLCS BULK PACK TO-92 TAPE AND REEL REFER TO TAPE AND REEL SECTION OF LTC DATA BOOK FOR ADDITIONAL INFORMATION .060 ± .010 (1.524 ± 0.254) 3 2 1 .140 ± .010 (3.556 ± 0.127) 10° NOM 10 1004fc For more information www.linear.com/LT1004 LT1004 Revision History (Revision history begins at Rev C) REV DATE DESCRIPTION C 07/17 Added Web Links PAGE NUMBER All Package Order Information Updated: TJMAX changed to 150°C for S8 and TO-92 package. Thermal resistance (Junction to Ambient) changed to 120°C/W 2 1004fc Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. For more information www.linear.com/LT1004 11 LT1004 Typical Application 0°C to 100°C Linear Output Thermometer NETWORK DETAIL YSI 44201 BRN GRN 6250Ω RT NETWORK YSI 44201 15V 2.7k 5% LT1004-1.2 RED 10k 0.1% 4 3 3.2k – 1/2 LT1002 2765Ω 0.1% 13 10 + 11 10k 0.1% + – 1/2 LT1002 10k 0.1% 6 VOUT 0V TO10V 0°C TO 100°C 1004 TA05 168.3Ω 0.1% Low Temperature Coefficient 2-Terminal Current Source LM334 R 6.8k R ≤ 5k LT1004-1.2 IOUT ≈ 1.3V R 1004 TA06 Related Parts PART NUMBER DESCRIPTION COMMENTS LT1634 Micropower Precision Shunt Reference 10µA Operating Current, 10ppm/°C Maximum Drift, 0.05% Initial Accuracy LT1460S3-2.5 Micropower Series Reference in SOT-23 100µA Operating Current, 20ppm/°C Maximum Drift, 0.2% Initial Accuracy LT1790 Precision Micropower LDO Reference in SOT-23 12 10ppm/°C Max Drift, 0.05% Initial Accuracy 1004fc LT 0717 REV C • PRINTED IN USA www.linear.com/LT1004  LINEAR TECHNOLOGY CORPORATION 1985