LTC1863L/LTC1867L
Micropower, 3V,
12-/16-Bit, 8-Channel
175ksps ADCs
DESCRIPTION
FEATURES
Sample Rate: 175ksps
nn 16-Bit No Missing Codes and ±3LSB Max INL
nn 8-Channel Multiplexer with:
nn Single Ended or Differential Inputs and
nn Unipolar or Bipolar Conversion Modes
nn SPI/MICROWIRE Serial I/O
nn 2.7V Guaranteed Supply Voltage
nn Pin Compatible with LTC1863/LTC1867
nn True Differential Inputs
nn On-Chip or External Reference
nn Low Power: 750µA at 175ksps, 300µA at 50ksps
nn Sleep Mode
nn Automatic Nap Mode Between Conversions
nn 16-Pin Narrow SSOP Package
The LTC®1863L/LTC1867L are pin compatible, 8-channel
12-/16-bit A/D converters with serial I/O and an internal
reference.
nn
The 8-channel input multiplexer can be configured for
either single-ended or differential inputs and unipolar or
bipolar conversions (or combinations thereof). The ADCs
convert 0V to 2.5V unipolar inputs or ±1.25V bipolar
inputs. The ADCs typically draw only 750µA from a single
2.7V supply. The automatic nap and sleep modes benefit
power sensitive applications.
The LTC1867L’s DC performance is outstanding with a
±3LSB INL specification and 16-bit no missing codes over
temperature.
nn
Housed in a compact, narrow 16-pin SSOP package, the
LTC1863L/LTC1867L can be used in space-sensitive as
well as low power applications.
nn
All registered trademarks and trademarks are the property of their respective owners.
APPLICATIONS
Industrial Process Control
High Speed Data Acquisition
nn Battery Operated Systems
nn Multiplexed Data Acquisition Systems
nn Imaging Systems
BLOCK DIAGRAM
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM
LTC1863L/LTC1867L
1
2
15
3
4
5
6
14
ANALOG
INPUT
MUX
+
–
12-/16-BIT
175ksps
ADC
SERIAL
PORT
13
12
11
7
8
16
10
VDD
2.0
GND
1.5
SDI
SCK
CS/CONV
VREF
INTERNAL
1.25V REF
VDD = 2.7V
fSAMPLE = 175ksps
1.0
SDO
INL (LSB)
CH0
Integral Nonlinearity vs Output Code
(LTC1867L)
0.5
0
–0.5
–1.0
–1.5
9
1863L7L BD
REFCOMP
–2.0
0
16384
32768
49152
65536
OUTPUT CODE
1863L7L G01
1863l7lfe
For more information www.linear.com/LTC1863L
1
LTC1863L/LTC1867L
ABSOLUTE MAXIMUM RATINGS
PIN CONFIGURATION
(Notes 1, 2)
Supply Voltage (VDD).................................... –0.3V to 6V
Analog Input Voltage
CH0-CH7/COM (Note 3)............– 0.3V to (VDD + 0.3V)
VREF, REFCOMP (Note 4).......... –0.3V to (VDD + 0.3V)
Digital Input Voltage (SDI, SCK, CS/CONV)
(Note 4).................................................. –0.3V to 10V
Digital Output Voltage (SDO)........ –0.3V to (VDD + 0.3V)
Power Dissipation............................................... 500mW
Operating Temperature Range
LTC1863LC/LTC1867LC/LTC1867LAC...... 0°C to 70°C
LTC1863LI/LTC1867LI/LTC1867LAI......–40°C to 85°C
Storage Temperature Range................... –65°C to 150°C
Lead Temperature (Soldering, 10 sec).................... 300°C
ORDER INFORMATION
TOP VIEW
CH0 1
16 VDD
CH1 2
15 GND
CH2 3
14 SDI
CH3 4
13 SDO
CH4 5
12 SCK
CH5 6
11 CS/CONV
CH6 7
10 VREF
CH7/COM 8
9
REFCOMP
GN PACKAGE
16-LEAD NARROW PLASTIC SSOP
TJMAX = 110°C, θJA = 95°C/W
Consult ADI Marketing for parts specified with wider operating temperature
ranges.
http://www.linear.com/product/LTC1863L#orderinfo
LEAD FREE FINISH
TAPE AND REEL
PART MARKING*
PACKAGE DESCRIPTION
TEMPERATURE RANGE
LTC1863LCGN#PBF
LTC1863LCGN#TRPBF
1863L
16-Lead Narrow Plastic SSOP
0°C to 70°C
LTC1863LIGN#PBF
LTC1863LIGN#TRPBF
1863L
16-Lead Narrow Plastic SSOP
–40°C to 85°C
LTC1867LCGN#PBF
LTC1867LCGN#TRPBF
1867L
16-Lead Narrow Plastic SSOP
0°C to 70°C
LTC1867LIGN#PBF
LTC1867LIGN#TRPBF
1867L
16-Lead Narrow Plastic SSOP
–40°C to 85°C
LTC1867LACGN#PBF
LTC1867LACGN#TRPBF
1867L
16-Lead Narrow Plastic SSOP
0°C to 70°C
LTC1867LAIGN#PBF
LTC1867LAIGN#TRPBF
1867L
16-Lead Narrow Plastic SSOP
–40°C to 85°C
Consult ADI Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/. Some packages are available in 500 unit reels through
designated sales channels with #TRMPBF suffix.
CONVERTER
CHARACTERISTICS l denotes the specifications which apply over the full operating
The
temperature range, otherwise specifications are at TA = 25°C. VDD = 2.7V, external VREF = 1.25V (Notes 5, 6)
PARAMETER
CONDITIONS
Resolution
No Missing Codes
Integral Linearity Error
LTC1863L
MIN
TYP
MAX
Unipolar (Note 7)
Bipolar
Differential Linearity Error
l
12
l
12
Offset Error Match
Unipolar
Bipolar
16
–2
l
l
Bits
±3
±3
–1
1.6
UNITS
Bits
±4
±4
0.1
Unipolar (Note 8)
Bipolar
2
15
±1
LTC1867LA
MIN
TYP
MAX
16
±1
±1
l
Offset Error
Offset Error Drift
16
l
l
Transition Noise
LTC1867L
MIN
TYP MAX
LSB
LSB
LSB
1.6
LSBRMS
±3
±4
±32
±64
±32
±64
LSB
LSB
±1
±1
±4
±4
±3
±3
LSB
LSB
±0.5
±0.5
±0.5
ppm/°C
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
CONVERTER
CHARACTERISTICS l denotes the specifications which apply over the full operating
The
temperature range, otherwise specifications are at TA = 25°C. VDD = 2.7V, external VREF = 1.25V (Notes 5, 6)
LTC1863L
MIN
TYP
MAX
LTC1867L
MIN
TYP MAX
LTC1867LA
MIN
TYP
MAX
UNITS
PARAMETER
CONDITIONS
Gain Error
Unipolar
Bipolar
±6
±6
±96
±96
±64
±64
LSB
LSB
Gain Error Match
Unipolar
Bipolar
±1
±1
±4
±4
±3
±3
LSB
LSB
Gain Error Tempco
Internal Reference
External Reference
±20
±3
±20
±3
±20
±3
ppm/°C
ppm/°C
Power Supply Sensitivity
VDD = 2.7V – 3.6V
±1
±3
±3
LSB
V
DYNAMIC
ACCURACY DD = 3V, external VREF = 1.25V (Note 5)
MIN
LTC1863L
TYP
MAX
LTC1867L/LTC1867LA
MIN
TYP MAX
SYMBOL
PARAMETER
CONDITIONS
UNITS
SNR
Signal-to-Noise Ratio
1kHz Input Signal
73.1
83.7
dB
S/(N+D)
Signal-to-(Noise + Distortion) Ratio
1kHz Input Signal
73
83.1
dB
THD
Total Harmonic Distortion
1kHz Input Signal, Up to 5th Harmonic
–91.8
– 92.3
dB
Peak Harmonic or Spurious Noise
1kHz Input Signal
–94.8
– 95.1
dB
Channel-to-Channel Isolation
100kHz Input Signal
–100
–112
dB
Full Power Bandwidth
–3dB Point
1.25
1.25
MHz
ANALOG INPUT
The l denotes the specifications which apply over the full operating temperature range, otherwise
specifications are at TA = 25°C. (Note 5)
SYMBOL
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
PARAMETER
CONDITIONS
Analog Input Range
Unipolar Mode (Note 9)
Bipolar Mode
CIN
Analog Input Capacitance for CH0 to
CH7/COM
Between Conversions (Sample Mode)
During Conversions (Hold Mode)
tACQ
Sample-and-Hold Acquisition Time
Input Leakage Current
l
l
l
On Channels, CHX = 0V or VDD
INTERNAL REFERENCE CHARACTERISTICS
2.01
UNITS
0 to 2.5
±1.25
V
V
32
4
pF
pF
1.68
µs
±1
l
µA
(Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
PARAMETER
CONDITIONS
VREF Output Voltage
IOUT = 0
VREF Output Tempco
IOUT = 0
±20
ppm/°C
mV/V
1.235
1.25
VREF Line Regulation
2.7V ≤ VDD ≤ 3.6V
0.3
VREF Output Resistance
IOUT ≤0.1mA
3
REFCOMP Output Voltage
IOUT = 0
UNITS
1.265
V
kΩ
2.5
V
DIGITAL INPUTS AND DIGITAL OUTPUTS
The l denotes the specifications which apply over the
full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
VIH
High Level Input Voltage
VDD = 3.6V
l
VIL
Low Level Input Voltage
VDD = 2.7V
l
1.9
UNITS
V
0.45
V
1863l7lfe
For more information www.linear.com/LTC1863L
3
LTC1863L/LTC1867L
DIGITAL INPUTS AND DIGITAL OUTPUTS
The l denotes the specifications which apply over the
full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5)
SYMBOL
PARAMETER
CONDITIONS
IIN
Digital Input Current
VIN = 0V to VDD
CIN
Digital Input Capacitance
VOH
High Level Output Voltage (SDO)
VOL
Low Level Output Voltage (SDO)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
VDD = 2.7V, IO = –10µA
VDD = 2.7V, IO = –200µA
l
VDD = 2.7V, IO = 160µA
VDD = 2.7V, IO = 1.6µA
l
UNITS
±10
l
23
µA
2
pF
2.68
2.65
V
V
0.05
0.15
V
V
0.4
ISOURCE
Output Source Current
SDO = 0V
–9.7
mA
ISINK
Output Sink Current
SDO = VDD
6
mA
Hi-Z Output Leakage
Hi-Z Output Capacitance
CS/CONV = High, SDO = 0V or VDD
CS/CONV = High (Note 10)
Data Format
Unipolar
Bipolar
±10
15
l
l
µA
pF
Straight Binary
Two’s Complement
POWER REQUIREMENTS
The l denotes the specifications which apply over the full operating temperature
range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
SYMBOL
PARAMETER
CONDITIONS
VDD
Supply Voltage
(Note 9)
IDD
Supply Current
fSAMPLE = 175ksps, Internal REF
NAP Mode
SLEEP Mode
l
fSAMPLE = 175ksps
PDISS
Power Dissipation
MIN
TYP
2.7
MAX
UNITS
3.6
V
1
l
0.75
170
0.2
3
mA
µA
µA
l
2
2.7
mW
TIMING CHARACTERISTICS
The l denotes the specifications which apply over the full operating temperature
range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
SYMBOL
PARAMETER
CONDITIONS
MIN
fSAMPLE
Maximum Sampling Frequency
l
tCONV
Conversion Time
l
l
tACQ
Acquisition Time
fSCK
SCK Frequency
t1
CS/CONV High Time
Short CS/CONV Pulse Mode
l
t2
SDO Valid After SCK↓
CL = 25pF (Note 11)
l
t3
SDO Valid Hold Time After SCK↓
CL = 25pF
l
t4
SDO Valid After CS/CONV↓
CL = 25pF
l
t5
SDI Setup Time Before SCK↑
l
t6
SDI Hold Time After SCK↑
l
t7
SLEEP Mode Wake-Up Time
CREFCOMP = 10µF, CVREF = 2.2µF
t8
Bus Relinquish Time After CS/CONV↑
CL = 25pF
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: All voltage values are with respect to GND (unless otherwise
noted).
4
l
TYP
MAX
3.2
3.7
µs
20
MHz
175
2.01
UNITS
kHz
1.68
40
100
5
17
22
20
µs
ns
47
ns
ns
40
ns
15
–6
ns
15
6
ns
80
ms
30
50
ns
Note 3: When these pin voltages are taken below GND or above VDD, they
will be clamped by internal diodes. This product can handle input currents
up to 100mA without latchup.
For more information www.linear.com/LTC1863L
1863l7lfe
LTC1863L/LTC1867L
TIMING CHARACTERISTICS
The l denotes the specifications which apply over the full operating temperature
range, otherwise specifications are at TA = 25°C. (Note 5)
Note 4: When these pin voltages are taken below GND, they will be
clamped by internal diodes. This product can handle input currents up to
100mA below GND without latchup. These pins are not clamped to VDD.
Note 5: VDD = 2.7V, fSAMPLE = 175ksps and fSCK = 20MHz at 25°C,
t r = tf = 5ns and VIN– = 1.25V for bipolar mode unless otherwise specified.
Note 6: Linearity, offset and gain error specifications apply for both
unipolar and bipolar modes. The INL and DNL are tested in bipolar mode.
Note 7: Integral nonlinearity is defined as the deviation of a code from a
straight line passing through the actual endpoints of the transfer curve.
The deviation is measured from the center of the quantization band.
Note 8: Unipolar offset is the offset voltage measured from +1/2LSB
when the output code flickers between 0000 0000 0000 0000 and
0000 0000 0000 0001 for LTC1867L and between 0000 0000 0000
and 0000 0000 0001 for LTC1863L. Bipolar offset is the offset voltage
measured from –1/2LSB when output code flickers between 0000 0000
0000 0000 and 1111 1111 1111 1111 for LTC1867L, and between
0000 0000 0000 and 1111 1111 1111 for LTC1863L.
Note 9: Recommended operating conditions. The input range of ±1.25V
for bipolar mode is measured with respect to VIN– = 1.25V. For unipolar
mode, common mode input range is 0V to VDD for the positive input and
0V to 1.5V for the negative input. For bipolar mode, common mode input
range is 0V to VDD for both positive and negative inputs.
Note 10: Guaranteed by design, not subject to test.
Note 11: t2 of 47ns maximum allows fSCK up to 10MHz for rising capture
with 50% duty cycle and fSCK up to 20MHz for falling capture (with 3ns
setup time for the receiving logic).
TYPICAL PERFORMANCE CHARACTERISTICS
(LTC1867L)
Integral Nonlinearity
vs Output Code
1.5
1.0
0.5
0.5
DNL (LSB)
1.0
0
–0.5
–0.5
–1.0
–1.5
–1.5
0
16384
32768
–2.0
65536
49152
–80
–100
–60
–70
RESULTING AMPLITUDE ON
SELECTED CHANNEL (dB)
AMPLITUDE (dB)
–60
0
32768
16384
49152
0
21.875
43.75
65.625
FREQUENCY (kHz)
65536
–140
87.5
0
21.875
43.75
65.625
FREQUENCY (kHz)
Signal-to-(Noise + Distortion)
Ratio vs Input Frequency
100
VDD = 3V
fSAMPLE = 175ksps
90
80
–90
–100
–110
–120
87.5
1863L7L G03
–80
–130
–120
–140
–100
Crosstalk vs Input Frequency
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 84.7dB
SINAD = 83.5dB
THD = 90dB
–40
–80
1863L7L G02
4096 Points FFT Plot
(VDD = 3V, REFCOMP = Ext 3V)
–20
–60
–120
1863L7L G01
0
–40
OUTPUT CODE
OUTPUT CODE
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 82.9dB
SINAD = 81.4dB
THD = 86.8dB
–20
0
–1.0
–2.0
0
VDD = 2.7V
fSAMPLE = 175ksps
AMPLITUDE (dB)
1.5
INL (LSB)
2.0
VDD = 2.7V
fSAMPLE = 175ksps
AMPLITUDE (dB)
2.0
4096 Points FFT Plot
(VDD = 2.7V, Internal REF)
Differential Nonlinearity
vs Output Code
ADJACENT PAIR
NONADJACENT
PAIR
–140
1
0.1
10
100
1000
ACTIVE CHANNEL INPUT FREQUENCY (kHz)
1863L7L G05
1863L7L G04
SNR
70
60
SINAD
50
40
VDD = 3V
30 INTERNAL REF
fSAMPLE = 175ksps
20
1
10
INPUT FREQUENCY (kHz)
100
1863L7L G06
1863l7lfe
For more information www.linear.com/LTC1863L
5
LTC1863L/LTC1867L
TYPICAL PERFORMANCE CHARACTERISTICS
(LTC1867L)
Total Harmonic Distortion
vs Input Frequency
–20
–100
SFDR
–70
THD
–60
–50
–40
VDD = 3V
–30 INTERNAL REF
fSAMPLE = 175ksps
–20
1
10
INPUT FREQUENCY (kHz)
–40
–50
–60
–70
–80
600
500
400
300
200
–90
–100
100
1
10
100
RIPPLE FREQUENCY (kHz)
100
1000
1500
fSAMPLE = 175ksps
SUPPLY CURRENT (µA)
1100
SUPPLY CURRENT (µA)
Histogram for 4096 Conversions
(LTC1867L)
Supply Current vs Temperature
800
1200
fSAMPLE = 175ksps
INTERNAL REF
1250
1000
3.6VDD
3VDD
600
3
3.3
SUPPLY VOLTAGE (V)
2.7
500
–50
3.6
–25
0
25
50
TEMPERATURE (°C)
10
VDD = 2.7V
UNIPOLAR OFFSET (LSB)
2.505
2.500
REFCOMP (V)
100
170
2.495
2.490
2.485
7
261
58
23 9
VDD = 2.7V
fSAMPLE = 175ksps
EXT VREF = 1.25V
1
20 21 22 23 24 25 26 27 28 29 30 31
CODE
1863L7L G12
Gain Error Drift (LTC1867L)
vs Temperature
15
UNIPOLAR
MODE
VDD = 2.7V
fSAMPLE = 175ksps
EXT VREF = 1.25V
UNIPOLAR/BIPOLAR
10
5
UNIPOLAR OFFSET (LSB)
2.510
75
0
Offset Drift (LTC1867L)
vs Temperature
REFCOMP vs Load Current
BIPOLAR
MODE
0
–5
5
0
–5
–10
2.480
0
0.5
1
1.5
LOAD CURRENT (mA)
2
1863L7L G13
6
333
1863L7L G11
1963L7L G10
2.475
465
200
700
830
600
400
2.7VDD
750
895
800
3.3VDD
1000
VDD = 2.7V
INTERNAL REF
1044
COUNTS
Supply Current vs Supply Voltage
900
1000
1863L7L G09
(LTC1863L/ LTC1867L)
1000
10
100
fSAMPLE (ksps)
1
1863L7L G08
1863L7L G07
1200
VDD = 2.7V
700
SUPPLY CURRENT (µA)
–80
800
VDD = 3V
–30 fSAMPLE = 175ksps
VRIPPLE = 10mVP-P
POWER SUPPLY FEEDTHROUGH (dB)
–90
AMPLITUDE (dB)
Supply Current vs fSAMPLE
(LTC1863L/LTC1867L)
Power Supply Feedthrough
vs Ripple Frequency
–10
–50
–25
0
25
50
TEMPERATURE (°C)
75
100
1863L7L G14
–15
–50
–25
0
25
50
TEMPERATURE (°C)
75
100
1863L7L G15
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
TYPICAL PERFORMANCE CHARACTERISTICS
(LTC1863L/ LTC1867L)
Differential Nonlinearity
vs Output Code (LTC1863L)
1.00
1.00
0.75
0.75
0.50
0.50
0.25
0.25
DNL (LSB)
INL (LSB)
Integral Nonlinearity
vs Output Code (LTC1863L)
0
–0.25
0
–0.25
–0.50
–0.50
–0.75
–0.75
–1.00
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
–1.00
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
1863L7L G16
1863L7L G17
PIN FUNCTIONS
CHO-CH7/COM (Pins 1-8): Analog Input Pins. Analog
inputs must be free of noise with respect to GND. CH7/
COM can be either a separate channel or the common
minus input for the other channels. Unused channels
should be tied to ground.
REFCOMP (Pin 9): Reference Buffer Output Pin. Bypass
to GND with a 10µF tantalum capacitor in parallel with
a 0.1µF ceramic capacitor (2.5V Nominal). To overdrive
REFCOMP, tie VREF to GND.
VREF (Pin 10): 1.25V Reference Output. This pin can also
be used as an external reference buffer input for improved
accuracy and drift. Bypass to GND with a 2.2µF tantalum
capacitor in parallel with a 0.1µF ceramic capacitor.
CS/CONV (Pin 11): This input provides the dual function
of initiating conversions on the ADC and also frames the
serial data transfer.
SCK (Pin 12): Shift Clock. This clock synchronizes the
serial data transfer.
SDO (Pin 13): Digital Data Output. The A/D conversion
result is shifted out of this output. Straight binary format for unipolar mode and two’s complement format for
bipolar mode.
SDI (Pin 14): Digital Data Input Pin. The A/D configuration
word is shifted into this input.
GND (Pin 15): Analog and Digital GND.
VDD (Pin 16): Analog and Digital Power Supply. Bypass
to GND with a 10µF tantalum capacitor in parallel with
a 0.1µF ceramic capacitor. When powering up the
LTC1863L/LTC1867L, or any time VDD falls below the
minimum specified operating voltage, one dummy conversion must be initiated by providing a rising edge on the
CS/CONV pin. The first conversion result may be invalid
and should be ignored. Once the CS/CONV pin is returned
low, a DIN word can be shifted into SDI to program the
configuration for the next conversion. Wait at least t7, the
SLEEP Mode Wake-Up Time of 80ms, before initiating the
second conversion to obtain a valid conversion result.
1863l7lfe
For more information www.linear.com/LTC1863L
7
LTC1863L/LTC1867L
TYPICAL CONNECTION DIAGRAM
±1.25V
DIFFERENTIAL
INPUTS
2.5V
SINGLE-ENDED
INPUT
+
CH0
VDD
–
CH1
GND
CH2
SDI
LTC1863L/
CH3
SDO
LTC1867L
+
CH4
SCK
CH5
CS/CONV
CH6
VREF
CH7/COM
2.7V TO 3.6V
10µF
DIGITAL
I/O
REFCOMP
1.25V
2.2µF
2.5V
10µF
1863L7L TCD
TEST CIRCUITS
Load Circuits for Access Timing
Load Circuits for Output Float Delay
2.7V
2.7V
3k
3k
SDO
SDO
SDO
3k
CL
SDO
3k
CL
(A) Hi-Z TO VOH AND VOL TO VOH
CL
CL
(B) VOL TO Hi-Z
(A) VOH TO Hi-Z
(B) Hi-Z TO VOL AND VOH TO VOL
1863L7L TC02
1863L7L TC01
TIMING DIAGRAMS
t2 (SDO Valid After SCK↓)
t3 (SDO Valid Hold Time After SCK↓)
t1 (For Short Pulse Mode)
t1
t2
50%
50%
CS/CONV
SCK
0.45V
t3
1863L7L TD01a
1.9V
0.45V
SDO
1863L7L TD01b
t5 (SDI Setup Time Before SCK↑)
t6 (SDI Hold Time After SCK↑)
t4 (SDO Valid After CS/CONV↓)
t4
CS/CONV
SDO
t6
t5
1.9V
SCK
0.45V
Hi-Z
1.9V
0.45V
SDI
1.9V
0.45V
1.9V
0.45V
1863L7L TD01c
1863L7L TD01d
t7 (SLEEP Mode Wake-Up Time)
t8 (BUS Relinquish Time)
t7
SCK
t8
50%
CS/CONV
1.9V
SLEEP BIT (SLP = 0)
READ-IN
CS/CONV
50%
SDO
90%
10%
Hi-Z
1863L7L TD01f
1863L7L TD01e
8
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
Overview
Examples of Multiplexer Options
4 Differential
The LTC1863L/LTC1867L are complete, low power, multiplexed ADCs. They consist of a 12-/16-bit, 175ksps capacitive successive approximation A/D converter, a precision
internal reference, a configurable 8-channel analog input
multiplexer (MUX) and a serial port for data transfer.
Conversions are started by a rising edge on the CS/CONV
input. Once a conversion cycle has begun, it cannot be
restarted. Between conversions, the ADCs receive an
input word for channel selection and output the conversion result, and the analog input is acquired in preparation
for the next conversion. In the acquire phase, a minimum
time of 2.01µs will provide enough time for the sampleand-hold capacitors to acquire the analog signal.
During the conversion, the internal differential 16-bit
capacitive DAC output is sequenced by the SAR from
the most significant bit (MSB) to the least significant bit
(LSB). The input is sucessively compared with the binary
weighted charges supplied by the differential capacitive
DAC. Bit decisions are made by a low power, differential comparator that rejects common mode noise. At the
end of a conversion, the DAC output balances the analog input. The SAR content (a 12-/16-bit data word) that
represents the analog input is loaded into the 12-/16-bit
output latches.Analog Input Multiplexer
The analog input multiplexer is controlled by a 7-bit input
data word. The input data word is defined as follows:
SD OS S1
S0 COM UNI SLP
SD = SINGLE/DIFFERENTIAL BIT
OS = ODD/SIGN BIT
S1 = ADDRESS SELECT BIT 1
+ (–)
– (+) {
+ (–)
– (+) {
CH0
CH1
+ (–)
– (+) {
+ (–)
– (+) {
CH4
CH5
8 Single-Ended
+
+
+
+
+
+
+
+
CH2
CH3
CH6
CH7/COM
GND (–)
7 Single-Ended
to CH7/COM
+
+
+
+
+
+
+
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM (–)
Combinations of Differential
and Single-Ended
+
–{
CH0
CH1
–
+{
+
+
+
+
CH2
CH3
CH4
CH5
CH6
CH7/COM
GND (–)
1863L7L AI01
Changing the MUX Assignment “On the Fly”
1st Conversion
+
–{
+
–{
2nd Conversion
CH2
CH3
–
+
{
CH2
CH3
CH4
CH5
+
+
{
CH4
CH5
CH7/COM
(UNUSED)
CH7/COM (–)
1863L7L AI02
Tables 1 and 2 show the configurations when COM = 0,
and COM = 1.
Table 1. Channel Configuration (When COM = 0, CH7/COM Pin
Is Used as CH7)
SD
0
OS
0
S1
0
S0
0
COM
0
0
0
0
1
0
Channel Configuration
“+”
“–”
CH0
CH1
CH2
CH3
0
0
1
0
0
CH4
CH5
0
0
1
1
0
CH6
CH7
0
1
0
0
0
CH1
CH0
0
1
0
1
0
CH3
CH2
0
1
1
0
0
CH5
CH4
S0 = ADDRESS SELECT BIT 0
0
1
1
1
0
CH7
CH6
COM = CH7/COM CONFIGURATION BIT
1
0
0
0
0
CH0
GND
UNI = UNIPOLAR/BIPOLAR BIT
1
0
0
1
0
CH2
GND
SLP = SLEEP MODE BIT
1
0
1
0
0
CH4
GND
1
0
1
1
0
CH6
GND
1
1
0
0
0
CH1
GND
1
1
0
1
0
CH3
GND
1
1
1
0
0
CH5
GND
1
1
1
1
0
CH7
GND
1863l7lfe
For more information www.linear.com/LTC1863L
9
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
Table 2. Channel Configuration (When COM = 1, CH7/COM Pin
Is Used as COMMON)
CHANNEL CONFIGURATION
“+”
“–”
CH0
CH7/COM
SD
1
OS
0
S1
0
S0
0
COM
1
1
0
0
1
1
CH2
CH7/COM
1
0
1
0
1
CH4
CH7/COM
1
0
1
1
1
CH6
CH7/COM
1
1
0
0
1
CH1
CH7/COM
1
1
0
1
1
CH3
CH7/COM
1
1
1
0
1
CH5
CH7/COM
Driving the Analog Inputs
The analog inputs of the LTC1863L/LTC1867L are easy
to drive. Each of the analog inputs can be used as a single-ended input relative to the GND pin (CH0-GND, CH1GND, etc) or in pairs (CH0 and CH1, CH2 and CH3, CH4
and CH5, CH6 and CH7) for differential inputs. In addition, CH7 can act as a COM pin for both single-ended
and differential modes if the COM bit in the input word is
high. Regardless of the MUX configuration, the “+” and
“–” inputs are sampled at the same instant. Any unwanted
signal that is common mode to both inputs will be reduced
by the common mode rejection of the sample-and-hold
circuit. The inputs draw only one small current spike
while charging the sample-and-hold capacitors during
the acquire mode. In conversion mode, the analog inputs
draw only a small leakage current. If the source impedance
of the driving circuit is low then the LTC1863L/LTC1867L
inputs can be driven directly. More acquisition time should
be allowed for a higher impedance source.
The following list is a summary of the op amps that are
suitable for driving the LTC1863L/LTC1867L.
ANALOG
INPUT
50Ω
LT1469: Dual LT1468
LT1490A/LT1491A: Dual/quad micropower amplifiers,
50µA/amplifier max, 500µV offset, common mode range
extends 44V above V– independent of V+, 3V, 5V and
±15V supplies.
LT1568: Very low noise, active RC filter building block,
cutoff frequency up to 10MHz, 2.7V to ±5V supplies.
LT1638/LT1639: Dual/quad 1.2MHz, 0.4V/µs amplifiers,
230µA per amplifier, 3V, 5V and ±15V supplies.
LT1881/LT1882: Dual and quad, 200pA bias current, railto-rail output op amps, up to ±15V supplies.
LTC1992-2: Gain of 2 fully differential input/output
amplifier/driver, 2.5mV offset, CLOAD stable, 2.7V to ±5V
supplies.
LT1995: 30MHz, 1000V/µs gain selectable amplifier, pin
configurable as a difference amplifier, inverting and noninverting amplifier, ±2.5V to ±15V supplies.
LTC6912: Dual programmable gain amplifiers with SPI
serial interface, 2mV offset, 2.7V to ±5V supplies.
LTC6915: Zero drift, instrumentation amplifier with SPI
programmable gain, 125dB CMRR, 0.1% gain accuracy,
10µV offset.
Input Filtering
The noise and the distortion of the input amplifier and
other circuitry must be considered since they will add
to the LTC1863L/LTC1867L noise and distortion. Noisy
input circuitry should be filtered prior to the analog inputs
to minimize noise. A simple 1-pole RC filter is sufficient
50Ω
CH0
LTC1863L/
LTC1867L
2000pF
LT®1468: 90MHz, 22V/µs 16-bit accurate amplifier
GND
DIFFERENTIAL
ANALOG
INPUTS
50Ω
1000pF
CH0
LTC1863L/
LTC1867L
1000pF
CH1
1000pF
10µF
REFCOMP
10µF
1863L7L F01a
Figure 1a. Optional RC Input Filtering for Single-Ended Input
10
REFCOMP
1863L7L F01b
Figure 1b. Optional RC Input Filtering for Differential Inputs
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
for many applications. For instance, Figure 1 shows a 50Ω
source resistor and a 2000pF capacitor to ground on the
input will limit the input bandwidth to 1.6MHz. The source
impedance has to be kept low to avoid gain error and
degradation in the AC performance. The capacitor also
acts as a charge reservoir for the input sample-and-hold
and isolates the ADC input from sampling glitch sensitive
circuitry. High quality capacitors and resistors should be
used since these components can add distortion. NPO
and silver mica type dielectric capacitors have excellent
linearity. Carbon surface mount resistors can also generate distortion from self heating and from damage that
may occur during soldering. Metal film surface mount
resistors are much less susceptible to both problems.
algorithm, the ADC’s spectral content can be examined
for frequencies outside the fundamental.
Signal-to-Noise Ratio
The Signal-to-Noise and Distortion Ratio (SINAD) is the
ratio between the RMS amplitude of the fundamental input
frequency to the RMS amplitude of all other frequency
components at the A/D output. The output is band limited
to frequencies from above DC and below half the sampling
frequency. Figure 3a shows a typical SINAD of 81.4dB with
a 175kHz sampling rate and a 1kHz input. Higher SINAD
can be obtained with a 3V supply. For example, when an
external 3V is applied to REFCOMP (tie VREF to GND), a
SINAD of 83.5dB can be achieved as shown in Figure 3b.
DC Performance
1200
VDD = 2.7V
INTERNAL REF
1044
1000
895
830
0
7
58
–80
–100
–140
0
21.875
43.75
65.625
FREQUENCY (kHz)
87.5
Figure 3a. LTC1867L Nonaveraged 4096 Point
FFT Plot with 2.7V Supply
0
333
170
–60
–120
465
200
–40
1863L7L G03
600
400
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 82.9dB
SINAD = 81.4dB
THD = 86.8dB
–20
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 84.7dB
SINAD = 83.5dB
THD = 90dB
REFCOMP = EXT 3V
–20
261
23 9
1
20 21 22 23 24 25 26 27 28 29 30 31
CODE
1863L7L G12
Figure 2. LTC1867L Histogram for 4096 Conversions
AMPLITUDE (dB)
COUNTS
800
0
AMPLITUDE (dB)
One way of measuring the transition noise associated
with a high resolution ADC is to use a technique where
a DC signal is applied to the input of the ADC and the
resulting output codes are collected over a large number
of conversions. For example, in Figure 2 the distribution
of output codes is shown for a DC input that had been
digitized 4096 times. The distribution is Gaussian and the
RMS code transition noise is about 1.6LSB.
–40
–60
–80
–100
Dynamic Performance
–120
FFT (Fast Fourier Transform) test techniques are used to
test the ADC’s frequency response, distortion and noise
at the rated throughput. By applying a low distortion
sine wave and analyzing the digital output using an FFT
–140
0
21.875
43.75
65.625
FREQUENCY (kHz)
87.5
1863L7L F03b
Figure 3b. LTC1867L Nonaveraged 4096 Point
FFT Plot with 3V Supply
1863l7lfe
For more information www.linear.com/LTC1863L
11
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
Total Harmonic Distortion
Total Harmonic Distortion (THD) is the ratio of the RMS
sum of all harmonics of the input signal to the fundamental itself. The out-of-band harmonics alias into the
frequency band between DC and half the sampling frequency. THD is expressed as:
V2 2 + V3 2 + V4 2 ...+ VN2
THD = 20 log
V1
where V1 is the RMS amplitude of the fundamental frequency and V2 through VN are the amplitudes of the second through Nth harmonics.
Internal Reference
The LTC1863L and LTC1867L have an on-chip, temperature compensated, curvature corrected, bandgap
reference that is factory trimmed to 1.25V. It is internally
connected to a reference amplifier and is available at VREF
(Pin 10). A 3k resistor is in series with the output so that
it can be easily overdriven by an external reference if better drift and/or accuracy are required as shown in Figure
4. The reference amplifier gains the VREF voltage by 2x
to 2.5V at REFCOMP (Pin 9). This reference amplifier
R1
3k
10 VREF
1.25V
BANDGAP
REFERENCE
2.2µF
2.5V
9 REFCOMP
REFERENCE
AMP
10µF
R2
R3
15 GND
compensation pin, REFCOMP, must be bypassed with a
10µF ceramic or tantalum in parallel with a 0.1µF ceramic
for best noise performance.
Digital Interface
The LTC1863L and LTC1867L have a very simple digital
interface that is enabled by the control input, CS/CONV. A
logic rising edge applied to the CS/CONV input will initiate a conversion. After the conversion, taking CS/CONV
low will enable the serial port and the ADC will present
digital data in two’s complement format in bipolar mode
or straight binary format in unipolar mode, through the
SCK/SDO serial port.
Internal Clock
The internal clock is factory trimmed to achieve a typical conversion time of 3.2µs and a maximum conversion
time, 3.7µs, over the full operating temperature range.
The typical acquisition time is 1.68µs, and a throughput
sampling rate of 175ksps is tested and guaranteed.
Automatic Nap Mode
The LTC1863L and LTC1867L go into automatic nap
mode when CS/CONV is held high after the conversion
is complete. With a typical operating current of 750µA
and automatic 170µA nap mode between conversions, the
power dissipation drops with reduced sample rate. The
ADC only keeps the VREF and REFCOMP voltages active
when the part is in the automatic nap mode. The slower
the sample rate allows the power dissipation to be lower
(see Figure 5).
LTC1863L/LTC1867L
1863L7L F04a
800
Figure 4a. LTC1867L Reference Circuit
SUPPLY CURRENT (µA)
3V
VIN
LT1790A-1.25
VOUT
10
2.2µF
9
+
10µF
0.1µF
15
VREF
LTC1863L/
LTC1867L
VDD = 2.7V
700
600
500
400
300
200
REFCOMP
100
GND
1
10
100
fSAMPLE (ksps)
1000
1863L7L G09
1863L7L F04b
Figure 4b. Using the LT1790A-1.25 as an External Reference
12
Figure 5. Supply Current vs fSAMPLE
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
Timing and Control
If the CS/CONV returns low during a bit decision, it can
create a small error. For best performance ensure that the
CS/CONV returns low either within 100ns after the conversion starts (i.e. before the first bit decision) or after the
conversion ends. If CS/CONV is low when the conversion
ends, the MSB bit will appear on SDO at the end of the
conversion and the ADC will remain powered up.
Conversion start is controlled by the CS/CONV digital
input. The rising edge transition of the CS/CONV will start
a conversion. Once initiated, it cannot be restarted until
the conversion is complete. Figures 6 and 7 show the
timing diagrams for two types of CS/CONV pulses.
Example 1 (Figure 6) shows the LTC1863L/LTC1867L
operating in automatic nap mode with CS/CONV signal
staying HIGH after the conversion. Automatic nap mode
provides power reduction at reduced sample rate.
Sleep Mode
If the SLP = 1 is selected in the input word, the ADC will
enter SLEEP mode and draw only leakage current (provided that all the digital inputs stay at GND or VDD). After
release from the SLEEP mode, the ADC needs 80ms to
wake up (charge the 2.2µF/10µF bypass capacitors on
VREF/REFCOMP pins).
The ADCs can also operate with the CS/CONV signal
returning LOW before the conversion ends. In this mode
(Example 2, Figure 7), the ADCs remain powered up. The
digital output, SDO, will go HIGH immediately after the
conversion is complete if the analog inputs are above
half scale in unipolar mode or below half scale in bipolar
mode. This is a way to measure the conversion time of
the A/D converter.
Board Layout and Bypassing
To obtain the best performance, a printed circuit board
with a ground plane is required. Layout for the printed
circuit board should ensure digital and analog signal lines
are separated as much as possible. In particular, care
should be taken not to run any digital signal alongside
an analog signal.
For best performance, it is recommended to keep SCK,
SDI, and SDO at a constant logic high or low during
acquisition and conversion, even though these signals
may be ignored by the serial interface (DON’T CARE).
Communication with other devices on the bus should not
coincide with the conversion period (tCONV).
All analog inputs should be screened by GND. VREF,
REFCOMP and VDD should be bypassed to this ground
plane as close to the pin as possible; the low impedance of
the common return for these bypass capacitors is essential to the low noise operation of the ADC. The width for
these tracks should be as wide as possible.
Figures 8 and 9 are the transfer characteristics for the
bipolar and unipolar mode.
tACQ
1/fSCK
CS/CONV
tCONV
NAP MODE
NOT NEEDED FOR LTC1863
SCK
DON'T CARE
1
2
3
4
SDI
DON'T CARE
SD
0S
S1
S0
D9
D8
SDO
(LTC1863)
SDO
(LTC1867)
5
6
7
COM UNI
SLP
8
9
10
11
12
14
15
16
DON'T CARE
DON'T CARE
Hi-Z
MSB
D11 D10
D6
D5
D4
D3
D2
D1
D0
Hi-Z
MSB
D15 D14 D13 D12 D11 D10
D9
D8
D7
D6
D5
D4
D7
13
D3
D2
D1
D0
1863L7L F06
Figure 6. Example 1, CS/CONV Starts a Conversion and Remains HIGH Until Next Data Transfer. With CS/CONV
Remaining HIGH After the Conversion, Automatic Nap Modes Provides Power Reduction at Reduced Sample Rate
1863l7lfe
For more information www.linear.com/LTC1863L
13
LTC1863L/LTC1867L
APPLICATIONS INFORMATION
tACQ
CS/CONV
NOT NEEDED FOR LTC1863
SCK
SDI
DON'T CARE
1
2
3
4
5
6
7
COM UNI
SLP
8
9
10
11
12
SD
0S
S1
S0
MSB = D11
D10
D9
D8
D6
D5
D4
D3
D2
D1
D0
MSB = D15
D14 D13 D12 D11 D10
D9
D8
D7
D6
D5
D4
13
14
15
DON'T CARE
16
DON'T CARE
tCONV
SDO
(LTC1863)
Hi-Z
SDO
(LTC1867)
Hi-Z
D7
tCONV
D3
D2
D1
D0
1863L7L F07
011...111
111...111
BIPOLAR
ZERO
011...110
111...110
000...001
OUTPUT CODE
OUTPUT CODE (TWO’S COMPLEMENT)
Figure 7. Example 2, CS/CONV Starts a Conversion With Short Active HIGH Pulse.
With CS/CONV Returning LOW Before the Conversion, the ADC Remains Powered Up
000...000
111...111
111...110
FS = 2.5V
1LSB = FS/2n
1LSB (LTC1863L) = 610µV
1LSB (LTC1867L) = 38.1µV
100...001
100...000
–FS/2
–1 0V 1
LSB
LSB
INPUT VOLTAGE (V)
100...000
011...111 UNIPOLAR
ZERO
011...110
FS = 2.5V
1LSB = FS/2n
1LSB (LTC1863L) = 610µV
1LSB (LTC1867L) = 38.1µV
000...001
000...000
FS/2 – 1LSB
0V
FS – 1LSB
INPUT VOLTAGE (V)
1863L7L F08
Figure 8. LTC1863L/LTC1867L Bipolar Transfer
Characteristics (Two’s Complement)
14
100...001
1863L7L F09
Figure 9. LTC1863L/LTC1867L Unipolar Transfer
Characteristics (Straight Binary)
1863l7lfe
For more information www.linear.com/LTC1863L
LTC1863L/LTC1867L
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/product/LTC1863L#packaging for the most recent package drawings.
GN Package
16-Lead Plastic SSOP (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1641 Rev B)
.189 – .196*
(4.801 – 4.978)
.045 ±.005
.009
(0.229)
REF
16 15 14 13 12 11 10 9
.254 MIN
.150 – .165
.229 – .244
(5.817 – 6.198)
.0165 ±.0015
.150 – .157**
(3.810 – 3.988)
.0250 BSC
RECOMMENDED SOLDER PAD LAYOUT
1
.015 ±.004
× 45°
(0.38 ±0.10)
.007 – .0098
(0.178 – 0.249)
.0532 – .0688
(1.35 – 1.75)
2 3
4
5 6
7
8
.004 – .0098
(0.102 – 0.249)
0° – 8° TYP
.016 – .050
(0.406 – 1.270)
NOTE:
1. CONTROLLING DIMENSION: INCHES
INCHES
2. DIMENSIONS ARE IN
(MILLIMETERS)
.008 – .012
(0.203 – 0.305)
TYP
.0250
(0.635)
BSC
GN16 REV B 0212
3. DRAWING NOT TO SCALE
4. PIN 1 CAN BE BEVEL EDGE OR A DIMPLE
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
REVISION HISTORY
REV
DATE
DESCRIPTION
B
6/14
Fixed the Order Information.
C
5/15
Adjusted Notes 3 and 4 to specify input currents up to 100mA.
E
2/18
Added text to VDD pin functions
PAGE NUMBER
2
4, 5
7
1863l7lfe
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications
subject to change without notice. No license
is granted
by implication
or otherwise under any patent or patent rights of Analog Devices.
For more
information
www.linear.com/LTC1863L
15
LTC1863L/LTC1867L
RELATED PARTS
PART NUMBER
DESCRIPTION
COMMENTS
LTC1417
14-Bit, 400ksps Serial ADC
20mW, Unipolar or Bipolar, Internal Reference, SSOP-16 Package
LT1468/LT1469
Single/Dual 90MHz, 22V/µs, 16-Bit Accurate Op Amps
Low Input Offset: 75µV/125µV
LTC1609
16-Bit, 200ksps Serial ADC
65mW, Configurable Bipolar and Unipolar Input Ranges, 5V Supply
LT1790A
Micropower Precision Series Reference
Bandgap, 60µA Max Supply Current, 10ppm/°C, SOT-23 Package
LTC1850/LTC1851
10-Bit/12-Bit, 8-Channel, 1.25Msps ADC
Parallel Output, Programmable MUX and Sequencer, 5V Supply
LTC1852/LTC1853
10-Bit/12-Bit, 8-Channel, 400ksps ADC
Parallel Output, Programmable MUX and Sequencer, 3V or 5V Supply
LTC1860/LTC1861
12-Bit, 1-/2-Channel 250ksps ADC in MSOP
850µA at 250ksps, 2µA at 1ksps, SO-8 and MSOP Packages
LTC1860L/LTC1861L 3V, 12-Bit, 1-/2-Channel 150ksps ADC
450µA at 150ksps, 10µA at 1ksps, SO-8 and MSOP Packages
LTC1863/LTC1867
12-/16-Bit, 8-Channel 200ksps ADC
5V Supply, Pin Compatible with LTC1863L/LTC1867L
LTC1864/LTC1865
16-Bit, 1-/2-Channel 250ksps ADC in MSOP
850µA at 250ksps, 2µA at 1ksps, SO-8 and MSOP Packages
LTC1864L/LTC1865L 3V, 16-Bit, 1-/2-Channel 150ksps ADC in MSOP
16
450µA at 150ksps, 10µA at 1ksps, SO-8 and MSOP Packages
1863l7lfe
LT 0218 REV E • PRINTED IN USA
www.linear.com/LTC1863L
For more information www.linear.com/LTC1863L
ANALOG DEVICES, INC. 2005
工商网监
湘ICP备2023018690号
