LTC2205IUK-14#PBF

LTC2205-14 14-Bit, 65Msps ADC FEATURES DESCRIPTION n The LTC®2205-14 is a sampling 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals up to input frequencies of 700MHz. The input range of the ADC can be optimized with the PGA front end. n n n n n n n n n n n n Sample Rate: 65Msps 78.3dB SNR and 98dB SFDR (2.25VP-P Range) SFDR >90dB at 140MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 600mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit) 40Msps: LTC2204 (16-Bit) 48-Pin (7mm × 7mm) QFN Package APPLICATIONS n n n n n n Telecommunications Receivers Cellular Base Stations Spectrum Analysis Imaging Systems ATE The LTC2205-14 is perfect for demanding communications applications, with AC performance that includes 78.3dB SNR and 98dB spurious free dynamic range (SFDR). Ultralow jitter of 90fsRMS allows undersampling of high input frequencies with excellent noise performance. Maximum DC specs include ±1.5LSB INL, ±1LSB DNL (no missing codes). A separate output power supply allows the CMOS output swing to range from 0.5V to 3.6V. The ENC+ and ENC– inputs may be driven differentially or single-ended with a sine wave, PECL, LVDS, TTL or CMOS inputs. An optional clock duty cycle stabilizer allows high performance at full speed with a wide range of clock duty cycles. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. TYPICAL APPLICATION LTC2205-14: 32K Point FFT, fIN = 5.1MHz, –1dBFS, PGA = 0, DITH = 0 3.3V SENSE OVDD 2.2μF AIN+ 1.25V COMMON MODE BIAS VOLTAGE + ANALOG INPUT AIN– INTERNAL ADC REFERENCE GENERATOR 14-BIT PIPELINED ADC CORE S/H AMP – 0.5V TO 3.6V 0.1μF OF CLKOUT D13 • • • D0 OUTPUT DRIVERS CORRECTION LOGIC AND SHIFT REGISTER OGND CLOCK/DUTY CYCLE CONTROL 3.3V 0.1μF VDD 0.1μF GND 0.1μF 220514 TA01 ENC ENC PGA SHDN DITH MODE OE ADC CONTROL INPUTS RAND 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 –100 –110 –120 –130 AMPLITUDE (dBFS) VCM 0 5 10 20 25 15 FREQUENCY (MHz) 30 220514 G04 220514fb 1 LTC2205-14 ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION OVDD = VDD (Notes 1 and 2) Supply Voltage (VDD) .................................. –0.3V to 4V Digital Output Ground Voltage (OGND)....... –0.3V to 1V Analog Input Voltage (Note 3) .....–0.3V to (VDD + 0.3V) Digital Input Voltage ....................–0.3V to (VDD + 0.3V) Digital Output Voltage ............... –0.3V to (OVDD + 0.3V) Power Dissipation............................................2000mW Operating Temperature Range LTC2205-14C .......................................... 0°C to 70°C LTC2205-14I ....................................... –40°C to 85°C Storage Temperature Range ................. –65°C to 150°C Digital Output Supply Voltage (OVDD) ......... –0.3V to 4V 48 GND 47 PGA 46 RAND 45 MODE 44 OE 43 OF 42 D13 41 D12 40 D11 39 D10 38 OGND 37 OVDD TOP VIEW SENSE 1 VCM 2 VDD 3 VDD 4 GND 5 AIN+ 6 AIN– 7 GND 8 ENC+ 9 ENC– 10 GND 11 VDD 12 36 OVDD 35 D9 34 D8 33 D7 32 D6 31 OGND 30 CLKOUT+ 29 CLKOUT– 28 D5 27 D4 26 D3 25 OVDD VDD 13 VDD 14 GND 15 SHDN 16 DITH 17 NC 18 NC 19 D0 20 D1 21 D2 22 OGND 23 OVDD 24 49 UK PACKAGE 48-LEAD (7mm s 7mm) PLASTIC QFN TJMAX = 125°C, θJA = 29°C/W EXPOSED PAD IS GND (PIN 49), MUST BE SOLDERED TO PCB BOARD ORDER INFORMATION LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE LTC2205CUK-14#PBF LTC4263CDE#TRPBF LTC2205UK-14 48-Lead (7mm × 7mm) Plastic QFN 0°C to 70°C LTC2205IUK-14#PBF LTC4263IDE#TRPBF LTC2205UK-14 48-Lead (7mm × 7mm) Plastic QFN –40°C to 85°C LEAD BASED FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE LTC2205CUK-14 LTC2205CUK-14#TR LTC2205UK-14 48-Lead (7mm × 7mm) Plastic QFN 0°C to 70°C LTC2205IUK-14 LTC2205IUK-14#TR LTC2205UK-14 48-Lead (7mm × 7mm) Plastic QFN –40°C to 85°C Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/ CONVERTER CHARACTERISTICS The ● denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 4) PARAMETER CONDITIONS MIN l Resolution (No Missing Codes) TYP MAX 14 UNITS Bits Integral Linearity Error Differential Analog Input (Note 5) l ±0.6 ±1.5 LSB Differential Linearity Error Differential Analog Input l ±0.2 ±1 LSB (Note 6) l ±1 ±8.5 Offset Error Offset Drift ±10 Gain Error External Reference Full-Scale Drift Internal Reference External Reference Transition Noise l ±0.3 mV μV/°C ±1.9 %FS ±30 ±10 ppm/°C ppm/°C 0.7 LSBRMS 220514fb 2 LTC2205-14 ANALOG INPUT The ● denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 4) SYMBOL PARAMETER CONDITIONS VIN Analog Input Range (AIN+ – AIN–) MIN 3.135V ≤ VDD ≤ 3.465V l TYP MAX UNITS 1.5 to 2.25 VP-P VIN, CM Analog Input Common Mode Differential Input (Note 7) l 1 1.5 V IIN Analog Input Leakage Current 0V ≤ AIN+, AIN– ≤ VDD l –1 1 μA ISENSE SENSE Input Leakage Current 0V ≤ SENSE ≤ VDD l –3 3 μA IMODE MODE Pin Pull-Down Current to GND CIN Analog Input Capacitance tAP 1.25 10 μA 6.5 1.8 pF pF Sample-and-Hold Aperature Delay Time 0.7 ns tJITTER Sample-and-Hold Aperature Delay Time Jitter 90 fsRMS CMRR Analog Input Common Mode Rejection Ratio 60 dB BW-3dB Full Power Bandwidth 700 MHz Sample Mode ENC+ < ENC– Hold Mode ENC+ > ENC– 1V < (AIN+ = AIN–)