MAX1060ACEI+

19-2723; Rev 0; 04/03 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface The MAX1060 is available in a 28-pin QSOP package, while the MAX1064 comes in a 24-pin QSOP. For pincompatible +3V, 10-bit versions, refer to the MAX1061/ MAX1063 data sheet. Features ♦ 10-Bit Resolution, ±0.5 LSB Linearity ♦ +5V Single-Supply Operation ♦ User-Adjustable Logic Level (+2.7V to +5.5V) ♦ Internal +2.5V Reference ♦ Software-Configurable Analog Input Multiplexer 8-Channel Single Ended/ 4-Channel Pseudo-Differential (MAX1060) 4-Channel Single Ended/ 2-Channel Pseudo-Differential (MAX1064) ♦ Software-Configurable Unipolar/Bipolar Analog Inputs ♦ Low Current 2.5mA (400ksps) 1.0mA (100ksps) 400µA (10ksps) 2µA (Shutdown) ♦ Internal 6MHz Full-Power Bandwidth Track/Hold ♦ Byte-Wide Parallel (8 + 2) Interface ♦ Small Footprint 28-Pin QSOP (MAX1060) 24-Pin QSOP (MAX1064) Pin Configurations TOP VIEW HBEN 1 24 VLOGIC Applications D7 2 23 VDD Industrial Control Systems Energy Management Data Logging Patient Monitoring D6 3 22 REF D5 4 21 REFADJ Data-Acquisition Systems Touch Screens D4 5 D3 6 Ordering Information PART MAX1060ACEI TEMP RANGE PIN-PACKAGE INL (LSB) 0°C to +70°C 28 QSOP ±0.5 MAX1060BCEI 0°C to +70°C 28 QSOP ±1 MAX1060AEEI -40°C to +85°C 28 QSOP ±0.5 MAX1060BEEI -40°C to +85°C 28 QSOP ±1 Ordering Information continued at end of data sheet. 20 GND MAX1064 19 COM D2 7 18 CH0 D1/D9 8 17 CH1 D0/D8 9 16 CH2 INT 10 15 CH3 RD 11 14 CS WR 12 13 CLK QSOP Pin Configurations continued at end of data sheet. Typical Operating Circuits appear at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX1060/MAX1064 General Description The MAX1060/MAX1064 low-power, 10-bit analog-todigital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply. Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1060/MAX1064 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1060 has eight input channels and the MAX1064 has four input channels (four and two input channels, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and dataacquisition applications or for other circuits with demanding power consumption and space requirements. MAX1060/MAX1064 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface ABSOLUTE MAXIMUM RATINGS VDD to GND ..............................................................-0.3V to +6V VLOGIC to GND.........................................................-0.3V to +6V CH0–CH7, COM to GND ............................-0.3V to (VDD + 0.3V) REF, REFADJ to GND.................................-0.3V to (VDD + 0.3V) Digital Inputs to GND ...............................................-0.3V to +6V Digital Outputs (D0–D9, INT) to GND ..............................................-0.3V to (VLOGIC + 0.3V) Continuous Power Dissipation (TA = +70°C) 24-Pin QSOP (derate 9.5mW/°C above +70°C)...........762mW 28-Pin QSOP (derate 8.0mW/°C above +70°C)...........667mW Operating Temperature Ranges MAX1060_C_ _/MAX1064_C_ _ ......................... 0°C to +70°C MAX1060_E_ _/MAX1064_E_ _ .......................-40°C to +85°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = VLOGIC = +5V ±10%, COM = GND, REFADJ = VDD, VREF = +2.5V, 4.7µF capacitor at REF pin, fCLK = 7.6MHz (50% duty cycle), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DC ACCURACY (Note 1) Resolution 10 RES Relative Accuracy (Note 2) INL Differential Nonlinearity DNL Bits MAX106_A ±0.5 MAX106_B ±1 No missing codes over temperature ±1 LSB ±2 LSB Offset Error Gain Error ±2 (Note 3) LSB LSB Gain Temperature Coefficient ±2.0 ppm/°C Channel-to-Channel Offset Matching ±0.1 LSB DYNAMIC SPECIFICATIONS (fIN(sine wave) = 50kHz, VIN = 2.5VP-P, 400ksps, external fCLK = 7.6MHz, bipolar input mode) Signal-to-Noise Plus Distortion SINAD 60 dB Total Harmonic Distortion (Including 5th-Order Harmonic) THD -72 dB Spurious-Free Dynamic Range SFDR 72 dB fIN1 = 49kHz, fIN2 = 52kHz 76 dB Channel-to-Channel Crosstalk fIN = 175kHz, VIN = 2.5VP-P (Note 4) -78 dB Full-Linear Bandwidth SINAD > 56dB 350 kHz Full-Power Bandwidth -3dB rolloff 6 MHz Intermodulation Distortion IMD CONVERSION RATE Conversion Time (Note 5) T/H Acquisition Time tCONV Aperture Jitter Duty Cycle 2 2.1 External acquisition/internal clock mode 2.5 3.0 3.5 Internal acquisition/internal clock mode 3.2 3.6 4 tACQ Aperture Delay External Clock Frequency External clock mode fCLK 400 External acquisition or external clock mode 25 External acquisition or external clock mode