Evaluates: MAX11198
MAX11198 Evaluation Kit
General Description
The MAX11198 evaluation kit (EV kit) provides a proven
design to evaluate the MAX11198 of 16-bit, 2-channel,
2Msps, fully differential simultaneously sampling SAR
ADCs with an internal reference. The EV kit includes an
evaluation board and a graphical user interface (GUI) that
provides communication from the target device to the PC
through a ZedBoard™ with a Xilinx Zynq® -7000 SOC.
The EV kit is connected to a ZedBoard through a low-pincount FMC connector and a ZedBoard connected to the
PC through an Ethernet port.
The EV kit includes Windows XP®, Windows® 7 and
Windows 8 compatible software for exercising the features
of the IC. The EV kit GUI allows different sample sizes,
adjustable sampling rates, and graphing software that
includes the FFT and histogram of the sampled signals.
The EV kit can be powered by +12V supply from
ZedBoard or by an external power supply. The EV kit has
two DC-DC converters and 5V LDO which provide all
necessary supplies for operation with ZedBoard.
The MAX11198 EV kit comes installed with a
MAX11198ATE+ in a 16-pin, 2mm x 3mm TQFN-EP
package.
The EV kit aims to be used with an external resolver or
encoder to monitor and measuring degrees of rotation or
absolute position of the rotor at any given moment.
Windows and Windows XP are registered trademarks and
registered service marks of Microsoft Corporation.
ZedBoard is a trademark of Avnet Corp.
Zynq is a registered trademark of Xilinx, Inc..
319-100084; Rev 0; 10/17
Features
●● 50MHz SPI Clock Capability through FMC Connector
●● Various Sample Sizes and Sample Rates
●● Collects Up to 1 Million Samples
●● Time Domain, Frequency Domain, and Histogram
Plotting
●● Sync In and Sync Out for Coherent Sampling
●● On-Board Input Buffers: MAX44242 and MAX44205
(Fully Differential)
●● On-Board External Voltage Reference: MAX6126
●● Proven PCB Layout
●● Fully Assembled and Tested
●● Windows XP, Windows 7, and Windows
8-Compatible Software
Ordering Information appears at end of data sheet.
MAX11198 Evaluation Kit
Evaluates: MAX11198
EV Kit Photo
www.maximintegrated.com
Maxim Integrated │ 2
MAX11198 Evaluation Kit
Evaluates: MAX11198
System Block Diagram
1
SIN+
2
COS-
4
SHIELDS
5
EXCITATION -
6
EXCITATION +
7
MAX17552
(100mA DC-DC)
POWER
JACK
+12V
+12V
+5V
EXT OVDD
+6.5V
MAX44205
VADJ (1.8V, 2.5V, or 3.3V)
IN1+
REFIN/2
REFIN
IN1REFIN/2
AVDD OVDD
MAX11198
IN2+
3
COS+
+6.5V
VREF
TERMINAL
2x MAX44242
BLOCK
SIN-
MAX17552
(100mA DC-DC)
MAX15006B
EXT REF
RESOLVER / ENCODER
INPUTS
-6.5V
IN2-
AGND
SPI0 (CNVST, SCLK0,
DOUT1, DOUT2)
FMC
DGND
-6.5V
+6.5V
+5V
(4V TO 8V,
1kHz TO 10kHz)
MAX6126A41+
VREF
+6.5V
MAX44242
MAX44242
-6.5V
2kΩ
50Ω
MAX5316
10nF
SPI1 (CSb, SCLK1, DAC_DIN, DAC_DOUT)
MAX11198 EV Kit Files
FILE
MAX11198EVKitSetupV1.0.exe
Boot.bin
www.maximintegrated.com
DESCRIPTION
Application Program (GUI)
ZedBoard firmware (SD card to boot Zynq)
Maxim Integrated │ 3
MAX11198 Evaluation Kit
Evaluates: MAX11198
Quick Start
5) Connect the EV Kit FMC connector to the ZedBoard
FMC connector. Gently press them together.
Required Equipment
●●
MAX11198 EV kit (includes SD card with firmware)
●●
ZedBoard FPGA platform
(optional – NOT INCLUDED with EV Kit)
●●
Function generator or an external resolver (optional)
●●
Windows XP, Windows 7 or Windows 8 PC with an
Ethernet port
Note: In the following section(s), software-related items
are identified by bolding. Text in bold refers to items directly from the EV system software. Text in bold and underline refers to items from the Windows operating system.
Procedure
The EV kit is fully assembled and tested. Follow the steps
below to verify board operation:
1) Visit www.maximintegrated.com/evkitsoftware to
download the latest version of the EV kit software,
MAX11198EVK.ZIP. Save the EV kit software to a
temporary folder and uncompress the ZIP file.
2) Install the EV kit software on your computer by running the MAX11198_EVKitSetupV1.0.exe program
inside the temporary folder. The program files are
copied to your PC and icons are created in the Windows Start | Programs menu.
3) Connect the Ethernet cable from the PC to the ZedBoard and configure the Internet Protocol Version
4 (TCP/Ipv4) properties in the local area Connection to IP address 192.168.1.2 and subnet Mask to
255.255.255.0.
4) Verify that the ZedBoard SD card contains the Boot.
bin file for the MAX11198 EV Kit
6) Verify that all jumpers are in their default positions for
the ZedBoard (Table 1) and EV kit board (Table 2).
7) Connect the 12V power supply to the ZedBoard.
Leave the Zedboard powered off.
8) Enable the ZedBoard power supply by sliding SW8
to ON and connect the +12V adapter to the EV kit.
9) Start the EV kit software by opening its icon in the
Start | Programs menu. The EV kit software appears as shown in Figure 1. From the Device menu
select FPGA. Verify that the lower left status bar
indicates the EV Kit hardware is Connected. The
following configuration is used to verify functionality
of simultaneous sampling of the same signal from
signal generator applied to both channels.
10) Connect the positive terminal of the function generator to the AIN0D+ (TP1) test point on the EV kit. Connect the negative terminal of the function generator
to the AIN0D- (TP2) test point on the EV kit.
11) Configure the signal source to generate a 100Hz,
1VP-P sinusoidal wave with +1V offset.
12) Turn on the function generator.
13) Click on the Scope tab.
14) Check the Remove DC Offset checkbox to remove
the DC component of the sampled data.
15) Click the Capture button to start the data analysis.
16) The EV kit software appears as shown in Figure 1.
17) Verify the frequency is approximately 100Hz is displayed on the right. The scope image has buttons in
the upper right corner that allow zooming in to detail.
Table 1. ZedBoard Jumper Settings
JUMPER
SHUNT POSITION
1-2
Select 3.3V for VADJ (OVDD)
J18
3-4
Select 2.5V for VADJ (OVDD)
5-6
Select 1.8V for VADJ (OVDD)
2-3
1-2
1-2
2-3
2-3
Boot from SD card
NA
SD card installed
JP11
JP10
JP9
JP8
JP7
JP10
J12
J20
NA
SW8
OFF
www.maximintegrated.com
DESCIPTION
Connected to 12V wall adapter
ZedBoard power switch, OFF while connecting boards
Maxim Integrated │ 4
MAX11198 Evaluation Kit
Evaluates: MAX11198
Table 2. MAX11198 Board Jumper Settings
HEADER
J2
J3
J4
J5
J6
J7
J8
J9
J10
J11
J12
J13
JUMPER POSITION
Open*
1-2
Open*
1-2
Open*
1-2
Open*
J22
J23
J24
J25
J26
Use differential input to Channel 1
Use single-ended input to Channel 1 referenced to GND
Use differential input to Channel 2
Use single-ended input to Channel 2 referenced to GND
TP2 is disconnected to Channel 1 input
TP2 is connected to Channel 1 input
TP2 is disconnected to Channel 2 input
1-2
TP2 is connected to Channel 2 input
1-2*
Use U1.A as input buffer to Channel 1 negative input
2-3
Bypass U1.A
1-2*
Use U1.B as input buffer to Channel 1 positive input
2-3
Bypass U1.B
1-2*
Use U2.A as input buffer to Channel 2 negative input
2-3
Bypass U2.A
1-2*
Use U2.B as input buffer to Channel 2 positive input
2-3
Bypass U2.B
Open*
1-2
Open*
1-2
Open
For independent Channel 1 and Channel 2 measurements
Short IN1+ to IN2+ for single input to both channels
For independent Channel 1 and Channel 2 measurements
Short IN1- to IN2- for single input to both channels
Use J12.2 to supply an external voltage to AVDD
1-2*
Use onboard +5V to AVDD
Open*
Use an external reference
1-2*
Generates REFIN/2 for differential buffers (U3, U4)
Open*
Disconnect U14 output from J13 and U15. U15 uses U5 internal reference to
generate REFIN/2 for U3 and U4 differential buffers.
1-2*
Connect U14 to J13 and U15. U15 generates REFIN/2 = 2.048V for U3 and
U4 differential buffers.
J14
J15
DESCRIPTION
1-2
Use external OVDD
2-3*
Use OVDD voltage from ZedBoard. See J18 selection in Table 1.
1-2*
Enable U12 and U13 DC-DC converters to generate ±6.5V
2-3
Disable U12 and U13; it is also recommended to open J24 and J25
1-2*
Use +12V from ZedBoard to power EV kit
Open
Use an external +12V supply to J20 or J21
1-2*
Open
1-2*
Use -6.5V from U13
Use an external -6.5V to TP21
Use +6.5V from U12
Open
Use an external +6.5V to TP22
Open*
Disconnect U7 output from TP2
1-2
Connect U7 output to TP2
*Default position.
www.maximintegrated.com
Maxim Integrated │ 5
MAX11198 Evaluation Kit
General Description of Software
The main window of the EV kit software contains five
tabs: System, Scope, DMM, Histogram, and FFT. The
System tab provides control for the ADC configuration
including calibration and single data capture. The other
four tabs are used for evaluating the data captured by
the ADC.
System Tab
The System tab allows to select Sample Rate, Number
of Samples, Clock Source for coherent sampling and
for SPI interface, as well as EV kit Device resolution from
Evaluates: MAX11198
corresponding pulldown menu. There is a block diagram
of the EV kit and Calibration section for convenience.
The Read Data information is displayed on the right, which
shows the data in both voltage and LSB, see Figure 1.
Sample Rate (SPS)
To select the desired data rate choose the Sample Rate
(SPS) pulldown menu. The sampling rate is available from
1000sps to 2000000sps.
Number of Samples
The Number of Samples pulldown menu allows choosing
from 1 up to 1048576 samples to be captured.
Figure 1. EV Kit Software (Configuration Tab)
www.maximintegrated.com
Maxim Integrated │ 6
MAX11198 Evaluation Kit
Reference Voltage
The Reference Voltage selection should match with the
jumper settings refer to Table 2. A user can select either
internal or external reference voltage. The internal reference is fixed to 2.5V. The external reference can be from
2.5V to 4.75V. Use “+” or “-″ buttons to adjust the actual
voltage reference, or simply type in a new value.
ADC Calibration
The ADC Calibration section allows to calibrate each
channel independently.
Scope Tab
Evaluates: MAX11198
of Samples, Display Unit, Average Samples, and
Resolution Selection can be set in this tab if they were
not appropriately adjusted in other tabs. The Display Unit
pull-down list allows counts in LSB and voltages in V, mV,
or µV. Once the desired configuration is set, click on the
Capture button. The right side of the tab sheet displays
details of the waveform, such as average, standard deviation, maximum, minimum, and fundamental frequency for
each channel as shown in Figure 2.
To save the captured data to a file, select Options > Save
Graph > Scope. This saves the setting on the left and the
data captured to a CSV file.
The Scope tab sheet is used to capture data and display it
in the time domain. The desired Sampling Rate, Number
Figure 2. EV Kit Software (ScopeTab)
www.maximintegrated.com
Maxim Integrated │ 7
MAX11198 Evaluation Kit
DMM Tab
The DMM tab sheet provides the typical information as a
digital multimeter. Once the desired configuration is set,
click on the Capture button. Figure 3 displays the results
shown by the DMM tab when no signal is applied to both
channels.
Evaluates: MAX11198
To save the histogram data to a file, go to Options > Save
Graph > Histogram. This saves the setting on the left
and the histogram data captured to a CSV file.
FFT Tab
The Histogram tab sheet is used to show the histogram
of the data. Sampling rate and number of samples can
also be set in this tab if they were not appropriately
adjusted in other tabs. Once the desired configuration is
set, click on the Capture button. The right side of the tab
sheet displays details of the histogram such as average,
standard deviation, maximum, minimum, peak-to-peak
noise, effective resolution, and noise-free resolution as
shown in Figure 4.
The FFT tab sheet is used to display the FFT of the data.
The Sample Rate, Number of Samples, Resolution
Selection, and type Window Function can be set as
desired. To calculate the Adjusted Input Signal frequency for Coherent Sampling, type in the Input Signal
frequency in Hertz and GUI automatically calculates the
master clock needs to be applied for coherent sampling
and vice versa. Once the preferred configuration is set,
click on the Capture button. The right side of the tab
displays the performance based on the FFT, such as fundamental frequency, SNR, SINAD, THD, SFDR, ENOB,
and Noise Floor as shown in Figure 5.
The histogram tab is enabled at default. Using the histogram will slow down the GUI response. To disable it,
check the Disable Histogram box.
To save the FFT data to a file, go to Options > Save
Graph > FFT. This saves the setting on the left and the
FFT data captured to a CSV file.
Histogram Tab
Figure 3. EV Kit Software (DMM Tab)
www.maximintegrated.com
Maxim Integrated │ 8
MAX11198 Evaluation Kit
Evaluates: MAX11198
Figure 4. EV Kit Software (Histogram Tab)
Figure 5. EV Kit Software (FFT Tab)
www.maximintegrated.com
Maxim Integrated │ 9
MAX11198 Evaluation Kit
Evaluates: MAX11198
When coherent sampling is needed, this tab allows the
user to calculate the input signal applied to the board.
Adjust the input frequency of the low-jitter clock to the
value as shown in the Adjusted Input Signal (Hz) and
apply it to the EV KIT SYNC_CLK_IN connector. See the
Sync Input and Sync Output section before using this
feature.
Figure 6 shows the setup Maxim Integrated uses to capture data for coherent sampling.
Figure 7 shows the coherent FFT signal. Use the
jumper settings from Table 2 for proper configurations.
The low-jitter clock is synchronized with the signal generator at 10MHz from the ZedBoard. To achieve coherent
sampling, click on the Calculate button and enter the
Adjusted Input Signal (Hz) into low-jitter clock. Timing
for all SPI timing and sampling rate are based off the
system clock.
User-Supplied SPI
To evaluate the EV kit with a user-supplied SPI bus,
disconnect the board from the ZedBoard. Apply the usersupplied SPI signals to SCLK, CNVST, DOUT1, and
DOUT2 to J17. Make sure the return ground from J17.15
is connected to master ground.
FMC Interface
The users should confirm compatibility of pin-usage
between their own FMC implementation and that of the
MAXIM EV kit before connecting the MAXIM EV kit to a
different system with FMC connectors.
LOW JITTER CLOCK
OUT
~100MHz
ZEDBOARD
10MHz
_
AIN1-
+
AIN1+
_
AIN2-
+
AIN2+
SIGNAL GENERATOR
PC
DCLK_IN
MAX11198EVKIT#
ETHERNET CABLE
Figure 6. EV Kit Coherent Sampling Setup
www.maximintegrated.com
Maxim Integrated │ 10
MAX11198 Evaluation Kit
Evaluates: MAX11198
Figure 7. MAX11198 EV Kit Coherent Sampling (FFT Tab)
External OVDD Power Supply
An external OVDD voltage can supply to TP12 in range
from 1.8V to 3.6V. The J15 shunt should be set in 1-2
position.
User-Supplied Power Supply
The EV kit receives power from ZedBoard or from a single
DC source of 12V, 200mA through a J26 power jack. The
two MAX17552 DC-DC converters generate +6.5V and
-6.5V for the buffers, U1 and U2, and differential amplifiers, U3 and U4. The +6.5V power is then regulated down
to a +5V by MAX15006B for U5. See the EV kit schematic
for details. User can supply an external +6.5V to TP22
and -6.5V to TP21 to reduce the influence of DC-DC converter switching frequency. In this case, the J23, J24 and
J25 shunts must be removed.
Sync Input and Sync Output
(for coherent sampling)
Sync Input and Sync Output is applicable to the FPGA
(ZedBoard) and is not used in Standalone mode. Sync
Input and Sync Output The SYNC_IN SMA accepts an
approximate 100MHz waveform signal to generate the
system clock of the ZedBoard. For maximum performance, use a low-jitter clock that syncs to the user’s
analog function generator. The SYNC_OUT SMA outputs
a 10MHz square waveform that syncs to the user’s analog
function generator. Both options are used for coherent
sampling of the IC. Use only one option at a time. The
relationship between fIN, fS, NCYCLES, and MSAMPLES
is given as follows:
N
fIN
= CYCLES
f S M SAMPLES
ADC Input Amplifiers
The analog front-end conditioner for each channel
includes the input low-pass filter (1k resistor and 1000pF
capacitor), the MAX44242 input buffer and the MAX44205
fully differential amplifier.
where:
fIN = Input frequency
fS = Sampling frequency
NCYCLES = Prime number of cycles in the sampled set
MSAMPLES = Total number of samples
www.maximintegrated.com
Maxim Integrated │ 11
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Bill of Materials
ITEM
REF DES
DNI/DNP
QTY
1
C1, C100, C101
-
3
TPSC226K025R0275
AVX
VALUE
DESCRIPTION
22UF
CAPACITOR; SMT; 6032; TANTALUM; 22uF;
25V; 10%; TPS; -55degC to +125degC
2
C2-C5, C8-C11
-
8
GRM1885C1H102JA01;
C1608C0G1H102J080
MURATA; TDK
1000PF
CAPACITOR; SMT (0603); CERAMIC CHIP;
1000PF; 50V; TOL=5%; TG=-55 DEGC TO
+125 DEGC
3
C6, C7, C14, C15, C31,
C35, C57, C67, C116
-
9
GRM21BR61E106K;
C2012X5R1E106K125AB;
C2012X5R1E106K
MURATA/TDK
10UF
CAPACITOR; SMT (0805); CERAMIC CHIP;
10UF; 25V; TOL=10%; MODEL=; TG=-55
DEGC TO +125 DEGC; TC=X5R
4
C12, C13, C16-C19, C28,
C29, C32, C33, C36, C37,
C39, C40, C55, C56, C61,
C65, C70, C73, C78, C81,
C82, C84, C115
-
25
GRM188R72A104KA35;
CC0603KRX7R0BB104
MURATA; TDK
0.1UF
CAPACITOR; SMT (0603); CERAMIC CHIP;
0.1UF; 100V; TOL=10%; TG=-55 DEGC TO
+125 DEGC; TC=X7R
5
C20-C23
-
4
GRM1555C1H102JA01;
C1005C0G1H102J050
MURATA; TDK
1000PF
CAPACITOR; SMT (0402); CERAMIC CHIP;
1000PF; 50V; TOL=5%; TG=-55 DEGC TO
+125 DEGC
6
C30, C34
-
2
TMK212BBJ106KG-T;
CL21A106KAFN3N
TAIYO YUDEN
10UF
CAPACITOR; SMT (0805); CERAMIC CHIP;
10UF; 25V; TOL=10%; MODEL=; TG=-55
DEGC TO +85 DEGC; TC=X5R
7
C38, C54, C74-C77, C85,
C114
-
8
UMK107AB7105KA
TAIYO YUDEN
1UF
CAPACITOR; SMT (0603); CERAMIC CHIP;
1UF; 50V; TOL=10%; TG=-55 DEGC TO +125
DEGC; TC=X7R
8
C41, C42
-
2
C0402H102J5GAC
KEMET
1000PF
CAPACITOR; SMT (0402); CERAMIC CHIP;
1000PF; 50V; TOL=5%; MODEL=HT SERIES;
TG=-55 DEGC TO +200 DEGC; TC=C0G
9
C43, C46, C48, C51, C52
-
5
C1608X5R1E106M080AC;
CL10A106MA8NRNC
TDK/SAMSUNG
ELECTRONICS
10UF
CAPACITOR; SMT (0603); CERAMIC CHIP;
10UF; 25V; TOL=20%; TG=-55 DEGC TO +85
DEGC; TC=X5R
10
C44, C47, C49, C50, C53
-
5
CGA2B3X7R1H104K;
C1005X7R1H104K050BB;
GRM155R71H104KE14
TDK; MURATA
0.1UF
CAPACITOR; SMT (0402); CERAMIC CHIP;
0.1UF; 50V; TOL=10%; TG=-55 DEGC TO
+125 DEGC; TC=X7R
11
C45, C58, C59, C71, C72
-
5
GMK212B7105KG
TAIYO YUDEN
1.0UF
CAPACITOR; SMT (0805); CERAMIC; 1UF;
35V; TOL=10%; MODEL=GMK SERIES; TG=55 DEGC TO +125 DEGC; TC=X7R
www.maximintegrated.com
MFG PART #
MFG
NOTES
Maxim Integrated │ 12
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Bill of Materials (continued)
ITEM
REF DES
DNI/DNP
QTY
MFG PART #
MFG
VALUE
DESCRIPTION
NOTES
CAPACITOR; SMT (0603); CERAMIC CHIP;
0.01UF; 50V; TOL=5%; MODEL=X7R; TG=-55
DEGC TO +125 DEGC; TC=+/
12
C62-C64, C68
-
4
C0603X7R500103JNP;
C0603C103J5
13
C66
-
1
C0603C101J5GAC; ECJ1VC1H101J;
C1608C0G1H101J080AA;
GRM1885C1H101JA01
14
C69, C79, C80, C106,
C108
-
5
C0603C102K1GAC
15
C102, C103
-
2
C1206C105K3RAC; ECJ3YB1E105K
16
C107, C109
-
2
GRM31CR71E106KA12L;
CL31B106KAHNNN
17
C110-C113
-
4
C2012X7R1E475K125AB
18
CON1
-
1
ASP-134604-01
19
D1
-
1
MMSZ5226BS
20
D2
-
1
B0530WS-7-F
21
D3
-
1
MBR0520L
FAIRCHILD
MBR0520
SEMICONDUCTOR
L
DIODE, SCHOTTKY, SOD-123, PIV=20V,
Vf=0.385V@If=0.5A, If(ave)=0.5A
22
DS1, DS2
-
2
LGL29K-G2J1-24-Z
OSRAM
LGL29KG2J1-24-Z
DIODE; LED; SMARTLED; GREEN; SMT;
PIV=1.7V; IF=0.02A
23
GND, TP1, TP3, TP4,
TP11, TP13, TP16, TP18TP20, TP23, TP25
-
12
5001
KEYSTONE
N/A
TEST POINT; PIN DIA=0.1IN; TOTAL
LENGTH=0.3IN; BOARD HOLE=0.04IN;
BLACK; PHOSPHOR BRONZE WIRE SILVER
PLATE FINISH;
24
J1
-
1
OSTVN08A150
ON-SHORE
TECHNOLOGY
INC.
25
J2-J5, J10-J14, J23-J26
-
13
PCC02SAAN
SULLINS
26
J6-J9, J15, J22
-
6
PCC03SAAN
SULLINS
www.maximintegrated.com
KEMET
0.01UF
KEMET/PANASONI
C/TDK/MURATA
100PF
CAPACITOR; SMT (0603); CERAMIC CHIP;
100PF; 50V; TOL=5%; MODEL=C0G; TG=-55
DEGC TO +125 DEGC; TC=COG
CAPACITOR; SMT (0603); CERAMIC CHIP;
1000PF; 100V; TOL=10%; MODEL=C0G; TG=55 DEGC TO +125 DEGC; TC=
CAPACITOR; SMT (1206); CERAMIC CHIP;
KEMET/PANASONI
1UF
1UF; 25V; TOL=10%; MODEL=X7R; TG=-55
C
DEGC TO +125 DEGC; TC=+/MURATA;
CAPACITOR; SMT (1206); CERAMIC CHIP;
SAMSUNG
10UF
10UF; 25V; TOL=10%; TG=-55 DEGC TO +125
ELECTRONICS
DEGC; TC=X7R
CAPACITOR; SMT (0805); CERAMIC CHIP;
TDK
4.7UF
4.7UF; 25V; TOL=10%; MODEL=; TG=-55
DEGC TO +125 DEGC; TC=X7R
CONNECTOR; MALE; SMT; HIGH
ASPSAMTEC
SPEED/HIGH DENSITY OPEN PIN FIELD
134604-01
TERMINAL ARRAY; STRAIGHT; 160PINS
DIODES
DIODE; ZNR; SMT (SOD-323); Vz=3.3V;
3.3V
INCORPORATED
Izm=0.01A
DIODE; SCH; SMT (SOD-323); PIV=30V;
DIODES
B0530WS7-F
IF=0.5A
INCORPORATED
KEMET
1000PF
CONNECTOR; FEMALE; THROUGH HOLE;
SCREW TYPE; GREEN TERMINAL BLOCK;
RIGHT ANGLE; 8PINS
CONNECTOR; MALE; THROUGH HOLE;
PCC02SA
BREAKAWAY; STRAIGHT THROUGH; 2PINS; AN
65 DEGC TO +125 DEGC
CONNECTOR; MALE; THROUGH HOLE;
PCC03SA
BREAKAWAY; STRAIGHT THROUGH; 3PINS; AN
65 DEGC TO +125 DEGC
OSTVN08
A150
Maxim Integrated │ 13
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Bill of Materials (continued)
ITEM
REF DES
DNI/DNP
QTY
MFG PART #
MFG
VALUE
DESCRIPTION
NOTES
CONNECTOR; FEMALE; THROUGH HOLE;
5-1814832TYCO
CONN SOCKET SMA STR DIE CAST PCB;
1
STRAIGHT; 5PINS
SULLINS
CONNECTOR; MALE; THROUGH HOLE;
PBC15SA
ELECTRONICS
BREAKAWAY; STRAIGHT; 15PINS; -65 DEGC
AN
CORP.
TO +125 DEGC
KLDXCONNECTOR; FEMALE; THROUGH HOLE;
KYCON
0202-B
DC POWER JACK; RIGHT ANGLE; 3PINS
CONNECTOR; FEMALE; THROUGH HOLE;
2.54MM PITCH; SIDE WIRE ENTRY
TE CONNECTIVITY 282834-2
STACKING TERMINAL BLOCK ; STRAIGHT;
2PINS; -40 DEGC TO + 105 DEGC
27
J16, J19
-
2
5-1814832-1
28
J17
-
1
PBC15SAAN
29
J20
-
1
KLDX-0202-B
30
J2 1
-
1
282834-2
31
L1, L2
-
2
LPS5030-224ML
COILCRAFT
220UH
32
L3-L6
-
4
XPL2010-333ML
COILCRAFT
33UH
33
R1-R4
-
4
CRCW06031M00JN
VISHAY DALE
1M
VISHAY DALE;
PANASONIC
1K
INDUCTOR; MAGNETICALLY SHIELDED
FERRITE BOBBIN CORE; SMT; 220UH;
TOL=+/-20%; 0.5A; -40 DEGC TO +85 DEGC
INDUCTOR; SMT; MAGNETICALLY
SHIELDED FERRITE BOBBIN CORE; 33UH;
TOL=+/-20%; 0.38A
RESISTOR; 0603; 1M OHM; 5%; 200PPM;
0.10W; METAL FILM
RESISTOR; 0603; 1K; 1%; 100PPM; 0.10W;
THICK FILM
34
R5-R8
-
4
CRCW06031001FK; ERJ3EKF1001V
35
R9-R12
-
4
CRCW0603100RFK; ERJ3EKF1000
VISHAY
DALE/PANASONIC
100
RESISTOR; 0603; 100 OHM; 1%; 100PPM;
0.10W; THICK FILM
36
R13-R20
-
8
VISHAY
TNPW06031K00BE; RG1608PDALE/SUSUMU CO
102-B-T5
LTD.
1K
RESISTOR; 0603; 1K OHM; 0.1%; 25PPM;
0.10W; THICK FILM
0.10%
37
R21-R24
-
4
RN73C1J10RBTG; 1614350-2
TE CONNECTIVITY
10
RESISTOR; 0603; 10 OHM; 0.1%; 10PPM;
0.063W; THICK FILM
0.10%
38
R28, R29, R37
-
3
TNPW060310K0BE;
RN731JTTD1002B
VISHAY DALE/KOA
SPEER
ELECTRONICS
10K
RESISTOR; 0603; 10K OHM; 0.1%; 25PPM;
0.1W; THICK FILM
39
R30-R34, R102, R103
-
7
CRCW060310K0FK;
9C06031A1002FK; ERJ3EKF1002
VISHAY
DALE/YAGEO
PHICOMP/PANAS
ONIC
10K
RESISTOR; 0603; 10K; 1%; 100PPM; 0.10W;
THICK FILM
40
R35
-
1
CRCW06032K10FK
VISHAY DALE
2.1K
RESISTOR; 0603; 2.1K; 1%; 100PPM; 0.10W;
THICK FILM
41
R36, R66, R69
-
3
CRCW060349R9FK
VISHAY DALE
49.9
RESISTOR; 0603; 49.9 OHM; 1%; 100PPM;
0.10W; THICK FILM
www.maximintegrated.com
Maxim Integrated │ 14
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Bill of Materials (continued)
ITEM
REF DES
DNI/DNP
QTY
42
R38, R39
-
2
43
R40-R65
-
44
R67, R68, R104
45
MFG
VALUE
DESCRIPTION
NOTES
TNPW060310K0BE;
RN731JTTD1002B
VISHAY DALE/KOA
SPEER
ELECTRONICS
10K
RESISTOR; 0603; 10K OHM; 0.1%; 25PPM;
0.1W; THICK FILM
0.10%
26
ERJ-3EKF28R0V
PANASONIC
28
RESISTOR; 0603; 28 OHM; 1%; 100PPM;
0.10W; THICK FILM
-
3
CRCW06030000ZS;
MCR03EZPJ000; ERJ3GEY0R00
VISHAY
DALE/ROHM/PANA
SONIC
0
RESISTOR; 0603; 0 OHM; 0%; JUMPER;
0.10W; THICK FILM
R94, R95
-
2
CRCW0603191KFK
VISHAY DALE
191K
46
R96, R98
-
2
ERJ-3EKF3573
PANASONIC
357K
47
R97, R99
-
2
CRCW060349K9FK; ERJ3EKF4992V
VISHAY
DALE/PANASONIC
49.9K
RESISTOR; 0603; 49.9K OHM; 1%; 100PPM;
0.10W; THICK FILM
48
R100, R101
-
2
CRCW06031003FK; ERJ3EKF1003
VISHAY
DALE/PANASONIC
100K
RESISTOR; 0603; 100K; 1%; 100PPM; 0.10W;
THICK FILM
49
TP2, TP5-TP10, TP12,
TP14, TP15, TP17, TP22,
TP24
-
13
5000
KEYSTONE
N/A
TEST POINT; PIN DIA=0.1IN; TOTAL
LENGTH=0.3IN; BOARD HOLE=0.04IN; RED;
PHOSPHOR BRONZE WIRE SILVER PLATE
FINISH;
50
TP21
-
1
5004
KEYSTONE
N/A
TEST POINT; PIN DIA=0.1IN; TOTAL
LENGTH=0.3IN; BOARD HOLE=0.04IN;
YELLOW; PHOSPHOR BRONZE WIRE
SILVER PLATE FINISH;
51
U1, U2, U7
-
3
MAX44242AUA+
MAXIM
52
U3, U4
-
2
MAX44205
MAXIM
53
U5
-
1
MAX11198
MAXIM
MAX1119
8
EVKIT PART-IC; ADC; 16-BIT; 2MSPS; DUAL
SIMULTANEOUS SAMPLING SAR ADCS
WITH INTERNAL REFERENCE; 16L TQFN
2X3 LEAD PITCH 0.5MM
54
U6
-
1
MAX5316GTG+
MAXIM
MAX5316
GTG+
IC; DAC; 16-BIT, +/-1 LSB ACCURACY
VOLTAGE OUTPUT DAC WITH SPI
INTERFACE; TQFN24-EP
55
U8
-
1
74LVC125APW
NXP
74LVC125
APW
IC; BUF; QUAD BUFFER/LINE DRIVER WITH
5V TOLERANT INPUT/OUTPUT; 3-STATE;
TSSOP14
www.maximintegrated.com
MFG PART #
RESISTOR; 0603; 191K OHM; 1%; 100PPM;
0.10W; METAL FILM
RESISTOR; 0603; 357K OHM; 1%; 100PPM;
0.1W; THICK FILM
MAX4424
2AUA+
IC; OPAMP; DUAL OPERATIONAL
AMPLIFIER; UMAX8
IC; LOW-POWER; LOW-DISTORTION; FULLY
MAX4420
DIFFERENTIAL OPERATIONAL AMPLIFIER;
5
OZ02; PKG. CODE: T1233-4;
Maxim Integrated │ 15
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Bill of Materials (continued)
ITEM
REF DES
DNI/DNP
QTY
MFG PART #
MFG
56
U12, U13
-
2
MAX17552ATB+
MAXIM
57
U14
-
1
MAX6126A41+
MAXIM
58
U15
-
1
MAX44244AUK+
MAXIM
59
U16, U17
-
2
74LVC2G125DP
NXP
60
U18
-
1
93LC66BT-I/OT
MICROCHIP
61
U20
-
1
MAX15006BATT+
MAXIM
62
PCB
-
1
MAX11198
MAXIM
63
C60
DNP
0
GMK212B7105KG
TAIYO YUDEN
64
C104, C105
DNP
0
C0603C102K1GAC
KEMET
65
J18
DNP
0
PBC06SAAN
SULLINS
ELECTRONICS
CORP.
66
R25-R27
DNP
0
SEE NOTES
VISHAY DALE
TOTAL
www.maximintegrated.com
VALUE
DESCRIPTION
IC; CONV; ULTRA-SMALL; HIGHMAX1755
EFFICIENCY; SYNCHROMOUS STEP-DOWN
2ATB+
DC-DC CONVERTER; TDFN10-EP
IC; VREF; ULTRA-HIGH PRECISION; ULTRAMAX6126
LOW NOISE; SERIES VOLTAGE
A41
REFERENCE; UMAX8
MAX4424 IC; OPAMP; 36V; PRECISION; LOW-POWER;
4AUK+
90UA; SINGLE OP AMP; SOT23-5
74LVC2G IC; DRV; DUAL BUS BUFFER/LINE DRIVER; 3STATE; TSSOP8
125DP
IC; EPROM; 4K MICROWIRE SERIAL
93LC66BTI/OT
EEPROM; SOT23-6
IC; VREG; ULTRA-LOW QUIESCENTMAX1500
CURRENT LINEAR REGULATOR; TDFN6-EP
6BATT+
3X3
PCB
PCB:MAX11198
CAPACITOR; SMT (0805); CERAMIC; 1UF;
1.0UF
35V; TOL=10%; MODEL=GMK SERIES; TG=55 DEGC TO +125 DEGC; TC=X7R
CAPACITOR; SMT (0603); CERAMIC CHIP;
1000PF 1000PF; 100V; TOL=10%; MODEL=C0G; TG=55 DEGC TO +125 DEGC; TC=
CONNECTOR; MALE; THROUGH HOLE;
PBC06SA
BREAKAWAY; STRAIGHT; 6PINS; -65 DEGC
AN
TO +125 DEGC
RESISTOR; 0603; 20 OHM; 1%; 100PPM;
20
0.10W; THICK FILM
NOTES
-
251
Maxim Integrated │ 16
www.maximintegrated.com
J1
OSTVN08A150
1
SIN2
SIN+
3
COS4
COS+
5
SHIELDS
6
EXCITATION7
EXCITATION+
8
1
+
C1
22UF
2
1
2
1M
R2
R1
1M
1
J2
IN
J26
2
J3
1
2
DAC_OUT_BUFF
1
2
1M
R4
1M
R3
J4
TP1
TP2
1
2
J5
R7
R6
R5
R8
1K
1K
1K
1K
C4
1000PF
C3
1000PF
C2
1000PF
C5
1000PF
4
IN
7
+6.5V
1000PF
IN -6.5V
OUTB
U1
MAX44242AUA+
1000PF
100
100
8
INB+
1000PF
C9
C13
0.1UF
C15
10UF
J9
-6.5V
C17
0.1UF
IN
3
2
1
3
2
1
3
2
1
3
2
1
C16
0.1UF
PLACE CLOSE TO VDD AND VSS PINS OF U1
C7
10UF
100
R10
INB-
+6.5V
U2
MAX44242AUA+
7
OUTB
1000PF
C11
IN
100
R12
8
J8
J7
J6
C14
10UF
4
U1
MAX44242AUA+
VSS
1
OUTA
VDD
IN -6.5V
C12
0.1UF
U2
MAX44242AUA+
VSS
INA+
1
OUTA
INA- VDD
C8
R9
INB-
INB+
C10
R11
INA-
INA+
C6
10UF
IN -6.5V
PLACE CLOSE TO VDD AND VSS PINS OF U2
+6.5V IN
6
5
2
3
6
5
2
3
+6.5V IN
TP8
TP4
TP7
TP6
TP3
TP5
AIN2+
AIN2-
AIN1+
AIN1-
0.1%
0.1%
R16
IN
1K
0.1%
C19
0.1UF
1K
IN
C18
0.1UF
1K
1K
0.1%
REFIN/2
R15
R14
REFIN/2
R13
2
C28
IN
1K
IN
1 VOCM
SHDN
IN+
VOCM
IN-
OUT+
1K
1000PF
1000PF
1K
IN -6.5V
5
OUTGND
C23
R20
0.1%
-6.5V
1000PF
1K
IN
5
OUTGND
+5V
6
6
4
0.1UF
2
3 U4
MAX44205
VS+
VCLPH
OUT+
C29
0.1%
0.1%
IN
IN +6.5V
VCLPL
VSNC
7
EP
8
11
13
10
1
12
9
R19
C22
C21
R18
VCLPL
VSNC
7
EP
8
11
13
10 IN+
4
0.1UF
+5V
0.1%
+6.5V
1000PF
3
U3
SHDN
MAX44205
VS+
12 INVCLPH
9
R17
C20
OUT
OUT
BUFOUT1+
BUFOUT1-
C32
0.1UF
C34
10UF
BUFOUT2-
BUFOUT2+
C31
10UF
C33
0.1UF
C35
10UF
C37
0.1UF
-6.5V
C36
0.1UF
IN
PLACE CLOSE TO VS+ AND VS- PINS OF U4
+6.5V IN
OUT
OUT
C30
10UF
IN -6.5V
PLACE CLOSE TO VS+ AND VS- PINS OF U3
+6.5V IN
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Schematics
Maxim Integrated │ 17
BUFOUT2- IN
BUFOUT2+ IN
BUFOUT1- IN
BUFOUT1+ IN
R24
R23
R22
R21
0.1%
0.1%
0.1%
0.1%
10
10
10
10
J10
C38
1UF
2
1
C39
0.1UF
J11
2
1
C40
0.1UF
NR
3
C42
1000PF
C41
1000PF
1
IN
GND
GNDS
2
OUTF
OUTS
8
10UF
AIN1AIN2+
3
AIN2-
AIN1+
2
6
12
U5
MAX11192
9
11
0.1UF
13
1
4
C46
C47
1
14
0.1UF
J12
1
15
10UF
2
1
C43
4
1.0UF
C45
C44
R25
20
DNI
+5V IN
5
7
6
AVDD
REFGND
I.C.
I.C.
16
17
10
7
8
DOUT1
DOUT2
10UF
0.1UF
C49
2
C48
5
J13
2
SCLK
J14
CNVST
VREF
REF1
REFIN/OUT
OGND
+5V IN
OUT
REF2
U14
MAX6126A41
OVDD
EP
www.maximintegrated.com
AGND
OUT
DOUT2_ADC
DOUT1_ADC
SCLK_ADC
IN
OUT
CNVST_ADC
10UF
C51
IN
0.1UF
0.1UF
C53
C50
10UF
C52
20
DNI
R27
20
DNI
R26
+6.5V
2
INA-
INA+
3
1
TP11
0.1UF
C55
2
VSS
R104
J15
0
1UF
C54
OUT
IN
R29
10K
0.1%
R28
10K
0.1%
U8_VCC
VADJ
TP13
TP12
EXT_OVDD
5 U15
MAX44244AUK+
VDD
1
OUTA
TP10 REF2
TP9 REF1
4
3
IN
C56
0.1UF
OUT
REFIN/2
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Schematics (continued)
Maxim Integrated │ 18
VADJ IN
+5V IN
PD_DAC IN
TC/SB_DAC IN
RST_DAC IN
DIN_DAC IN
SCLK_DAC IN
CS_DAC IN
LDAC IN
VREF IN
10K
10K
10K
10K
10K
R31
R32
R33
R34
1.0UF
R30
C58
C59
1.0UF
C57
10UF
C60
1.0UF
DNI
IN
IN
IN
IN
IN
20
9
8
1
23
5
6
7
3
16
BYPASS
PD
TC/SB
M/Z
RST
DIN
SCLK
CS
PD_DAC
TC/SB_DAC
RST_DAC
CS_DAC
LDAC
22
LDAC
REF
C63
0.01UF
D1
3.3V
C62
0.01UF
C61
0.1UF
VDDIO
19
12
A
21 11 17 18 10
DGND
AVDD2
AGND_S
C
B0530WS-7-F
AGND
VADJ IN
C
A
AVDD1
D2
AGND_F
VREF IN
C64
0.01UF
OUT
BUSY
RFB
READY
DOUT
REF0
25
13
2
14
24
4
15
U6
MAX5316GTG+
EP
www.maximintegrated.com
AVSS
+5V IN
C66
C67
10UF
R36
49.9
2.1K
100PF
R35
C65
0.1UF
10K
R37
BUSY_DAC
C68
0.01UF
OUT
VADJ
READY_DAC
OUT
IN
DOUT_DAC
OUT
VREF IN
R38
0.1%
10K
R39
C69
10K
-6.5V IN
3
2
+6.5V IN
0.1%
1000PF
INA+
INA-
4
0.1UF
1.0UF
C71
C70
1
1.0UF
0.1UF
U7
MAX44242AUA+
VDD
OUTA
VSS
8
C73
C72
5 INB+
6 INB-
OUTB
7
U7
MAX44242AUA+
OUT
DAC_OUT_BUFF
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Schematics (continued)
Maxim Integrated │ 19
C75
1UF
C74
1UF
3V3_FPGA
+12V_FPGA
3V3_FPGA OUT
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
30
31
29
30
31
32
33
34
35
36
37
38
39
40
D30
D31
D32
D33
D34
D35
D36
D37
D38
D39
D40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
CON1
ASP-134604-01
28
28
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
H40
H39
H38
H37
H36
H35
H34
H33
H32
H31
H30
H29
H28
H27
H26
H25
H24
H23
H22
H21
H20
H19
H18
H17
H16
H15
H14
H13
H12
H11
H10
H9
H8
H7
H6
H5
H4
H3
H2
H1
G40
G39
G38
G37
G36
G35
G34
G33
G32
G31
G30
G29
G28
G27
G26
G25
G24
G23
G22
G21
G20
G19
G18
G17
G16
G15
G14
G13
G12
G11
G10
G9
G8
G7
G6
G5
G4
G3
G2
G1
CON1
ASP-134604-01
40
39
38
37
36
35
34
33
32
29
27
27
D28
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
D29
D27
26
4
D4
3
2
3
D3
1
2
D2
CON1
ASP-134604-01
1
CON1
ASP-134604-01
D1
VADJ
C76
1UF
R45
R44
R43
R42
R41
R40
VADJ
R65
R64
R63
R62
R61
R60
R59
R58
R57
R56
R55
R54
R53
R52
R51
R50
R49
R48
R47
R46
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
SYNC_CLK_OUT
OUT
DOUT2_ADC_BUFF
READY_DAC
IN
IN
OUT
OUT
OUT
DOUT_DAC
DIN_DAC
CS_DAC
SCLK_ADC
SCLK_DAC
OUT TC/SB_DAC
OUT LDAC
OUT BUSY_DAC
OUT RST_DAC
OUT
IN
DOUT1_ADC_BUFF
IN SCLK_ADC_BUFF
IN
OUT DIN_ADC
OUT CNVST_ADC
OUT PD_DAC
SYNC_CLK_IN
IN
IN
5 4 3 2
SYNC_CLK_OUT
IN
1
J16
SYNC_CLK_IN
SO_EEPROM_FPGA
5
4
3
2
www.maximintegrated.com
TP14
49.9
R66
SYNC_CLK_OUT
1
0
R67
C77
1UF
1
2
3
4
5
6
1A
2OE
2
7
GND
4
2Y
1Y
2OE
2A
5
1A
7
1OE
1
2
GND
4
U17
74LVC2G125DP 8
VCC
2Y
1Y
3V3_FPGA
2A
1OE
1
U16
74LVC2G125DP 8
VCC
5
J18
DO
1
3
6
C80
1000PF
3
6
C79
1000PF
PBC06SAAN
DNI
DI
VSS
2
49.9
R69
0
R68
1
1
5
IN
4
3
OUT
J19
SYNC_CLK_OUT
TP15
SYNC_CLK_IN
SO_EEPROM_FPGA
C82
0.1UF
C81
0.1UF
OUT
U18
6
93LC66BT-I/OT
VCC
CLK
CS
3V3_FPGA
3
4
5
C78
0.1UF
3V3_FPGA
SCLK_ADC
DOUT2_ADC IN
DOUT1_ADC IN
2
3
4
5
2A
2OE
3A
3OE
4A
5
4
9
10
12
2
GND
TP16
SYNC_CLK_IN
4OE
1OE
1
13
1A
IN
2
U8_VCC
7
GND
VCC
14
C84
0.1UF
4Y
3Y
2Y
1Y
11
8
6
3
U8
74LVC125APW
J17
OUT
OUT
OUT
C85
1UF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CNVST_ADC
DIN_ADC
DOUT1_ADC_BUFF
DOUT2_ADC_BUFF
SCLK_ADC
SCLK_ADC_BUFF
TC/SB_DAC
LDAC
BUSY_DAC
CS_DAC
SCLK_DAC
DIN_DAC
DOUT_DAC
SCLK_ADC_BUFF
DOUT2_ADC_BUFF
DOUT1_ADC_BUFF
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Schematics (continued)
Maxim Integrated │ 20
GND
J20
KLDX-0202-B
TP17
3
2
3
2
1
1
EXT_+12V
1
2
C
MBR0520L
D3
EXT_+12V IN
+12V_FPGA IN
A
J22
1
2
3
1
2
C100
22UF
J23
1
+
C101
22UF
R95
191K
R94
191K
2
1
+
2
C105
DNI
C103
1UF
C104
DNI
C102
1UF
8
4
3
2
1
8
4
3
2
1
EP
11
RESET
FB
VOUT
GND
LX
MODE
SS
EP
11
RT/SYNC
EN/UVLO
IN
RESET
FB
VOUT
GND
LX
U13
MAX17552ATB+
MODE
SS
RT/SYNC
EN/UVLO
IN
U12
MAX17552ATB+
7
5
6
9
7
5
6
9
10
10
1
1
L2
220UH
L1
220UH
2
2
C109
10UF
C108
1000PF
C107
10UF
C106
1000PF
R99
49.9K
R98
357K
R97
49.9K
R96
357K
1
TP19
J25
TP18
J24
R101
100K
R100
100K
1
2
2
1
2
L4
33UH
2
2
2
XPL2010-333ML
L6
33UH
C112
4.7UF
XPL2010-333ML
L5
33UH
TP21
-6.5V
TP20
TP23
C113
4.7UF
XPL2010-333ML
C110
4.7UF
1
1
L3
33UH
XPL2010-333ML
C111
4.7UF
1
TP22
+6.5V
A
K
TERM_BLK
OUT
R103
10K
+6.5V
OUT
C115
0.1UF
DS2
GREEN
C114
1UF
DS1
GREEN
R102
10K
A
www.maximintegrated.com
K
J21
-6.5V
2
1
OUT
IN
GND EP NC
3
OUT
IN
U20
MAX15006BATT+
7
6
5
4
C116
10UF
+5V
50MA
TP24
TP25
GND
OUT
+5V
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit Schematics (continued)
Maxim Integrated │ 21
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit PCB Layout Diagrams
MAX11198 EV Kit—Top Silkscreen
MAX11198 EV Kit—Top Paste
MAX11198 EV Kit—Top Mask
MAX11198 EV Kit—Top
www.maximintegrated.com
Maxim Integrated │ 22
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit PCB Layout Diagrams (continued)
MAX11198 EV Kit—Internal 2
MAX11198 EV Kit—Internal 3
MAX11198 EV Kit—Internal 4
MAX11198 EV Kit—Internal 5
www.maximintegrated.com
Maxim Integrated │ 23
MAX11198 Evaluation Kit
Evaluates: MAX11198
MAX11198 EV Kit PCB Layout Diagrams (continued)
MAX11198 EV Kit—Bottom Silkscreen
MAX11198 EV Kit—Bottom Paste
MAX11198 EV Kit—Bottom Mask
MAX11198 EV Kit—Bottom
www.maximintegrated.com
Maxim Integrated │ 24
MAX11198 Evaluation Kit
Evaluates: MAX11198
Ordering Information
PART
TYPE
MAX11198EVKIT#
EVKIT
#Denotes RoHS compliant.
Contact Avnet to purchase a ZedBoard (AES-Z7EV-7Z020-G) to
communicate with the MAX11198 EV kit.
www.maximintegrated.com
Maxim Integrated │ 25
MAX11198 Evaluation Kit
Evaluates: MAX11198
Revision History
REVISION
NUMBER
REVISION
DATE
0
10/17
DESCRIPTION
Initial release
PAGES
CHANGED
—
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2017 Maxim Integrated Products, Inc. │ 26
工商网监
湘ICP备2023018690号
