MAX14743AEWC+T

      MAX14743 Over Voltage and Surge Protected Dual SPDT Data Line Switch Protect the data line from a high-voltage short or surge event   Description The MAX14743/MAX14743A are 2 x SPDT switches with overvoltage protection intended for use with portable devices. As the high-voltage charging solution starts to spread out, a data line short event to the high-voltage VBUS can result in either charger misdetection or permanent damage to the portable device. The MAX14743/MAX14743A are designed to protect the downstream data line from a high-voltage short or surge event. The device combines low on-capacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications in portable electronics.The MAX14743/MAX14743A feature internal positive overvoltage, negative overvoltage, and surge protection. The devices handle USB low/full/high-speed signaling and operate from a 2.7V to 5.5V supply. The MAX14743/MAX14743A are available in a 12-bump (1.22mm x 1.62mm) waferlevel package (WLP) and operates over the -40°C to +85°C extended temperature range. Key Features   Distortion-Free, High-Speed Signaling o Dual SPDT o Signal Range: -1V to +3.5V o RON: 5.5Ω (typ) o CON: 4.5pF (typ) o Bandwidth > 1GHz Flexible System Design o Separate Control for Each Switch Path o Active Low EN to Save Supply Current Active Low FLAG Signals Fault Event 12-Bump WLP (1.22mm x 1.62mm) Package -40°C to +85°C Operating Temperature Range Robust and Safety o Positive Overvoltage Protection up to +12.5V o Hot Plug-In Robustness: MAX14743A o o o  Applications/Uses    Phablets Smartphones Table     Pricing Notes: This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor. Device Fab Process Technology Sample size Rejects FIT at 25°C FIT at 55°C Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.       https://www.maximintegrated.com/en/products/power/protection‐control/protection‐ics/MAX14743.html/tb_tab3 7‐12‐18