MAX20048EVKIT
Evaluation Kit for the MAX20048
Description
The MAX20048 evaluation kit (EV kit) is a fully assembled and tested application circuit
for the MAX20048 currentmode buck-boost controller IC. The EV kit is designed to
deliver up to 16A (max) input current with input voltages from 2V to 36V. The outputvoltage accuracy is ±2% within the normal 9V to 18V operation input range and a ±3%
accuracy in the 2V to 18V range. Voltage quality can be monitored by observing the
PGOOD signal.
The IC offers 5V fixed output voltage and a 4V to 25V OUT programmable range.
Switching frequency is adjustable from 220kHz to 2.2MHz, which allows for small
external components, reduced output ripple, and guarantees no AM interference. The
IC automatically enters skip mode at light loads with low 55μA quiescent current at no
load. The IC comes with a spread-spectrum frequency-modulation option designed to
minimize EMI-radiated emissions and a SYNCOUT option that outputs 180° out-ofphase clock.
Key Features
2V to 36V Input Supply Range
Delivers Up to 16A Input Current
Enable Input
Frequency Synchronization Input
Voltage-Monitoring PGOOD Output
BIAS Voltage-Monitoring Test Point
Fully Assembled and Tested
Proven PCB Layout
Applications/Uses
Instrument Cluster
Point of Load Power Supply
Remote Display
Start-Stop Systems
USB Power
Device
MAX20048EVKIT#*
Fab
Process
Technology
Sample
size
Rejects
FIT at
25°C
FIT at
55°C
Contact reliability engineer for information
Note : The failure rates are summarized by technology and mapped to the associated material
part numbers. The failure rates are highly dependent on the number of units tested.
https://www.maximintegrated.com/en/products/power/switching‐regulators/MAX20048EVKIT.html/tb_tab0/8‐2‐19
很抱歉,暂时无法提供与“MAX20048EVKIT#”相匹配的价格&库存,您可以联系我们找货
免费人工找货